The introduction of the Iau 1980 nutation theory in the computation of the Earth Rotation Parameters by the Bureau International de l'Heure

Summary The status of nutation theory in the computation of the Earth Rotation Parameters from the different observational techniques is reviewed. The impact on the combined solution of the Bureau International de l'Heure is evaluated. In view of the improvement brought by the IAU 1980 Nutation Theory, its introduction in the BIH publications, without waiting for the adoption by the astronomical ephemerides (1984 Jan. 1) is decided.     

Buchbesprechungen

Ohne Zusammenfassung     

Emerging transitions in organic waste infrastructure in Aotearoa New Zealand

Aotearoa New Zealand is at a critical juncture in reducing and managing organic waste. Research has highlighted the significant proportion of organic waste sent to landfills and associated adverse effects such as greenhouse gas emissions and loss of valuable organic matter. There is current debate about what practices and infrastructure to invest in to better manage and use organic waste. We highlight the diversity of existing organic waste practices and infrastructures, focusing on Auckland, Wellington and Christchurch. We show how debates about organic waste practices and infrastructure connect across three themes: waste subjectivities, collective action in place and language.     

Economics of climate policy and collective decision making

This paper explores the reasons why economic instruments of climate change are reluctantly applied and stresses the need for interdisciplinary research linking economic theory and empirical testing to deliberative political procedures. It is divided in three parts. The first one recalls the main issues in implementing Cost-Benefit Analysis such as information problems, uncertainties, discounting the future and irreversibilities. The second part shows how these issues can be treated in integrated assessment and techno-economic models and presents a case study, which shows that

• The chosen scenario tends to stabilize atmospheric CO₂ concentration at around 550 ppm in the long run.
• Exclusion of possibility to trade CO₂ emission permits under a cap regime would increase the cost of emission abatement for OECD countries.
• Combining different flexibility instruments might lead to significant gains in the overall cost of climate policy.

The third part presents results of a survey conducted among the main economic and environmental associations in Switzerland. The survey reveals conflicting views on economic instruments. It shows how the social acceptability of these instruments can be improved in taking explicitly into account these opposing views of special interest groups. Therefore, policy scenarios should be selected in combining techno-economic models with empirical studies about their political and normative context.     

Fluid–rock interactions related to metamorphic reducing fluid flow in meta-sediments: example of the Pic-de-Port-Vieux thrust (Pyrenees,Spain)

In orogens, shortening is mainly accommodated by thrusts, which constitute preferential zones for fluid–rock interactions. Fluid flow, mass transfer, and mineralogical reactions taking place along thrusts have been intensely investigated, especially in sedimentary basins for petroleum and uranium research. This study combines petrological investigations, mineralogical quantifications, and geochemical characterizations with a wide range of analytical tools with the aim of defining the fluid properties (nature, origin, temperature, and redox) and fluid–host rock interactions (mass transfers, recrystallization mechanisms, and newly formed synkinematic mineralization) in the Pic-de-Port-Vieux thrust fault zone (Pyrenees, Spain). We demonstrate that two geochemically contrasted rocks have been transformed by fluid flow under low-grade metamorphism conditions during thrusting. The hanging-wall Triassic red pelite was locally bleached, while the footwall Cretaceous dolomitic limestone was mylonitized. The results suggest that thrusting was accompanied by a dynamic calcite recrystallization in the dolomitic limestone as well as by leaching of iron via destabilization of iron oxides and phyllosilicate crystallization in the pelite. Geochemical and physical changes highlighted in this study have strong implications on the understanding of the thrust behavior (tectonic and hydraulic), and improve our knowledge of fluid–rock interactions in open fluid systems in the crust.     

The Pb-Sr-Nd isotope geochemistry of some recent circum-Mediterranean granites

Pb, Sr and Nd isotopic compositions have been analyzed in recent granites from Northern Africa, Northern Italy and Greece. Lead isotope compositions of K-feldspars are rather homogeneous, and cluster close to the modern lead of Stacey and Kramers (1975) but with slightly higher²⁰⁷Pb/²⁰⁴Pb and²⁰⁸Pb/²⁰⁴Pb ratios. The Cyclades samples, however, have higher²⁰⁶Pb/²⁰⁴Pb ratios. Addition of mantle-derived lead was probably very limited, which supports a quasi-closed system evolution of this element in the continental crust. The Sr, Nd data fall in the enriched part of the¹⁴³Nd/¹⁴⁴Nd vs.⁸⁷Sr/⁸⁶Sr diagram and define a smooth hyperbolic mixing curve. Over a wide area, straddling different orogens, most granites may be accounted for by a binary mixture between a recycled crustal component and a depleted mantle-like component. No correlation is observed between either Pb and Sr or Nd isotopic ratios, or any isotopic ratio and major element contents. Quantitative modelling suggests that two cases fit the Sr and Nd characteristics of these granites: they both require anatexis of the crust on a scale large enough to average the isotopic properties of heterogeneous terranes. In the first case, the mantle-derived component may be represented by differentiated Island Arc-type magmas, and the granites result from mixing these magmas with anatectic melts. In the second case, mantle-derived igneous rocks, such as obducted ophiolites, are part of the crustal source and their variable involvement in the anatectic process causes isotopic variations.CRPG Contribution n 630.     

Aqueous Cr(VI) reduction by pyrite: Speciation and characterisation of the solid phases by X-ray photoelectron, Raman and X-ray absorption spectroscopies

Optical microscopy, confocal Raman micro-spectrometry, X-ray photoelectron micro-spectroscopy (XPS) and synchrotron based micro-X-ray fluorescence (XRF), micro-X-ray absorption near edge spectroscopy (XANES) and micro-extended X-ray absorption fine structure (EXAFS) were used to investigate the reduction of aqueous Cr(VI) by pyrite. Special emphasis was placed on the characterisation of the solid phase formed during the reaction process. Cr(III) and Fe(III) species were identified by XPS analyses in addition to non-oxidised pyrite. Optical microscopy images and the corresponding Raman spectra reveal a strong heterogeneity of the samples with three different types of zones. (i) Reflective areas with E_g and A_g Raman wavenumbers relative to non-oxidised pyrite are the most frequently observed. (ii) Orange areas that display a drift of the E_g and A_g pyrite vibration modes of −3 and −6 cm⁻¹, respectively. Such areas are only observed in the presence of Cr(VI) but are not specifically due to this oxidant. (iii) Bluish areas with vibration modes relative to a corundum-like structure that can be assigned to a solid solution Fe_2−xCr_xO₃, x varying between 0.2 and 1.5. The heterogeneity in the spatial distribution of chromium observed by optical microscopy and associated Raman microspectroscopy is confirmed by μ-XRF. In agreement with both solution and XPS analyses, these spectroscopies clearly confirm that chromium is in the trivalent state. XANES spectra in the iron K-edge pre-edge region obtained in rich chromium areas reveal the presence of ferric ion thus revealing a systematic association between Cr(III) and Fe(III). In agreement with Raman analyses, Cr K-edge EXAFS can be interpreted as corresponding to Cr atoms involved in a substituted-type hematite structure Fe_2−xCr_xO₃.     

Natural speciation of Ni, Zn, Ba, and As in ferromanganese coatings on quartz using X-ray fluorescence, absorption, and diffraction

The mineralogy of natural ferromanganese coatings on quartz grains and the crystal chemistry of associated trace elements Ni, Zn, Ba, and As were characterized by X-ray microfluorescence, X-ray diffraction, and EXAFS spectroscopy. Fe is speciated as ferrihydrite and Mn as vernadite. The two oxides form alternating Fe- and Mn-rich layers that are irregularly distributed and not always continuous. Unlike naturally abundant Fe-vernadite, in which Fe and Mn are mixed at the nanoscale, the ferrihydrite and vernadite are physically segregated and the trace elements clearly partitioned at the microscopic scale. Vernadite consists of two populations of interstratified one-water layer (7 Å phyllomanganate) and two-water layer (10 Å phyllomanganate) crystallites. In one population, 7 Å layers dominate, and in the other 10 Å layers dominate. The three trace metals Ni, Zn, and Ba are associated with vernadite and the metalloid As with ferrihydrite. In vernadite, nickel is both substituted isomorphically for Mn in the manganese layer and sorbed at vacant Mn layer sites in the interlayer. The partitioning of Ni is pH-dependent, with a strong preference for the first site at circumneutral pH and for the second at acidic pH. Thus, the site occupancy of Ni in vernadite may be an indicator of marine vs. continental origin, and in the latter, of the acidity of streams, lakes, or soil pore waters in which the vernadite formed. Zinc is sorbed only in the interlayer at vacant Mn layer sites. It is fully tetrahedral at a Zn/Mn molar ratio of 0.0138, and partly octahedral at a Zn/Mn ratio of 0.1036 consistent with experimental studies showing that the ^VIZn/^IVZn ratio increases with Zn loading. Barium is sorbed in a slightly offset position above empty tetrahedral cavities in the interlayer. Arsenic tetrahedra are retained at the ferrihydrite surface by a bidentate-binuclear attachment to two adjacent iron octahedra, as commonly observed. Trace elements in ferromanganese precipitates are partitioned at a few, well-defined, crystallographic sites that have some elemental specificity, and thus selectivity. The relative diversity of sorption sites contrasts with the simplicity of the layer structure of vernadite, in which charge deficit arises only from Mn⁴⁺ vacancies (i.e., no Mn³⁺ for Mn⁴⁺ substitution). Therefore, sorption mechanisms primarily depend on physical and chemical properties of the sorbate and competition with other ions in solution, such as protons at low pH for Ni sorption.     

Surface chemistry and structural properties of mackinawite prepared by reaction of sulfide ions with metallic iron

Tetragonal FeS_1−x mackinawite, has been synthesized by reacting metallic iron with a sodium sulfide solution and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), transmission Mössbauer spectroscopy (TMS) and X-ray photoelectron spectroscopy (XPS). Based on XRD and TEM analyses, synthetic mackinawite exhibits crystallization and is identical to the natural mineral. Unit cell parameters derived from XRD data are a = b = 0.3670 nm and c = 0.5049 nm. The bulk Fe:S ratio derived from the quantitative dispersive energy analysis is practically 1. XPS analyses, however, showed that mackinawite surface is composed of both Fe(II) and Fe(III) species bound to monosulfide. Accordingly, monosulfide is the dominant S species observed at the surface with lesser amount of polysulfides and elemental sulfur. TMS analysis revealed the presence of both Fe(II) and Fe(III) in the mackinawite structure, thus supporting the XPS analysis. We propose that the iron monosulfide phase synthesized by reacting metallic iron and dissolved sulfide is composed of Fe(II) and S(-II) atoms with the presence of a weathered thin layer covering the bulk material that consists of both Fe(II) and Fe(III) bound to S(-II) atoms and in a less extent of polysulfide and elemental sulfur.