On the structural evolution of the Central Trough in the Norwegian and Danish sectors of the North Sea

The Central Trough of the North Sea is not a simple rift graben. It is an elongated area of regional subsidence which was initiated in mid Cretaceous times and continued to subside through to the late Tertiary. Its form is not representative of pre-mid Cretaceous tectonics.In Late Permian times the North Sea was divided into a northern and southern Zechstein basin by the E-W trending Mid North Sea-Ringkøbing-Fyn High. The latter was dissected by a narrow graben trending NNW through the Tail End Graben and the Søgne Basin. The Feda Graben was a minor basin on the northern flank of the Mid North Sea High at this time. This structural configuration persisted until end Middle Jurassic times when a new WNW trend separated the Tail End Graben from the Søgne Basin. Right lateral wrench movement on this new trend caused excessive subsudence in the Tail End and Feda Grabens while the Søgne Basin became inactive.Upper Jurassic subsidence trends continued during the Early Cretaceous causing the deposition of large thicknesses of sediments in local areas along the trend. From mid Cretaceous times the regional subsidence of the Central Trough was dominant but significant structural inversions occurred in those areas of maximum Early Cretaceous and Late Jurassic subsidence.     

Evidence for microbiological manganese oxidation in the river Tamar Estuary, South West England

Water samples from the Tamar Estuary oxidized manganese when supplemented with Mn²⁺ (2 mgl⁻¹). The rates of oxidation were depressed in the presence of various metabolic inhibitors. The effect of Mn²⁺ and temperature on the rate of manganese oxidation suggested that a biological process was largely responsible for converting Mn²⁺ to Mn⁴⁺. Rates of manganese oxidation were much higher in freshwater (3·32 μgl⁻¹ h⁻¹ in water containing 30 mgl⁻¹ of suspended matter) than in saline water (0·7 μgl⁻¹ h⁻¹ in water of salinity 32‰) containing the same amount of particulate matter. The rate of manganese oxidation was proportional to the particulate load (up to 100 mgl⁻¹ particulates).     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

Seasonal cycles and long-term trends of plankton in shelf and oceanic habitats of the Norwegian Sea in relation to environmental variables

The plankton abundance data of the Continuous Plankton Recorder (CPR) route from Bergen or Rotterdam to Weather Station Mike (6444^′N, 2E) from 1949 to 1981 were analysed for long-term trends and seasonal production cycles, and were related to environmental data. The data were explored using the canonical correlation analysis and nonparametric techniques like the Nadaraya–Watson regression. While large copepods such as Calanus spp. and Metridia lucens did not show any temporal trends, a sharp decrease in the abundances of smaller copepods and phytoplankton was observed after 1960. The temporal trends were not related to the NAO, but did show a correlation with the wind direction. Seasonal abundance curves showed that production of both phytoplankton and zooplankton taxa started earlier in coastal water compared to Atlantic water. From the 1950s to the 1970s most taxa showed a delay in the start of the seasonal production cycles, indicating a reduction in the length of the productive cycle. This may to some extent explain the reduced abundance of smaller copepods, phytoplankton and other species during the 1960s and 1970s.     

Palynology and petroleum potential of the Kazhdumi Formation (Cretaceous: Albian–Cenomanian) in the South Pars field,northern Persian Gulf

The Kazhdumi Formation of the Bangestan Group is a well-known source rock that has produced abundant oil in most petroleum fields in the Zagros Basin, which stretches from northwest to southwest Iran over hundreds of kilometres. The formation reaches a thickness of 230 m at the type section in northwest Zagros but thins out to 40–50 m in wells studied from the South Pars giant petroleum field, where it comprises mainly grey shales with occasional intercalations of marls and sandstones. South Pars, best known as the Iranian part of the world's largest non-associated gas field, contains small quantities of oil above and below the Kazhdumi Formation.     

The effect of bedform dynamics on computing suspended sediment fluxes using optical backscatter sensors and current meters

The sensitivity of the suspended sediment flux is tested with respect to rapid changes in bed-level across the surf zone of a sandy beach. The suspended flux was computed using a fixed instrument array, but bed-level changes due to ripple migration caused the instrument elevations to be significantly changed during the course of the experiment. The nominal elevations of the instruments were adjusted during data processing (using the MOBS array) to maintain a fixed elevation with respect to bed-level changes. The resultant suspended sediment concentrations and fluxes were significantly different from the unadjusted data, and for the present data set O(35%) less when averaged over the tide. The maximum difference between adjusted and unadjusted fluxes may be O(260%). The results indicate that changes in bed-level, particularly those due to bedform migration, must be accounted for when processing OBS data if reliable estimates of suspended sediment transport are to be obtained in the field.     

Ocean coast effect on magnetotelluric data: a case study from Kachchh, India

The effects of the ocean coast on magnetotelluric (MT) data have been studied and results are described in this article. MT soundings from various sites along coastal plains of Kachchh were acquired where volcanic rocks overlie Mesozoic sediments having potential resource prospects. The region of our study lies in the proximity of Gulf of Kachchh and Arabian Sea. This article describes the effects the presence of a conductive body on the acquired MT data. With the help of synthetic MT modelling and induction arrows we demonstrate the influence of shallow conductive body on the MT data. The modelling results when compared to the field observations show that much of the high frequencies are unaffected by the coast, however low frequencies of the data do seem to be distorted by onshore–offshore resistivity contrasts. The least affect on high frequencies can be attributed to very shallow water depth as well as to the fact that the onshore–offshore resistivity contrasts are not large enough to influence the high frequency data badly. The results presented here report for the first time the effect of the coast on the analysis on MT data from Kachchh. Due to several academic as well as industrial onshore–offshore MT experiments presently being carried out to explore its hydrocarbon potential, our results have an important bearing on designing and acquisition of future MT surveys in this region.     

Landscape-scale analysis of ecosystem risk and returns: A new tool for ICZM

Management of the coastal zone often focuses on “islands” of high value ecosystems, in terms of economic value or conservation. However, integrated management requires landscape-level analysis of all ecosystem values. The biodiversity portfolio analysis (BPA) method is derived from the logic used in share (equity) portfolio management in terms of balancing within a portfolio the returns with the risks. Optimising the returns from a share portfolio, or a suite of ecosystems in a landscape, is dependent on the relationship between the units in terms of risk and return. Three case studies are then presented to test the applicability of the BPA method at the international (North West Europe), regional (Durham Heritage Coast, UK) and local (part of South Uist, Outer Hebrides, UK) spatial scale. The Biodiversity Portfolio Analysis for NW Europe showed that risk and return were highly correlated in the studied Member States. The ranking of risk and return, with the highest first, was Ireland > UK > France=Netherlands > Belgium. For these Member States the risks to ecosystem service provision were positively correlated with GNI (r=0.97, P<0.01); suggesting that the higher the economic importance of coastal and marine resources in a Member State the more at risk the resources are. The regional and local case studies were more focussed on providing information on which to base Integrated Coastal Zone Management (ICZM) decision making; both case studies used stakeholder participation to determine risks and returns. The conclusions from these two case studies show how the BPA method can be useful in terms of setting ICZM priorities and in addressing local coastal issues. The BPA involves making a number of assumptions, however, it does provide coastal managers with a potential tool to strategically plan due to increased awareness of the interaction between the ecosystems in the portfolio.There is a need for such techniques, which involve stakeholder participation and which create objective outcomes, to support the implementation of ICZM.     

Rapid visualization of plankton abundance and taxonomic composition using the Video Plankton Recorder

Traditional methods for determining spatial distributions of planktonic taxa involve net, pump, and bottle collections followed by the tedious and time-consuming task of plankton sample analysis. Thus, plankton ecologists often require months or even years to process samples from a single study. In this paper, we present a method that allows rapid visualization of the distribution of planktonic taxa while at sea. Rapid characterization of plankton distributions is essential in the dynamic physical environment, where biological and physical patterns can change quickly. Such a “sample-and-observe” capability is necessary for mapping ephemeral features (such as patches, eddies, jets, plumes) and determining appropriate locations to conduct more localized sampling, including in situ observational studies. We describe the techniques used in imaging the plankton, analyzing the video, and visualizing the data. We present an example of at-sea data analysis conducted aboard R.V. Columbus Iselin on Georges Bank in May 1994 and visualizations of the 3-dimensional distribution of selected planktonic taxa in a 2 × 2 km × 90 m volume of seawater. A video of the image processing and visualization is included on the CD-ROM accompanying this volume and is an essential part of this paper.     

Using Mean Sea Surface Topography for Determination of Height System Differences across the Baltic Sea

The mean sea surface topography in the Baltic Sea and adjacent waters is reliably known in the Nordic height system NH 60. Using this knowledge we estimate differences between NH 60, based on the Amsterdam zero point, and Russian, Polish, and German height systems along the southeastern coast of the Baltic Sea, based on the Kronstadt zero point. The differences agree within a few centimeters. We also make a simple study of the mean sea level difference between Kronstadt and Amsterdam (which is found to have been approximately 25 cm when sea level was still to be seen there).