Heat wave risk assessment and mapping in urban areas: case study for a midsized Central European city,Novi Sad (Serbia)

Risk assessment and mapping methodologies for heat waves as frequently occurring hazards in central and southeastern Europe were applied in this study, and the impact of heat waves on the mortality of urban populations was determined as part of the assessment. The methodology for conducting the heat wave risk assessment is based on European Commission’s Guidelines for Risk Assessment and Mapping. The Novi Sad (Serbia) urban area was studied during summer 2015, which was one of the hottest summers in the last few decades. In situ air temperature measurements from urban stations and mortality of urban populations were used. Nocturnal urban heat island (UHI) intensity values between the various built-up zones and natural surrounding areas were used for the hazard level calculation. Temperature data from 9 p.m. to 5 a.m. were used because during the night, the UHI intensity reached its maximum values. The average daily number of deaths by LCZs was used to define the impact level of the vulnerability index. Calculations for both hazard levels were completed during two intensive heat waves (in July and August 2015) when it was expected that there may be a high level of risk. The results and maps show that the urban area is complex, and the heat wave risk on the population is not uniform. The most densely built-up areas (LCZs 2, 5 and 6) have very high or high risk values that are influenced by a higher rate of mortality. The obtained results and maps can be used by local authorities to prevent and mitigate climate-related hazards, for medical institutions as well as urban planners and for ancillary local, regional or national services. According to these results, the local authorities could define hot spots where they can place medical and rescue teams and install points with water supplies, etc.     

An analysis of naturally occurring radionuclides and <Superscript>137</Superscript>Cs in the soils of urban areas using gamma-ray spectrometry

This study of environmental radioactivity was carried out in the soils of an urban area. Naturally occurring gamma-emitting radionuclides and man-made ¹³⁷Cs were found in the soil profiles collected from four parks in the central Belgrade city area and the soil layer was examined every 10 cm and to a depth of 50 cm. Radioisotope activity concentrations (Bq kg^?1) in the samples of urban soil using the gamma-ray spectrometry method were in the range of 14–46 for ²³⁸U, 33–50 for ²²⁶Ra, 29–63 for ²¹⁰Pb, 1.2–3.4 for ²³⁵U, 28–50 for ²³²Th, 424–576 for ⁴⁰K and 0.7–35.8 for ¹³⁷Cs. Some of the basic physicochemical soil properties (pH, organic matter content, calcium-carbonate content, particle size distribution) were determined to investigate the impact on the vertical distribution of radionuclides. The results of this investigation showed that variations of activity concentration ratios of radionuclides that belong to the same (²³⁸U/²²⁶Ra) or different radioactive series (²³²Th/²²⁶Ra; ²³⁵U/²³⁸U), including ²¹⁰Pb/¹³⁷Cs ratios could well be explained by the properties of the soil. Alkaline pH reaction, the accumulation of organic matter in the uppermost and of carbonates in the deepest layers of urban soil had an effect on ²³⁸U/²²⁶Ra, and ²¹⁰Pb/¹³⁷Cs activity concentration ratio values, while ²³²Th/²²⁶Ra and partially ²³⁵U/²³⁸U ratios were associated with the particle sizes vertical distribution. A study of radionuclides in the samples of leaves of two deciduous tree species common for these parks was also conducted and ²¹⁰Pb and ⁴⁰K were found concentrated in leaves rather than other investigated radionuclides.     

Loop Quantum Cosmology and Probability of Inflation

We study the measure on the set of initial conditions in remote past for Loop Quantum Cosmology with massive scalar field motivated by various choices of the measure present in the literature. The main finding of the paper is existence of an attractor at contracting phase of the universe, which, in addition to the well known attractor at expanding phase, predicts a very specific duration of inflationary stage with the number of e-foldings about 140.     

Crust‐scale 3D model of the Western Bredasdorp Basin (Southern South Africa): data‐based insights from combined isostatic and 3D gravity modelling

The southern South African continental margin documents a complex margin system that has undergone both continental rifting and transform processes in a manner that its present‐day architecture and geodynamic evolution can only be better understood through the application of a multidisciplinary and multi‐scale geo‐modelling procedure. In this study, we focus on the proximal section of the larger Bredasdorp sub‐basin (the westernmost of the five southern South African offshore Mesozoic sub‐basins), which is hereto referred as the Western Bredasdorp Basin. Integration of 1200 km of 2D seismic‐reflection profiles, well‐logs and cores yields a consistent 3D structural model of the Upper Jurassic‐Cenozoic sedimentary megasequence comprising six stratigraphic layers that represent the syn‐rift to post‐rift successions with geometric information and lithology‐depth‐dependent properties (porosities and densities). We subsequently applied a combined approach based on Airy's isostatic concept and 3D gravity modelling to predict the depth to the crust‐mantle boundary (Moho) as well as the density structure of the deep crust. The best‐fit 3D model with the measured gravity field is only achievable by considering a heterogeneous deep crustal domain, consisting of an uppermost less dense prerift meta‐sedimentary layer [ρ = 2600 kg m^?3] with a series of structural domains. To reproduce the observed density variations for the Upper Cenomanian–Cenozoic sequence, our model predicts a cumulative eroded thickness of ca. 800–1200 m of Tertiary sediments, which may be related to the Late Miocene margin uplift. Analyses of the key features of the first crust‐scale 3D model of the basin, ranging from thickness distribution pattern, Moho shallowing trend, sub‐crustal thinning to shallow and deep crustal extensional regimes, suggest that basin initiation is typical of a mantle involvement deep‐seated pull‐apart setting that is associated with the development of the Agulhas‐Falkland dextral shear zone, and that the system is not in isostatic equilibrium at present day due to a mass excess in the eastern domain of the basin that may be linked to a compensating rise of the asthenospheric mantle during crustal extension. Further corroborating the strike‐slip setting is the variations of sedimentation rates through time. The estimated syn‐rift sedimentation rates are three to four times higher than the post‐rift sedimentation, thereby indicating that a rather fast and short‐lived subsidence during the syn‐rift phase is succeeded by a significantly poor passive margin development in the post‐rift phase. Moreover, the derived lithospheric stretching factors [β = 1.5–1.75] for the main basin axis do not conform to the weak post‐rift subsidence. This therefore suggests that a differential thinning of the crust and the mantle‐lithosphere typical for strike‐slip basins, rather than the classical uniform stretching model, may be applicable to the Western Bredasdorp Basin.     

New Archaeomagnetic Data from Tunisia: Dating of Two Kilns and New Archaeointensities from Three Ceramic Artifacts

Two isolated kilns of unknown age and three well‐dated artifacts from Tunisia have been investigated using archaeomagnetic techniques. Dating has been attempted for the kilns and archaeomagnetic intensities have been obtained for the artifacts. The kilns lack datable artifacts although one of them (Sidi Zahruni) could be related to a nearby late Roman site. Comparison with the SCHA.DIF.3K regional geomagnetic model suggests for both kilns two possible periods of last use, either Roman or Medieval. Three archaeomagnetic intensities were obtained for the well‐dated ceramic artifacts adding to scarce archaeomagnetic data from Africa. The new data along with recently published archaeointensities from other Tunisian sites have been compared with the regional model SCHA.DIF.3K, its updated version, and the global ARCH3k.1 geomagnetic model. The models show relatively good agreement with the new archaeointensities and with previously published intensities. The uncertainty of the experimental data tends to increase for older artifacts, and their agreement with the geomagnetic models diminishes. The observed trend of the intensity models to underestimate values in the Tunisian area for the Roman period could be overcome by adding new data from well‐dated artifacts from North African, particularly from pre‐Roman and Roman sites.     

Geochemical and stable isotopic variability within two rivers rising under the same mountain,but belonging to two distant watersheds

Complementary geochemical and stable isotope investigations of the Gorski Kotar karst aquifer system in western Croatia were obtained for the first time, to answer the question whether both studied rivers drain the same aquifer system or not. The two main rivers, the Kupa and the Rje?ina, rise under the same mountain range, but belong to two different watersheds (Black Sea and Adriatic Sea). The karst aquifer of Gorski Kotar is a potentially important source of drinking water for two neighboring countries, Croatia and Slovenia (Central and South Europe), and is strongly influenced by both Mediterranean and continental weather conditions. It is a part of the Dinaric karst, which is “locus typicus” for karst worldwide and one of the most typical karst areas in the world.     

Re–Os geochemistry and geochronology of the Ransko gabbro–peridotite massif, Bohemian Massif

The Ransko gabbro–peridotite massif in Eastern Bohemia is a strongly differentiated intrusive complex, which hosts low-grade Ni–Cu ores mainly developed close to the contact of olivine-rich rocks with gabbros, in troctolites, and to a much lesser extent in both pyroxene and olivine gabbros and plagioclase-rich peridotites. Gabbro, troctolite, peridotite and Ni–Cu ores from the Jezírka Ni–Cu (PGE) deposit, considered to be a typical example of the liquid segregation style of mineralization, were analyzed for Re–Os concentrations and isotopic ratios. Seven barren and mineralized samples from the Jezírka deposit yielded a Re–Os regression of 341.5?±?7.9 Ma (MSWD?=?69). Strongly mineralized peridotite with mantle-like initial ¹⁸⁷Os/¹⁸⁸Os ratio of 0.125 suggests that Os as well as other PGE present in the Ni–Cu mineralization are predominantly of mantle origin. On the other hand, barren and low-mineralized samples have radiogenic initial ¹⁸⁷Os/¹⁸⁸Os ratios of 0.14–0.16 suggesting some import of Re and/or radiogenic ¹⁸⁷Os most likely through contamination by continental crust during magma emplacement. The Re–Os age of the Ransko Massif is significantly younger than the previously suggested Lower Cambrian age, but it is similar to and/or younger than the age of metamorphism of the adjacent Kutná Hora crystalline complex and the Moldanubian unit. Therefore, it is likely that the emplacement of the Ransko massif and its Ni–Cu mineralization was closely connected with the late-stage evolution of the Kutná Hora crystalline complex.     

The unique environment of the most acidified permanently meromictic lake in the Czech Republic

Changes in the water properties and biological characteristics of the highly acidic Hromnice Lake (Western Bohemia) were investigated. This 110-year-old lake, formed as a consequence of the mining of pyritic shales, is permanently meromictic. Two chemoclines separate an extremely acidic (pH ～ 2.6) mixolimnion from a metal-rich anoxic monimolimnion. The absence of spring mixolimnetic turnover due to ice melting and very slow heat propagation through the chemocline with a 6-month delay were observed. Extreme mixolimnetic oxygen maxima (up to 31 mg l^?1) in phosphorus-rich lake (PO₄^3? up to 1.6 mg l^?1) well correlated with outbursts of phytoplankton. Phytoplankton consist of several acido-tolerant species of the genera Coccomyxa, Lepocinclis, Chlamydomonas and Chromulina. Surface phytoplankton biomass expressed as chlorophyll-a varies from 2 to 140 μg l^?1. Multicellular zooplankton are almost absent with the exception of Cephalodella acidophila, a small rotifer occurring in low numbers. Large red larvae of the midge Chironomus gr. plumosus were found at the bottom close to the shore, with larvulae in the open water. Developmental stages (protonemata) of a moss, resembling filamentous algae, dwell in the otherwise plant-free littoral zone.     

Constraining genesis and geotectonic setting of metavolcanic complexes: a multidisciplinary study of the Devonian Vrbno Group (Hrubý Jeseník Mts., Czech Republic)

The low-grade metavolcanic/volcanosedimentary complex of the Devonian Vrbno Group (Silesicum, NE Bohemian Massif, Czech Republic) occurs in two ~NE–SW trending belts, separated by tectonic slices of Cadomian metagranitic paraautochton. (1) The basic–intermediate lavas of the calc-alkaline Western Volcanic Belt came from a moderately depleted mantle $ \left( {\varepsilon_{\text{Nd}}^{370} \sim + 3} \right) $ . Rare rhyolites (374.0 ± 1.7 Ma: 2σ, LA–ICP–MS U–Pb Zrn) were derived most likely from immature crust or by extensive fractionation of primary basaltic melts. The rock association is interpreted as a vestige of a deeply dissected continental arc. (2) The Eastern Volcanic Belt consists mainly of (nearly) contemporaneous (371.0 ± 1.4 Ma) felsic alkaline lavas with high HFSE contents, as well as high Ga/Al and Fe/Mg ratios, typical of within-plate igneous setting. The petrology and Nd–Sr isotopic data point to a high-T anatexis of a young metagranitic crust, resembling the Cadomian (Brunovistulian) basement, in a back-arc setting. The attenuated Brunovistulian lithosphere could have partially melted by the heat provided by the upwelling asthenosphere and/or underplating basic magma. (3) Finally, the region was penetrated by numerous subalkaline, MORB/EMORB-like dolerite sheets—a hallmark of the considerable crustal thinning.     

A New Method for Low‐Temperature Decomposition of Chromites and Dichromium Trioxide using Bromic Acid Evaluated by Chromium Isotope Measurements

In recent years, routine application of the stable isotope determination of chromium (Cr) in environmental and health protection research has led to the search for simpler chromite decomposition techniques. As the range of Cr isotope abundance ratios in nature is very narrow, conventional chromite decomposition techniques are no longer suitable, due to the relatively high risk of contamination during laboratory procedures. We have developed a protocol for the decomposition of chromites based on oxidation by bromic acid at room temperature. The procedure takes 15 d and requires two doses of bromic acid during the reaction period (day 1 and 8), due to the limited stability of the reagent. Chromium extracted by alkaline oxidative fusion and by bromic acid decomposition yielded statistically indistinguishable δ⁵³Cr values, measured by multi‐collector inductively coupled plasma‐mass spectrometry following addition of a ⁵⁰Cr‐⁵⁴Cr double‐spike.