Some thermodynamical and microphysical aspects of monsoon clouds

The thermodynamical and microphysical characteristics of monsoon clouds in the Poona, Bombay and Rihand regions were investigated using extensive aircraft in-cloud observations. The number of clouds sampled at Poona, Bombay and Rihand is 2199, 169 and 104 respectively. The temperatures inside the cloud are colder than its environment at Poona and Rihand. The maximum difference is about 3°C at the cloud base level and the difference decreased with height. At Bombay the difference is less than 1°C and at some levels the temperatures inside the cloud are warmer than its environment. The lapse rates of temperatures inside the cloud are slightly less than those in the immediate environment of the cloud. The environmental lapse rates are nearly equal to the saturated adiabatic value. The positive increments in liquid water content (LWC) are associated with the increments in temperature inside the cloud. Similarly positive increments in temperatures inside the cloud are associated with the increments in temperature of its immediate environment at the same level or the layer immediately above. The maximum cloud lengths observed at Poona and Bombay respectively are 14 and 3 km. The horizontal cross-section of LWC showed a maximum number of 13 peaks in clouds at Poona while only 7 peaks were observed at Bombay. The location of maximum LWC in the horizontal cross-section is more or less at the centre of the cloud. The LWC profile showed an increase with height from the base of the cloud at Poona and Bombay. There is no marked variation of LWC with height at Rihand. The total droplet concentration at different altitudes at Poona and Bombay is in the range 28–82 cm^?3. The size distribution of cloud droplets experienced a broadening effect with increase in height from the cloud base at Poona. The broadening effect at Bombay is not as marked as that at Poona.     

Comparative discharges of fresh and waste water along the California coast

As the population of California grows, the discharge of domestic and industrial waste water and power-plant cooling water into coastal waters continuously increases. About 0.75 × 10⁶ m³ of industrial waste water, 3.75 × 10⁶ m³ of domestic waste water, and 26.5 × 10⁶ m³ of thermal effluent are discharged daily into California's nearshore waters. These waters do not have an infinite capacity to break down and disperse the pollutants. Waste water discharged near shore may remain there for considerable time and have a significant effect on water quality and marine life. The low population and wet climate of the northern coastal region have led to small discharges of waste water but very large inputs of fresh water to the ocean. Southward along the Pacific Coast the climate becomes more arid, and population increases. This combination leads to a large excess of waste-water over fresh-water discharge. Many individual waste-water discharges exceed the average daily discharge of most of the rivers which enter the coastal waters.     

Die Bedeutung der Versumpfung für die Entstehung von Hochmooren in Deutschland

Zusammenfassung Es ist nur bei Gebirgsmooren zulässig, von Versumpfungsmooren zu reden. Die als solche erscheinenden Hochmoore des Flachlandes dürften in der Mehrzahl der Fälle keine Versumpfungsmoore im engeren Sinne sein, sondern nur durch Versumpfugserscheinungen in ihrer Ausbreitung geförderte Hochmoore, die ursprünglich als Hochmoore auf eutrophen und mesotrophen Moorschichten begannen (sogen. kombinierte Profile).Das Vorhandensein von Hochmooren des Flachlandes, die wirklich durch Versumpfung ins Leben gerufen worden sind, ist erst noch zu beweisen.     

Modelling the sustainability and productivity of pastoral systems in the communal areas of Namaqualand

We investigated the effects of rainfall and the number of animals on changes in vegetation and on the output of milk and meat from the communal areas of Namaqualand. Previously published short- and long-term models link processes that range from the levels of tissue (in, for example, the mammary gland), to the milk yields of individual animals, to the growth and survival of their young and to long-term changes in plant species populations at the ecosystem level. These models have been used to study how different factors and management strategies affect livestock productivity and vegetation composition on a 20,000 ha rangeland in Namaqualand. First, the inter-relations between rainfall, stocking rate and productivity were studied using the short-term model. This model shows that in addition to total rainfall and stocking rate, the timing of rainfall within a year also influences doe live weight and survival to the end of the year. When the long-term model is run, using recorded rainfall, predictions of small stock numbers agree closely with livestock data recorded over the same 30-year period. One thousand replicates of 100-year runs of the long-term model were then used to study the probable impact of different upper limits to stock numbers on animal performance. Off take (sales and slaughterings) are maximal when stock numbers are limited to 2000 adults. Animal numbers increase marginally as the limit is increased above this level, but the variability between years in numbers increases. Secondly, the long-term model was used to study the long-term effects of the stocking rate strategies on rangeland condition. The model predicts that although these effects are variable, when moderately degraded range is stocked with an upper limit at the recommended level it is unable to recover to less degraded states over 100 years. Thirdly, the model was used to examine the effects of reduction in stock numbers and slaughtering of kids in a drought year on goat numbers during the subsequent 5 years. Finally, the model predicts that a 10% reduction in mean annual rainfall will lead to a 35% reduction in animal numbers over 200 years.     

Sm–Nd and Sr isotope systematics of scheelite from the giant Au(–W) deposit Muruntau (Uzbekistan): implications for the age and sources of Au mineralization

The application of the Sm-Nd isotope system of scheelite to dating of low-sulfide, quartz-vein hosted Au mineralization is still under discussion. In the present work, new Sm-Nd and Rb-Sr data for scheelite from the giant Muruntau/Myutenbai Au deposit (Kyzylkum, Western Uzbekistan) are discussed. Based on the geological relationship, mineralogical properties, and trace element characteristics, two types of scheelite can be distinguished within the deposit. The first one is represented by early bluish luminescent and weakly coloured scheelite (generation 1) found within strongly deformed flat quartz veins. The apparent isochron defined by this scheelite (351ᆪ Ma) is interpreted as a mixing line. Typically brownish to orange and yellowish luminescent scheelite from steeply dipping veins (generation 2) defines a Sm-Nd isochron age of 279ᆦ Ma ()_Nd=-9.5ǂ.3; MSWD: 1.5). No evidence for mixing or disturbance by late alteration were found for these scheelites. This Sm-Nd isochron age agrees with the Rb-Sr and K-Ar age range for wall rock alteration in this deposit reported previously. The age of 280 Ma is interpreted to date the high-grade ore formation in the Muruntau deposit. There are currently no reliable age data available on the magmatic events in the Muruntau region. Probably, there is some overlap in time of the Hercynian gold deposition with the intrusion of lamprophyric dykes. The Nd and Sr isotopic signatures of scheelite define the wall rocks (mainly metasiltstones and metasandstones) as the most probable sources for these elements in scheelite.     

Magnetic susceptibility anisotropy measurements of coal from the South Wales coal field: a coalification process indicator

Summary. Anisotropy of magnetic susceptibility measurements have been performed on 154 specimens taken from 25 different seams in the South Wales Coal Field, up to 24 samples per seam. The magnetic fabric determined is represented, in general, by oblate spheroids with minimum ( K _c) AMS axes usually clustered at a near-vertical, or occasionally, near-horizontal pole which is normal to the magnetic foliation plane defined by great circle distributions of maximum ( K _a) and intermediate ( K _b) axes. The results suggest that the coalification process and variations in rank within the coal field are due to the combined effects of vertical compression and compaction resulting from variations in overburden pressure, and to horizontal compression, due to variations in tectonic thrusting during the Variscan Orogeny. Analysis of the AMS of closely spaced samples across a single anthracite seam shows no systematic variability in magnetic properties within the seam.     

A Challenging Solar Eruptive Event of 18 November 2003 and the Causes of the 20 November Geomagnetic Superstorm. III. Catastrophe of the Eruptive Filament at a Magnetic Null Point and Formation of an Opposite-Handedness CME

Our analysis in Papers I and II (Grechnev et al., Solar Phys. 289, 289, 2014b and Solar Phys. 289, 1279, 2014c) of the 18 November 2003 solar event responsible for the 20 November geomagnetic superstorm has revealed a complex chain of eruptions. In particular, the eruptive filament encountered a topological discontinuity located near the solar disk center at a height of about 100 Mm, bifurcated, and transformed into a large cloud, which did not leave the Sun. Concurrently, an additional CME presumably erupted close to the bifurcation region. The conjectures about the responsibility of this compact CME for the superstorm and its disconnection from the Sun are confirmed in Paper IV (Grechnev et al., Solar Phys. submitted, 2014a), which concludes about its probable spheromak-like structure. The present article confirms the presence of a magnetic null point near the bifurcation region and addresses the origin of the magnetic helicity of the interplanetary magnetic clouds and their connection to the Sun. We find that the orientation of a magnetic dipole constituted by dimmed regions with the opposite magnetic polarities away from the parent active region corresponded to the direction of the axial field in the magnetic cloud, while the pre-eruptive filament mismatched it. To combine all of the listed findings, we propose an intrinsically three-dimensional scheme, in which a spheromak-like eruption originates via the interaction of the initially unconnected magnetic fluxes of the eruptive filament and pre-existing ones in the corona. Through a chain of magnetic reconnections their positive mutual helicity was transformed into the self-helicity of the spheromak-like magnetic cloud.     

Density models for the upper atmosphere

Modeling the effects of atmospheric drag is one of the more important problems associated with the determination of the orbit of a near-earth satellite. Errors in the drag model can lead to significant errors in the determination and prediction of the satellite motion. The uncertainty in the drag acceleration can be attributed to three separate effects: (a) errors in the atmospheric density model, (b) errors in the ballistic coefficient, and (c) errors in the satellite relative velocity. In a number of contemporary satellite missions, the requirements for performing the orbit determination and predictions in near real-time has placed an emphasis on density model computation time as well as the model accuracy. In this investigation, a comparison is made of three contemporary atmospheric density models which are candidates for meeting the current orbit computation requirements. The models considered are the analytic Jacchia-Roberts model, the modified Harris-Priester model, and the USSR Cosmos satellite derived density model. The computational characteristics of each of the models are compared and a modification to the modified Harris-Priester model is proposed which improves its ability to represent the diurnal variation in the atmospheric density.This investigation was supported by the NASA Goddard Spaceflight Center under contract NAS5-20946 and Contract NSG 5154.     

A renaissance in studies of ancient life

In the Origin of Species, published a century‐and‐a‐half ago, Darwin was mystified by the lack of a ‘pre‐Cambrian’ fossil record, the existence of which he regarded as pivotal to his theory of evolution. For the next 100 years, this ‘missing’ fossil record—unknown and thought unknowable'stood out as arguably the single greatest blemish to Darwin's theory. Beginning in the 1950s, the answer to Darwin's problem began to be unearthed, a Precambrian record of flourishing communities of microscopic organisms now known to extend to 3500 million years ago. During recent years, studies of such ancient microbes have markedly increased, spurred by an influx of new workers and, especially, by the introduction of new analytical techniques, three of which are featured here: confocal laser scanning microscopy, and Raman‐spectral and fluorescence‐spectral imagery. Used together, these techniques provide evidence of the three‐dimensional form, cellular anatomy, and molecular structure of rock‐embedded microscopic fossils and of the minerals in which they are entombed that is unavailable by any other means.     

Thick sections of layered ultramafic cumulates in the Oman ophiolite revealed by an airborne hyperspectral survey: Petrogenesis and relationship to mantle diapirism

Using the HyMap instrument, we have acquired visible and near infrared hyperspectral data over the Maqsad area of the Oman ophiolite (~ 15 × 60 km). This survey allowed us to identify and map the distribution of clinopyroxene-rich cumulates (inter-layered clinopyroxenites and wehrlites) whose occurrence was previously undocumented in this area. The cumulates reach several hundred meters in thickness and crop out at distances exceeding 15 km on both sides of the Maqsad former spreading centre. They occur either in mantle harzburgites, as km-sized layered intrusions surrounded by fields of pegmatitic dykes consisting of orthopyroxene-rich pyroxenite and gabbronorites, or at the base of the crustal section where they are conformably overlain by cumulate gabbros. These ultramafic cumulates crystallized from silica- and Mg-rich melts derived from a refractory mantle source (e.g. high Cr#, low [Al₂O₃], low [TiO₂]). These melts are close to high-Ca boninites, although, strictly speaking, not perfect equivalents of present-day, supra-subduction zone, boninites. Chemical stratigraphy reveals cycles of replenishment, mixing and fractional crystallization from primitive (high Mg#) melts, typical of open magma chambers and migration of inter-cumulus melts. The TiO₂ content of clinopyroxene is always low (≤ 0.2 wt.%) but quite variable compared to the associated pegmatites that are all derived from a source ultra-depleted in high field strength elements (HFSE). This variability is not caused by fractional crystallization alone, and is best explained by hybridization between the ultra-depleted melts (parent melts of the pegmatites) and the less depleted mid-ocean ridge basalts (MORB) parent of the dunitic–troctolitic–gabbroic cumulates making up the crustal section above the Maqsad diapir.We propose that, following a period of magma-starved spreading, the Maqsad mantle diapir, impregnated with tholeiitic melts of MORB affinity, reached shallow depths beneath the ocean ridge. This diapir induced melting of the formerly accreted and hydrothermally altered lithosphere. At this stage, these boninitic-like lithospheric melts crystallized as pegmatitic dykes. As the diapir continued to rise, the amount of MORB reaching shallow depths increased, together with the surrounding temperature, leading to the formation of magma chambers where the crystallization of layered cumulates became possible. These cumulates remained rich in pyroxene and devoid of plagioclase as long as the contribution of MORB-derived melts was moderate relative to the lithospheric-derived melts. As the contribution of MORB to the refilling of the magma chamber increased, gabbroic cumulates started to crystallize.