Simulation Assessment of Direct Push Injection Logging for High-Resolution Aquifer Characterization

Direct push injection logging (DPIL) has become one of the most widely used approaches for obtaining vertical profiles of hydraulic conductivity (K) in environmental site investigations. Despite its widespread use, however, there has been no rigorous analysis of the underlying physical processes that take place during DPIL or how the approach would perform under different hydrogeological and operating conditions. We address these issues through a series of numerical simulations. Results show that the ratio of DPIL injection rate over pressure can be used for direct determination of K when K is >10⁻⁶ m/s. When K is <10⁻⁶ m/s and specific storage (Ss) is >10⁻³/m, the ratio becomes increasingly sensitive to Ss; in that case, additional information on Ss is needed for reliable K estimation. For unconsolidated formations of moderate K or higher, the ratio of injection rate over pressure should provide a reasonable K estimate when Ss is <10⁻³/m. Although water injection at previous depths during continuous DPIL has only a small impact on the pressure response measured at the current injection depth, probe advancement can have a significant impact when K and Ss are small. Consequently, in fine-grained materials, the advancement-generated pore water pressure increase can comprise a large portion of the measured pressure response. To diminish the impact of probe advancement in such materials, advancement speed should be kept as low as possible (e.g., 0.5 cm/s).     

How fast does tufa grow? Very high-resolution measurement of the tufa growth rate on artificial substrates by the development of a contactless image-based modelling device

Accurate determination of the tufa growth rate (TGR) is required to answer the fundamental geomorphological question of tufa evolution. The TGR has been measured by various direct and indirect methods. One of the most popular direct methods uses modified micro-erosion meter (MEM), which has several drawbacks. Here, we present for the first time a coordinate measuring macro-photogrammetry device (CMD) for monitoring the TGR in a contactless manner. The CMD was applied on 28 limestone plates at 14 locations within the Skradinski buk area, Croatia, and measurements were performed in the laboratory. The TGR was derived from digital tufa high-resolution models (DTHRMs). The accuracy of the device was evaluated using state-of-the-art three-dimensional (3D) scanners and error calculation at checkpoints. Moreover, the precision was evaluated with the split test (n = 5). A total of 74 DTHRMs with a spatial resolution of 0.0236 mm were created. The TGR ranged from 0.327 to 19.302 mm a⁻¹, with an average of 5.771 mm a⁻¹. A higher TGR was observed on the limestone plates near mosses, located in fast and turbulent water rather than in stagnant water. We found that specific micro-environmental factors (e.g. proximity to moss) positively affected tufa growth. Erosion events were observed, as well as the presence of aquatic insect larvae (Simuliidae and Chironomidae), which positively affected tufa growth. The CMD is a precise and accurate device that does not suffer from the drawbacks of the MEM method and has many other advantages. It has a high capability of tufa erosion detection, enables the identification of macroinvertebrates, and multispectral or hyperspectral cameras can be mounted on the device for spectral reflectance analysis of the tufa surface. The CMD can be applied in any study requiring a sub-millimetre data quality and involving the comparison of consecutive 3D models and derivation of various parameters of smaller objects. © 2020 John Wiley & Sons, Ltd.     

Spatial and temporal variation of picoplanktic cyanobacteria population in a density stratified estuary,and the introduction of a cellular gradient number

Spatial and temporal variations in the distribution of the marine picoplanktic cyanobacteria population and mixing conditions were found in the Ebro River estuary outflow to the Mediterranean Sea in Spain. Six sampling surveys were undertaken between July 1999 and February 2000 for distances up to 15 km from the river mouth. Measurements were taken of flow velocity, salinity, temperature, depth and picocyanobacteria (PCB) abundances. Gradient Richardson (Rig) and Reynolds (Re) numbers were determined to evaluate hydrodynamics. In summer, large values of Rig arise from the small flow rates, and small values of velocity shear between the surface fresh water layer and the bottom saline layer; conversely, in winter the large flow rates and attendant large velocity shears between the layers give rise to small values of Rig. Flow conditions in the fall are an intermediate case between the summer and winter cases. Vertical abundance distributions were resolved through the river water, interfacial region, and the bottom salt wedge; longitudinal gradients of PCB abundances were also resolved. Seasonal differences in the PCB abundance values were observed. Analysis of cell numbers (C) showed that the variable dC/dS, the dependence of cell number upon salinity gradient (dS) was critical. A non-dimensional number; the cellular gradient number (Cg) is introduced. Cg has useful biological interpretations that can potentially be included in ecological modeling. For example, Cg = 1 pertains to perfect adaptability of the organism to adjust to changing environmental conditions, whereas Cg = 0 describes total mortality. For a system with strong advection there is insufficient time for cells to adapt to the changing environment, and so those cell counts are unchanged. This is the case for the Ebro estuary in winter as advection of salinity (and hence PCB abundance) dominates the other loss processes for large flow rates.     

Acceleration Phase of Coronal Mass Ejections: II. Synchronization of the Energy Release in the Associated Flare

We analyze the relationship between the acceleration of coronal mass ejections (CMEs) and the energy release in associated flares, employing a sample of 22 events in which the CME kinematics were measured from the pre-eruption stage up to the post-acceleration phase. The data show a distinct correlation between the duration of the acceleration phase and the duration of the associated soft X-ray (SXR) burst rise, whereas the CME peak acceleration and velocity are related to the SXR peak flux. In the majority of events the acceleration started earlier than the SXR burst, and it is usually prolonged after the SXR burst maximum. In about one half of the events the acceleration phase is very closely synchronized with the fastest growth of the SXR burst. An additional one quarter of the events may be still considered as relatively well-synchronized, whereas in the remaining quarter of the events there is a considerable mismatch. The results are interpreted in terms of the feedback relationship between the CME dynamics and the reconnection process in the wake of the CME.     

Isotope geochemistry of drainage from an acid mine impaired watershed,Oakland, California

Oxidation of sulfides at the Leona Heights Sulfur Mine has resulted in the liberation of acid, SO₄ and metals to Leona Creek. Previous research at the site has indicated Fe(II) oxidation at rates faster than would be predicted by abiotic oxidation alone, particularly in the segment of stream between the Adit and Leona Street sample stations. In order to assess the mechanisms responsible for sulfide oxidation, samples were collected for isotopic analysis of water and SO₄, the results of which were used to develop a stoichiometric isotope-balance model. This exercise indicated that the percentage of water-derived oxygen in SO₄ increased spatially from between 56% and 64% at the Adit to between 71% and 72% at Leona Street, illustrating that increased sulfide oxidation via Fe(III) was occurring within, or as water flows over, the waste rock, relative to water emanating directly from the former mine. The incorporation of water-derived oxygen in SO₄ during pyrite oxidation is a process controlled by Fe oxidizing bacteria such as A. ferrooxidans at low pH. The role of bacteria was further supported by estimates of the rate constant for Fe oxidation between sampling stations, yielding values that were approximately 10⁶ faster than abiotic Fe oxidation alone. Stable isotopic analysis of water further indicates a close correlation of adit spring water to the local meteoric water line, while ³H data indicate a groundwater apparent age, or time of travel from its primary zone of recharge, of <5–18 a. Additionally, the δ³⁴S data, in conjunction with reported albitized feldspars within the Leona Rhyolite host rock, indicate a magmatic origin of ore sulfur, contrary to previous interpretations at the site.     

Global Health Studies Based on Local Realities

A major new programme launched by the US Bureau of Educational and Cultural Affairs and the Council forInternational Exchange of Scholars will examine the "Challenges of Health in a Borderless World". The Fulbright New Century Scholars (NCS)Program is intended to build on the strengths of the traditional Fulbright ScholarProgram, which sponsors individual researchers to spend some time working in a country other than their own. The new programme aims to extend the idea of individual exchange, to provide a forum for international, interdiscipli-nary collaboration among groups of researchers.In choosing health as the subject for the first such collaboration, the Program recognises the key significance of the topic to developed and developing countries alike, as well as theneed for a coordinated global response to many of the health problems facing the world today.     

Search for neutrino decay during the 1999 solar eclipse

The solar neutrino problem could arise from oscillation of one neutrinotype into a secondtype. Neutrinos would have a mass and there could be the possibility ofradiative neutrino decays. We discuss the search for neutrino decaysduring the 1999 solar eclipse: it involves the emitted visible photons,while neutrinos travel from the Moon to the Earth. The concept and themain characteristics of the NOTTE experiment are presented.     

Changes over time in near-saturated hydraulic conductivity of peat soil following reclamation for agriculture

Reclamation of peat bogs for agriculture changes the physical and chemical characteristics of the peat matrix, for example, drainage and tillage accelerate decomposition, altering peat porosity, pore size distribution, and hydraulic properties. This study investigated changes in near-saturated hydraulic conductivity over time after drainage of peat soil for agricultural use by conducting tension infiltrometer measurements in a mire that has been gradually drained and reclaimed for agriculture during the past 80 years (with fields drained 2, 12, 40, and 80 years before the measurements). At pore water pressure closest to saturation (pressure head −1 cm), hydraulic conductivity in the newest field was approximately nine times larger than that in the oldest field, and a decreasing trend with field age was observed. A similar (but weaker) trend was observed with −3 cm pressure head (approximately four times larger in the newest field in comparison to the oldest), but at −6 cm head, there were no significant differences. These results indicate that peat degradation reduces the amount of millimetre-sized pores in particular. They also indicate that changes in peat macroporosity continue for several decades before a new steady state is reached.