Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.     

Stars in stone: the Annenberg Courtyard fountains

The transformation of the courtyard at Burlington House involves more than just new paving. Margaret Penston explains the astronomical theme that underpins the design and layout of the fountains and lighting.     

Composition of hydrous melts in equilibrium with quartz eclogites

Summary Compositions of the hydrous melts in equilibrium with garnet, omphacitic clinopyroxene and quartz have been investigated experimentally at 28.5 and 35 kbar. They are represented by silica-rich liquids (> 70% SiO₂) with low MgO, FeO and CaO contents. The removal of ca 10–15% of the magma of this composition may be sufficient to convert quartz eclogite formed after subduction of altered MORB into a quartz-free bimineralic eclogite assemblage, which is a common type of xenoliths in kimberlites.At 28.5 kbar the solidus temperature is between 700 and 750° C in the system quartz eclogite—water, and the high pressure amphibole-out boundary lies at ca 25 kbar in accord with the previous studies.

---

Die Zusammensetzung wasserhältiger Schmelzen im Gleichgewicht mit Quarz-Eklogiten

Zusammenfassung Um Prozesse zu simulieren, die bei der Subduktion von Ozeanbodenbasalten durch partielle Anatexis im Stabilitätsfeld von Eklogiten ablaufen, wurde die Zusammensetzung wasserhältiger Schmelzen in Gleichgewicht mit Granat, Omphacit und Quarz bei 28.5 und 35 Kbar experimentell untersucht. Diese Schmelzen sind reich an SiO₂ (> 70 Gew%) und arm an Mg0, Fe0 and CaO. Die Extraktion von ca. 10–15% derartiger Schmelzen würde genügen, um quarzführende Eklogite, die durch die Subduktion von alteriertem MORB Material entstanden sind, in quarzfreie bimineralische Eklogite umzuwandeln wie sie häufig als Xenolithe in Kimberliten beobachtet werden.Im System Quarz-Eklogit-Wasser liegt die Solidustemperatur bei 28.5 Kbar zwischen 700 und 750°C. Die obere Stabilitätsgrenze von Amphibol liegt in diesem Temperaturbereich bei ca. 25 Kbar.

---

---

With 1 Figures     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

Quaternary evolution of Cedar Creek alluvial fan, montana

Cedar Creek alluvial fan is a textbook example of an alluvial fan because of its fan shape with smooth, concentric contours and excellent symmetry. Similar planimetric shapes have been used to infer uniform fan deposition; however, Cedar Creek alluvial fan is composed of four fan deposits of Quaternary age, Qf1 (oldest) to Qf4 (youngest), indicating that fan deposition was nonuniform in both time and space. Field studies indicate that deposition of Cedar Creek alluvial fan is related to glaciofluvial outwash activity during the Pleistocene and upper-fan entrenchment and lower-fan deposition during the Holocene.Qf1 and Qf2 deposits are sub-horizontally bedded, clast-supported sandy gravels uniformly imbricated upfan. Comparison of soil profiles developed in these deposits to radiogenically-dated chronosequences within the region indicates that Qf1 and Qf2 are correlative with Bull Lake and Pinedale-age deposits, respectively. These relationships are substantiated by physical correlation of Qf1 and Qf2 with Bull Lake and Pinedale moraines, respectively, in the Cedar Creek drainage basin. The sedimentology and timing of Qf1 and Qf2 indicate deposition in high-energy, proglacial, braided streams. Furthermore, the present morphology of Cedar Creek alluvial fan was established largely during aggradation of Qf1 and Qf2 when sediment supply to the fan was sufficient to activate 60% to greater than 90% of the total fan area. During Bull Lake glaciation, the apex of Qf1 deposition formed the apex of Cedar Creek alluvial fan as Qf1 covered more than 90% of the present fan area. During Pinedale glaciation, Qf2 deposition shifted downfan; Qf2 is inset into Qf1 above the intersection point, but below the intersection point it eroded and/or buried Qf1 as it activated as much as 60% of the fan area.Qf3 and Qf4, comprising 21% of the fan area, are inset into Qf2 in the lower fan area. Soil development in Qf3 and Qf4 deposits indicate episodic deposition and entrenchment beginning in early Holocene and continuing to present. A post-glacial decrease in sediment supply to Cedar Creek alluvial fan is indicated by sediment storage within the Cedar Creek drainage basin. Decreased sediment supply to the fan resulted in upper-fan entrenchment of Qf2 and deposition of Qf3 and Qf4 in the lower-fan area.     

Digital preprocessing techniques for GLORIA II sonar images

Image processing techniques are discussed that correct distortions in GLORIA II side scan sonar imagery including water column offset, slant-range distortion, multiple returns, aspect ratio, speckle noise, striping, and cross-track power drop-off. The software operates within NASA's ELAS image processing system and is applied to the original 12-bit GLORIA II data. Procedures are discussed for generating large scale mosaics and three-dimensional overlays with sea floor bathymetry. The results are shown in four sonographs acquired off the southern coast of California.     

Quantitative elemental mapping of granulite-facies monazite: Textural insights and implications for petrochronology

Texturally complex monazite grains contained in two granulite-facies pelitic migmatites from southern Baffin Island, Arctic Canada, were mapped by laser ablation-inductively coupled plasma-mass spectrometry (using spot sizes ≤5 µm) to quantitatively determine the spatial variation in trace element chemistry (with up to 1,883 analyses per grain). The maps highlight the chemical complexity of monazite grains that have experienced multiple episodes of growth, resorption and chemical modification by dissolution–precipitation during high-grade metamorphism. Following detailed chemical characterization of monazite compositional zones, a related U–Pb data set is re-interpreted, allowing petrologically significant ages to be extracted from a continuum of concordant data. Synthesis of these data with pseudosection modelling of prograde and peak conditions allows for the temporal evolution of monazite trace element chemistry to be placed in the context of the evolving P–T conditions and major phase assemblage. This approach enables a critical evaluation of three commonly used petrochronological indicators: linking Y to garnet abundance, the Eu anomaly to feldspar content and Th/U to anatectic processes. Europium anomalies and Th/U behave in a relatively systematic fashion, suggesting that they are reliable petrochronological witnesses. However, Y systematics are variable, both within domains interpreted to have grown in a single event, between grains interpreted to be part of the same age population, and between samples that experienced similar metamorphic conditions and mineral assemblages. These observations caution against generalized petrological interpretations on the basis of Y content, as it suggests Y concentrations in monazite are controlled by domainal equilibria. The results reveal a c. 45 Myr interval between prograde metamorphism and retrograde melt crystallization in the study area, emphasizing the long-lived nature of heat flow in high-grade metamorphic terranes. Such long timescales of metamorphism would be assisted by the growth, retention and dominance of high-Th suprasolidus monazite, as observed in this study, contributing to the radiogenic heating budget of mid- to lower-crustal environments. Careful characterization of monazite grains suggests that continuum-style U–Pb data sets can be decoded to provide insights into the duration of metamorphic processes.