Atmospheric boundary-layer structure observed during a haze event due to forest-fire smoke

During a haze event in Baltimore, U.S.A. from July 6 to 8, 2002, smoke from forest fires in the Québec region (Canada), degraded air quality and impacted upon local climate, decreasing solar radiation and air temperature. The smoke particles in and above the atmospheric boundary layer (ABL) served as a tracer and provided a unique opportunity to investigate the ABL structure, especially entrainment. Elastic backscatter lidar measurements taken during the haze event distinctly reveal the downward sweeps (or wisps) of smoke-laden air from the free atmosphere into the ABL. Visualisations of mechanisms such as dry convection, the entrainment process, detrainment, coherent entrainment structures, and mixing inside the ABL, are presented. Thermals overshooting at the ABL top are shown to create disturbances in the form of gravity waves in the free atmosphere aloft, as evidenced by a corresponding ripple structure at the bottom of the smoke layer. Lidar data, aerosol ground-based measurements and supporting meteorological data are used to link free atmosphere, mixed-layer and ground-level aerosols. During the peak period of the haze event (July 7, 2002), the correlation between time series of elastic backscatter lidar data within the mixed layer and the scattering coefficient from a nephelometer at ground level was found to be high (R=0.96 for z =324 m, and R=0.89 for z=504 m). Ground-level aerosol concentration was at a maximum about 2 h after the smoke layer intersected with the growing ABL, confirming that the wisps do not initially reach the ground.     

Verifying warnings for point precipitation

Short-term risk forecasts of point precipitation are obtained with COTREC/RainCast, a technique for extrapolation of radar images. The risk forecasts are updated every 5 min for the next 0–2 h. Risk levels are defined for moderate, heavy and extreme precipitation. Warning messages are generated if, at the locations of 23 rain gauges, these risk levels are reached or exceeded. The time-resolved gauge data are used to judge if the warning messages are in time, early or late.Data over a period of 4 months (summer 2002) are used for verification. The largest number of warnings (1790) was obtained for moderate precipitation. About 55% of these warnings were in time, 23% were early and 22% were late. This finding is in a good agreement with the defined risk level for warnings (50%), indicating that the model for calculating the risk factors is reliable. Less warnings in time, and more late warnings were found for heavy and extreme precipitation. Hence, the risk levels need to be lowered for heavy and extreme precipitation, in order to reduce the number of late warnings.     

Subgrid-Scale Dynamics of Water Vapour, Heat, and Momentum over a Lake

We examine the dynamics of turbulence subgrid (or sub-filter) scales over a lake surface and the implications for large-eddy simulations (LES) of the atmospheric boundary layer. The analysis is based on measurements obtained during the Lake-Atmosphere Turbulent EXchange (LATEX) field campaign (August–October, 2006) over Lake Geneva, Switzerland. Wind velocity, temperature and humidity profiles were measured at 20 Hz using a vertical array of four sonic anemometers and open-path gas analyzers. The results indicate that the observed subgrid-scale statistics are very similar to those observed over land surfaces, suggesting that the effect of the lake waves on surface-layer turbulence during LATEX is small. The measurements allowed, for the first time, the study of subgrid-scale turbulent transport of water vapour, which is found to be well correlated with the transport of heat, suggesting that the subgrid-scale modelling of the two scalars may be coupled to save computational resources during LES.     

Intra-oceanic settings of the western Mexico Late Jurassic-Early Cretaceous arc sequences. Implications for the Pacific-Tethys geodynamic relationships during the Cretaceous

Abstract

The Guerrero suspect terrane composed of Late Jurassic-Early Cretaceous sequences, extends from Baja California up to Acapulco and is considered to be coeval with the Late Mesozoic igneous and sedimentary arc sequences of the Greater Antilles, Venezuela and Western Cordillera of Colombia. New geological, petrological and geochemical data from central and southern Mexico, led us to propose a new model for the building of the Alisitos-Teloloapan arc. This arc, partly built on the Pacific oceanic lithosphere and partly on continental fragments, could be related to the subduction of an oceanic basin - the Arperos basin - under the Paleo-Pacific plate. This subduction was dipping southwest.

At the beginning of the magmatic activity of the oceanic segment of this arc, depleted tholeiitic basalts were emitted in a submarine environnement below the CCD. While subduction was going on, the arc magmas evolved from LREE depleted tholeiites to slightly LREE enriched tholeiites and then, to calc-alkaline basalts and andesites enriched in LREE and HFSE. Concurrently, the arc sedimentary environment changed from deep oceanic to neritic with the deposition of Aptian-Albian reefal limestones, at the end of the arc building. In the continent-based segment, the arc magmas are exclusively differentiated calc-alkaline suites depleted in HREE and Y, formed of predominantly siliceous lavas and pyroclastic rocks, emitted in a sub-aerial or shallow marine environment.

Thus, taking into account this above mentioned model, the Cretaceous volcanic series, accreted to the margins of cratonal America, in Colombia, Venezuela, Greater Antilles and Mexico, could be related to the same west-south-west dipping subduction of oceanic basins, fringing the North and South American continental cratons and connected directly with the inter-American Tethys. While the subduction was proceeding, this magmatic arc drifted towards the North and South American cratons and finally, collided with the continental margins at different periods during the Cretaceous.     

The end of the Ediacara biota: Extinction,biotic replacement,or Cheshire Cat?

The Ediacaran–Cambrian transition signals a drastic change in both diversity and ecosystem construction. The Ediacara biota (consisting of various metazoan stem lineages in addition to extinct eukaryotic clades) disappears, and is replaced by more familiar Cambrian and Paleozoic metazoan groups. Although metazoans are present in the Ediacaran, their ecological contribution is dwarfed by Ediacaran-type clades of uncertain phylogenetic affinities, while Ediacaran-type morphologies are virtually non-existent in younger assemblages. Three alternative hypotheses have been advanced to explain this dramatic change at, or near, the Ediacaran–Cambrian boundary: 1) mass extinction of most Ediacaran forms; 2) biotic replacement, with early Cambrian organisms eliminating Ediacaran forms; and 3) a Cheshire Cat model, with Ediacaran forms gradually disappearing from the fossil record (but not necessarily going extinct) as a result of the elimination of unique preservational settings, primarily microbial matgrounds, that dominated the Ediacaran. To evaluate these proposed explanations for the biotic changes observed at the Ediacaran–Cambrian transition, environmental drivers leading to global mass extinction are compared to biological factors such as predation and ecosystem engineering. We explore temporal and biogeographic distributions of Ediacaran taxa combined with evaluations of functional guild ranges throughout the Ediacaran. The paucity of temporally-resolved localities with diverse Ediacaran assemblages, combined with difficulties associated with differences in taphonomic regimes before, during, and after the transition hinders this evaluation. Nonetheless, the demonstration of geographic and niche range changes offers a novel means of assessing the downfall of Ediacara-type taxa at the hands of emerging metazoans, which we hypothesize to be most likely due to the indirect ecological impact metazoans had upon the Ediacarans. Ultimately, the combination of studies on ecosystem construction, biostratigraphy, and biogeography showcases the magnitude of the transition at the Ediacaran–Cambrian boundary.     

Fault zone geometry of a mature active normal fault: A potential high permeability channel (Pirgaki fault, Corinth rift, Greece)

We present results from petrophysical analysis of a normal fault zone with the aim of defining the flow pathways and their behavior during seismic and interseismic periods. Data are obtained on porosity geometry, strain structure and mineralogy of different domains of a normal fault zone in the Corinth rift. Data point out a close relationship between mineralogy of the clayey minerals, porosity network and strain structures and allow definition of a macroscopic anisotropy of the flow parameters with a strong control by microscopic ultracataclasite structures. The Pirgaki fault zone, developed within pelagic limestone, has a sharp asymmetric porosity profile, with a high porosity volume in the fault core and in the damage zone of the hanging wall. From porosity volumes and threshold measurements, a matrix permeability variation of 6 orders of magnitude could be expected between the protolith and the fault core. Modifications of this pathway during seismic and interseismic phases are depicted. Healing of cracks formed during seismic slip events occurred in the fault core zone and the porous network in the damage zone is sealed in a second step. The lens geometry of the fault core zone is associated with dissolution surfaces and open conduits where dissolved matter could move out of the fault core zone. These elementary processes are developed in particular along Riedel's structures and depend on the orientation of the strain surfaces relative to the local stress and depend also on the roughness of each surface type. P-surfaces are smooth and control shearing process. R-surfaces are rough and present two wavelengths of roughness. The long one controls localization of dissolution surfaces and conduits; the short one is characteristic of dissolution surfaces. The dissolved matter can precipitate in the open structures of the hanging wall damage zone, decreasing the connectivity of the macroscopic conduit developed within this part of the fault zone.     

The radio frequency dielectric properties of the stratified UG1–UG2 geological unit in the Bushveld Complex

A new measurement technique enables the complex dielectric properties of the geological strata comprising the UG1–UG2 (Upper Group 1–Upper Group 2) unit of the Bushveld Complex in South Africa to be determined with unprecedented detail at radio frequencies (RF). Results of non-destructive laboratory measurements of representative diamond drill core samples from the UG1–UG2 unit are presented at 25 MHz. These data establish that the UG1 and UG2 chromitite layers are embedded in rock strata (norite, pyroxenite and anorthosite) which are translucent in the HF spectral band, whereas the chromitite layers themselves exhibit significant velocity contrast, making them good radar reflectors. The data presented here is useful for calibration of the radar system, and for predicting the range and resolution performance of borehole radars operating in both the hanging and footwalls of the economically important platiniferous UG2 reef.     

The Water Budget Myth and Its Recharge Controversy: Linear vs. Nonlinear Models

The water budget myth, which is the idea that safe pumping must not exceed the initial recharge, gave rise to a controversy about the role of recharge in assessing the sustainability of groundwater development. To refute the concept of safe yield, a simplified water budget equation is used, which equals the total pumping rate to the sum of capture and storage change. Since initial recharge and discharge are canceled out from this equation, it is concluded that sustainable pumping has nothing to do with recharge. Investigating the assumptions underlying this equation, it is seen that it expresses the superposition principle, which implicitly assumes the groundwater reservoir can be depleted indefinitely and boundary conditions are an infinite source of water. To evaluate sustainability, however, the limits of the aquifer system must be examined accurately. Theoretically, this can only be accomplished applying nonlinear models, in which case setting up the simplified water budget equation is impossible without knowing the initial conditions. Hence, excluding recharge when assessing sustainable pumping may not be done inconsiderately, which is illustrated by two examples. An analytical solution, developed by Ernst in 1971 to simulate flow to a well in a polder area with a nonlinear function for drainage, even shows that it is not necessarily a misconception to assume the cone of depression stops expanding when the pumping rate is balanced by the infiltration rate.     

Contribution of geophysical surveys to groundwater modelling of a porous aquifer in semiarid Niger: An overview

Subsurface geophysical surveys were carried out using a large range of methods in an unconfined sandstone aquifer in semiarid south-western Niger for improving both the conceptual model of water flow through the unsaturated zone and the parameterization of numerical a groundwater model of the aquifer. Methods included: electromagnetic mapping, electrical resistivity tomography (ERT), resistivity logging, time domain electromagnetic sounding (TDEM), and magnetic resonance sounding (MRS). Analyses of electrical conductivities, complemented by geochemical measurements, allowed us to identify preferential pathways for infiltration and drainage beneath gullies and alluvial fans. The mean water content estimated by MRS (13%) was used for computing the regional groundwater recharge from long-term change in the water table. The ranges in permeability and water content obtained with MRS allowed a reduction of the degree of freedom of aquifer parameters used in groundwater modelling.