Similarity Scaling Over a Steep Alpine Slope

In this study, we investigate the validity of similarity scaling over a steep mountain slope (30–41 $^\circ $ ). The results are based on eddy-covariance data collected during the Slope Experiment near La Fouly (SELF-2010); a field campaign conducted in a narrow valley of the Swiss Alps during summer 2010. The turbulent fluxes of heat and momentum are found to vary significantly with height in the first few metres above the inclined surface. These variations exceed by an order of magnitude the well-accepted maximum 10 % required for the applicability of Monin–Obukhov similarity theory in the surface layer. This could be due to a surface layer that is too thin to be detected or to the presence of advective fluxes. It is shown that local scaling can be a useful tool in these cases when surface-layer theory breaks down. Under convective conditions and after removing the effects of self-correlation, the normalized standard deviations of slope-normal wind velocity, temperature and humidity scale relatively well with $z/\varLambda $ , where $z$ is the measurement height and $\varLambda (z)$ the local Obukhov length. However, the horizontal velocity fluctuations are not correlated with $z/\varLambda $ under all stability regimes. The non-dimensional gradients of wind velocity and temperature are also investigated. For those, the local scaling appears inappropriate, particularly at night when shallow drainage flows prevail and lead to negative wind-speed gradients close to the surface.     

Enhancing the relevance of Shared Socioeconomic Pathways for climate change impacts,adaptation and vulnerability research

This paper discusses the role and relevance of the shared socioeconomic pathways (SSPs) and the new scenarios that combine SSPs with representative concentration pathways (RCPs) for climate change impacts, adaptation, and vulnerability (IAV) research. It first provides an overview of uses of social–environmental scenarios in IAV studies and identifies the main shortcomings of earlier such scenarios. Second, the paper elaborates on two aspects of the SSPs and new scenarios that would improve their usefulness for IAV studies compared to earlier scenario sets: (i) enhancing their applicability while retaining coherence across spatial scales, and (ii) adding indicators of importance for projecting vulnerability. The paper therefore presents an agenda for future research, recommending that SSPs incorporate not only the standard variables of population and gross domestic product, but also indicators such as income distribution, spatial population, human health and governance.     

A Comparison between WCS and OPeNDAP for Making Model Results and Data Products Available through the Internet

Numerical models produce output with a large number of variables, grid cells and time steps. The same applies to algorithms that produce gridded datasets from sparse or abundant raw data. Further use of the resulting data products has been challenging, especially for dissemination outside the institute of origin. Due to the gradually increasing size of data products, simply downloading copies of them is becoming impossible. A gradual transition from traditional download methods to web services is therefore observed. Web services allow for on‐the‐fly access to subsets of data that were hitherto considered as indivisible granules. Here we compare the most mature candidates to serve gridded data through the web: the Open‐source Project for a Network Data Access Protocol (OPeNDAP) and Web Coverage Service (WCS) protocols. In the framework of the new Dutch National Model and Data Centre (NMDC.eu) a distributed data storage has been created by coupling OPeNDAP servers. A WCS service layer is provided for the same data. This allows us to compare OPeNDAP and WCS. Using several use cases, we compare the usability, performance and features of the two protocols.     

A multidisciplinary multi-scale framework for assessing vulnerabilities to global change

Terrestrial ecosystems provide a number of vital services for people and society, such as food, fibre, water resources, carbon sequestration, and recreation. The future capability of ecosystems to provide these services is determined by changes in socio-economic factors, land use, atmospheric composition, and climate. Most impact assessments do not quantify the vulnerability of ecosystems and ecosystem services under such environmental change. They cannot answer important policy-relevant questions such as 'Which are the main regions or sectors that are most vulnerable to global change?’ 'How do the vulnerabilities of two regions compare?’ 'Which scenario is the least harmful for a sector?’This paper describes a new approach to vulnerability assessment developed by the Advanced Terrestrial Ecosystem Analysis and Modelling (ATEAM) project. Different ecosystem models, covering biodiversity, agriculture, forestry, hydrology, and carbon sequestration are fed with the same Intergovernmental Panel on Climate Change (IPCC) scenarios based on the Special Report on Emissions Scenarios (SRES). Each model gives insights into specific ecosystems, as in traditional impact assessments. Moreover, by integrating the results in a vulnerability assessment, the policy-relevant questions listed above can also be addressed. A statistically derived European environmental stratification forms a key element in the vulnerability assessment. By linking it to other quantitative environmental stratifications, comparisons can be made using data from different assessments and spatial scales.     

Single GPS receiver time-relative positioning with loop misclosure corrections

Time-relative positioning makes use of observations taken at two different epochs and stations with a single global positioning system (GPS) receiver to determine the position of the unknown station with respect to the known station. The limitation of this method is the degradation over time of the positioning accuracy due to the temporal variation of GPS errors (ionospheric delay, satellite clock corrections, satellite ephemerides, and tropospheric delay). The impact of these errors is significantly reduced by adding to the one-way move from the known to the unknown station, a back move to the known station. A loop misclosure is computed from the coordinates obtained at the known station at the beginning and at the end of the loop, and is used to correct the coordinates of the unknown station. The field tests, presented in this paper, show that using the loop misclosure corrections, time-relative positioning accuracy can be improved by about 60% when using single frequency data, and by about 40% with dual frequency data. For a 4-min processing interval (an 8-min loop) and a 95% probability level, errors remain under 20 cm for the horizontal components and 36 cm for the vertical component with single frequency data; and under 11 cm for the horizontal components and 29 cm for the vertical component with dual frequency data.     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

Fast robust large-scale mapping from video and internet photo collections

This paper presents a system approaching fully automatic 3D modeling of large-scale environments. Our system takes as input either a video stream or collection of photographs obtained from Internet photo sharing web-sites such as Flickr. The system achieves high computational performance through algorithmic optimizations for efficient robust estimation, the use of image-based recognition for efficient grouping of similar images, and two-stage stereo estimation for video streams that reduces the computational cost while maintaining competitive modeling results. In addition to algorithmic advances, we achieve a major improvement in computational speed through parallelization and execution on commodity graphics hardware. These improvements lead to real-time video processing and to reconstruction from tens of thousands of images within the span of a day on a single commodity computer. We demonstrate modeling results on a variety of real-world video sequences and photo collections.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Subsidence of the Miyako‐Sone submarine carbonate platform,east of Miyako‐jima Island,northwestern Pacific Ocean

Bathymetric mapping and observations of the seafloor using a remotely operated vehicle (ROV, Hyper‐Dolphin 3K) were carried out on the slopes of the Miyako‐Sone submarine platform, east of Miyako‐jima in the Ryukyu Islands, northwestern Pacific Ocean. The bathymetric map indicates that terraces are present at water depths of approximately 140 m, 330 m, 400 m, and 680 m on the northwestern slope of the platform. A number of NW–SE trending lineaments, probably faults, extend perpendicular to the axis of the Ryukyu Island Arc. Two ROV surveys were conducted at water depths ranging from 519 m (on the slope) to 121 m (shallowest part of the platform). The surveys revealed that well‐indurated carbonate rocks are exposed at terrace margins and on upper slopes, and that the lower slopes are covered with modern sediments consisting of unconsolidated, coarse‐sand‐sized bioclastic carbonates. Calcareous nannofossils from the well‐indurated carbonate rocks indicate a Middle–Late Pleistocene age, which suggests that the rocks correlate with the Quaternary reef and fore‐reef deposits of the Ryukyu Group (Ryukyu Limestone) on the Ryukyu Islands. No siliciclastic deposits corresponding to the upper Miocene–lower Pleistocene Shimajiri Group (as exposed on Okinawa‐jima and Miyako‐jima islands) were recovered during the surveys. Coeval well‐indurated carbonate rocks, all of which formed in a similar sedimentary environment, have been downthrown towards the west due to displacements on the western sides of normal faults. Subsidence of the Miyako‐Sone submarine platform was the result of large vertical displacements on such normal faults. The timing of initial subsidence cannot be tightly constrained, but the presence of the youngest limestone at progressively lower levels towards the west suggests the subsidence continued until after 0.265 Ma.