Wave prediction in a port using a fully nonlinear Boussinesq wave model

A wave forecasting system using FUNWAVE-TVD which is based on the fully nonlinear Boussinesq equations by Chen(2006) was developed to provide an accurate wave prediction in the Port of Busan, South Korea. This system is linked to the Korea Operational Oceanographic System(KOOS) developed by Park et al.(2015). The computational domain covers a region of 9.6 km×7.0 km with a grid size of 2 m in both directions, which is sufficient to resolve short waves and dominant sea states. The total number of grid points exceeds 16 millions,making the model computational expensive. To provide real-time forecasting, an interpolation method, which is based on pre-calculated results of FUNWAVE-TVD and SWAN forecasting results at the FUNWAVE-TVD offshore boundary, was used. A total of 45 cases were pre-calculated, which took 71 days on 924 computational cores of a Linux cluster system. Wind wave generation and propagation from the deep water were computed using the SWAN in KOOS. SWAN results provided a boundary condition for the FUNWAVE-TVD forecasting system. To verify the model, wave observations were conducted at three locations inside the port in a time period of more than 7 months. A model/model comparison between FUNWAVE-TVD and SWAN was also carried out. It is found that, FUNWAVE-TVD improves the forecasting results significantly compared to SWAN which underestimates wave heights in sheltered areas due to incorrect physical mechanism of wave diffraction, as well as large wave heights caused by wave reflections inside the port.     

Origin of Mesozoic gold mineralization in South Korea

Abstract   The Mesozoic gold–silver deposits in South Korea are closely associated with the Mesozoic granitoids. The Jurassic gold–silver deposits can be distinguished from the Cretaceous ones in terms of occurrence, alteration style, gold fineness, associated mineral assemblage, fluid inclusion and stable isotopic compositions. The Jurassic deposits were formed in mesozonal environments related to deep-seated granitoids, whereas the Cretaceous ones were formed in epizonal environments related to shallow-level granitoids. The Jurassic auriferous deposits (about 165–145 Ma) show fluid characteristics typical of an orogenic-type gold deposit, and were probably generated in a compressional regime caused by an orthogonal convergence of the Izanagi oceanic plate into the Asiatic margin. However, strike-slip faults and caldera-related fractures, together with subvolcanic to volcanic activity, may have played an important role in the formation of Cretaceous gold–silver lode deposits (about 110–45 Ma) under a continental arc setting.     

Assessment of debris flow multiple-surge load model based on the physical process of debris-barrier interaction

Debris-flow impact load is one of the key parameters for design of engineering countermeasures. The multiple-surge load model is a remarkable progress in estimating the debris-flow impact load, which clearly delineates the contribution of each surge to the total impact load and the corresponding acting points. In order to better understand the impact process of channelized debris flow against flexible barrier, a series of medium-scale flume experiments with varying debris-flow volumetric solid concentration (0.40/0.50/0.55) were conducted. Especially, surge impact behavior is focused so that the predictability of the multiple-surge load model could be assessed. The flume and model flexible barrier were instrumented so that both the barrier dynamic response and the debris-flow properties (flow regime) could be correlated to facilitate the assessment. The results show that multiple-surge load model well predicts the total impact load. However, due to the simplification in the impact process, the interaction between the mobile phase (surge) and the deposited phase is ignored, resulting in discrepancy in the load distribution between the model prediction and experimental result. The remixing of deposited debris by the subsequent surges leads to downward momentum transfer to the lower section of barrier, which should be regarded as an adverse scenario of the design of flexible-barrier anchor capacity.

     

Longitudinal variation and waves in Jupiter’s south equatorial wind jet

A detailed study of the chevron-shaped dark spots on the strong southern equatorial wind jet near 7.5°S planetographic latitude shows variations in velocity with longitude and time. The presence of the large anticyclonic South Equatorial Disturbance (SED) has a profound effect on the chevron velocity, causing slower velocities to its east and increasing with distance from the disturbance. The chevrons move with velocities near the maximum wind jet velocity of ～140 m/s, as deduced by the history of velocities at this latitude and the magnitude of the symmetric wind jet near 7°N latitude. Their repetitive nature is consistent with a gravity-inertia wave (n = 75–100) with phase speed up to 25 m/s, relative to the local flow, but the identity of this wave mode is not well constrained. However, for the first time, high spatial resolution movies from Cassini images show that the chevrons oscillate in latitude with a 6.7 ± 0.7-day period. This oscillating motion has a wavelength of ～20° and a speed of 101 ± 3 m/s, following a pattern similar to that seen in the Rossby wave plumes of the North Equatorial Zone, and possibly reinforced by it. All dates show chevron latitude variability, but it is unclear if this larger wave is present during other epochs, as there are no other suitable time series movies that fully delineate it. In the presence of multiple wave modes, the difference in dominant cloud appearance between 7°N and 7.5°S is likely due to the presence of the Great Red Spot, either through changes in stratification and stability or by acting as a wave boundary.     

Silicon control of strontium and cesium partitioning in hydroxide-weathered sediments

Cation partitioning and speciation in an aqueous soil suspension may depend on the coupling of reaction time, sorbate amount and mineral weathering reactions. These factors were varied in sediment suspension experiments to identify geochemical processes that affect migration of Sr²⁺ and Cs⁺ introduced to the subsurface by caustic high level radioactive waste (HLRW). Three glacio-fluvial and lacustrine sediments from the Hanford Site (WA, USA) were subjected to hyperalkaline (pH > 13), Na-Al-NO₃-OH solution conditions within a gradient field of (i) sorptive concentration (10⁻⁵-10⁻³ m) and (ii) reaction time (0-365 d). Strontium uptake (q_Sr) exceeded that of cesium at nearly all reaction times. Sorbent affinity for both Cs⁺ and Sr²⁺ increased with clay plus silt content at early times, but a prolonged slow uptake process was observed over the course of sediment weathering that erased the texture effect for Sr²⁺; all sediments showed similar mass normalized uptake after several months of reaction time. Strontium became progressively recalcitrant to desorption after 92 d, with accumulation and aging of neoformed aluminosilicates. Formation of Cs⁺ and Sr²⁺-containing cancrinite and sodalite was observed after 183 d by SEM and synchrotron μ-XRF and μ-XRD. EXAFS data for q_Sr ≈ 40 mmol kg⁻¹ showed incorporation of Sr²⁺ into both feldspathoid and SrCO₃(s) coordination environments after one year. Adsorption was predominant at early times and low sorbate amount, whereas precipitation, controlled largely by sediment Si release, became increasingly important at longer times and higher sorbate amount. Kinetics of contaminant desorption at pH 8 from one year-weathered sediments showed significant dependence on background cation (Ca²⁺ versus K⁺) composition. Results of this study indicate that co-precipitation and ion exchange in neoformed aluminosilicates may be an important mechanism controlling Sr²⁺ and Cs⁺ mobility in siliceous sediments impacted by hyperalkaline HLRW.     

New polymorphic microsatellite markers derived from hemocyte cDNA library of Manila clam <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis> challenged by the protozoan parasite <Emphasis Type="Italic">Perkinsus olseni</Emphasis>

Manila clam Ruditapes philippinarum is one of the most important benthic animals in the coastal north Pacific region, where clam populations have been mixed genetically through trade and aquaculture activities. Accordingly, identification of the genetically different clam populations has become one of the most important issues to manage interbreeding of the local and introduced clam populations. To identify genetically different populations of clam populations, we developed 11 expressed sequence tag (EST)-microsatellite loci (i.e., simple sequence repeat, SSR) from 1,128 clam hemocyte cDNA clones challenged by the protozoan parasite Perkinsus olseni. Genotype analysis using the markers developed in this study demonstrated that clams from a tidal flat on the west coast contained 6 to 19 alleles per locus, and a population from Jeju Island had 4 to 20 alleles per locus. The expected heterozygosity of the 2 clam populations ranged from 0.472 to 0.919 for clams from the west coast, and 0.494 to 0.919 for clams from Jeju Island, respectively. Among the 11 loci discovered in this study, 7 loci significantly deviated from the Hardy-Weinberg equilibrium after Bonferroni correction. The 5 loci developed in this study also successfully amplified the SSRs of R. variegatus, a clam species taxonomically very close to R. philippinarum, from Hong Kong and Jeju Island. We believe that the 11 novel polymorphic SSR developed in this study can be utilized successfully in Manila clam genetic diversity analysis, as well as in genetic discrimination of different clam populations.     

Tracing the origin of Pb using stable Pb isotopes in surface sediments along the Korean Yellow Sea coast

To investigate the factors controlling lead (Pb) concentration and identify the sources of Pb in Yellow Sea sediments along the Korean coast, the concentration of Pb and Pb isotopes in 87 surface and 6 core sediment samples were analyzed. The 1 M HCl leached Pb concentrations had a similar geographic distribution to those of fine-grained sediments, while the distribution of residual Pb concentrations resembled that of coarse-grained sediments. Leached Pb was presumed to be associated with manganese (Mn) oxide and iron (Fe) oxy/hydroxide, while residual Pb was associated with potassium (K)-feldspar, based on good linear relationships between the leached Pb and the Fe/Mn concentrations, and the residual Pb and K concentrations. Based on a ratio–ratio plot with three isotopes (²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb) and the geographic location of each sediment, sediments were categorized into two groups of samples as group1 and group2. Group 1 sediments, which were distributed in Gyeonggi Bay and offshore (north of 36.5°N), were determined to be a mixture of anthropogenic and natural Pb originating from the Han River, based on a ²⁰⁸Pb/²⁰⁶Pb against a Cs/Pb_leached mixing plot of core and surface sediments. Group 2 sediments, which were distributed in the south of 36.5°N, also showed a two endmembers mixing relationship between materials from the Geum River and offshore materials, which had very different Pb concentrations and isotope ratios. Based on the isotopes and their concentrations in core and surface sediments, this mixing relationship was interpreted as materials from two geographically different origins being mixed, rather than anthropogenic or natural mixing of materials with the same origin. Therefore, the relative percentage of materials supplied from the Geum River was calculated using a two endmembers mixing model and estimated to be as much as about 50% at 35°N. The spatial distribution of materials derived from the Geum River represented that of fine-grained sediments originating from the Geum River. It was concluded that Pb isotopes in sediments could be used as a tracer in studies of the origin of fine-grained sediments along the Korean Yellow Sea coast.