The Effects of Inner- and Outer-Layer Turbulence in a Convective Boundary Layer on the Near-Neutral Inertial Sublayer Over an Urban-Like Surface

A large-eddy simulation of the atmospheric boundary layer, large enough to contain both an urban surface layer and a convective mixed layer, was performed to investigate inner-layer and outer-layer scale motions. The objective was to determine the applicability of Monin–Obukhov similarity theory to inner-layer motions, to investigate the influence of outer-layer motions on surface-layer structure, as well as to assess the interaction of the two scales of motion. The urban surface roughness consisted of square-patterned cubic buildings of dimension H (40 m). A spatial filter was used to decompose the two scales in the inertial sublayer. The horizontal square filter of size 10H was effective in separating the inner-layer (surface-layer height ≈ 2 H) and outer-layer scales (boundary-layer height δ ≈ 30H), where the Reynolds stress contribution of the inner layer dominates in the logarithmic layer (depth 2H). Similarity coefficients for velocity fluctuations were successfully determined for inner-layer motions in the surface layer, proving the robustness of Monin–Obukhov similarity for surface-layer turbulence. The inner-layer structures exhibit streaky structures that have similar streamwise length but narrower spanwise width relative to the streamwise velocity fluctuation field, consistent with observations from an outdoor scale model. The outer-layer motions to some extent influence the location of ejections and sweeps through updraft and downdraft motions, respectively, thus, disturbing the homogeneity and similarity of inner-layer motions. Although the horizontal averages of the variances and covariance of motions reveal that the Reynolds stresses are dominated by inner-layer structures, the localized influence of the interaction of outer-layer horizontal and inner-layer vertical motions on the Reynolds stress is not insignificant.     

Large-Eddy Simulation for the Mechanism of Pollutant Removal from a Two-Dimensional Street Canyon

Large-eddy simulation (LES) is conducted to investigate the mechanism of pollutant removal from a two-dimensional street canyon with a building-height to street-width (aspect) ratio of 1. A pollutant is released as a ground-level line source at the centre of the canyon floor. The mean velocities, turbulent fluctuations, and mean pollutant concentration estimated by LES are in good agreement with those obtained by wind-tunnel experiments. Pollutant removal from the canyon is mainly determined by turbulent motions, except in the adjacent area to the windward wall. The turbulent motions are composed of small vortices and small-scale coherent structures of low-momentum fluid generated close to the plane of the roof. Although both small vortices and small-scale coherent structures affect pollutant removal, the pollutant is largely emitted from the canyon by ejection of low-momentum fluid when the small-scale coherent structures appear just above the canyon where the pollutant is retained. Large-scale coherent structures also develop above the canyon, but they do not always affect pollutant removal.     

Holocene lake development and glacial-isostatic uplift at Lake Skallen and Lake Oyako,Lützow-Holm Bay,East Antarctica: Based on biogeochemical facies and molecular signatures

The paleolimnology of two lakes which were isolated as a result of the crustal uplift during the late Holocene along the Soya Coast, Lützow-Holm Bay, East Antarctica were studied. The focus was on temporal variations in the biogeochemical composition of sediment cores recovered from Lake Skallen at Skallen and Lake Oyako at Skarvsnes. Both sets of lake sediments record environmental changes associated with a transition from marine to lacustrine settings, as indicated by analyses of C and N contents, nitrogen isotopic compositions (δ¹⁵N), and major element concentrations. Changes in the dominant primary producers during the marine–lacustrine transition (marine diatom to cyanobacteria) at L. Skallen was clearly revealed by biogenic opal-A, diatom assemblages, and molecular signature from denaturing gradient gel electrophoresis (DGGE) with 16S ribosomal RNA (rRNA) gene analysis. Radiocarbon dating of acid-insoluble organic C suggested that the environmental transition from marine to fresh water occurred at 2940 ± 100 cal yr BP at L. Skallen and 1060 ± 90 cal yr BP at L. Oyako. Based on these data, a mean crustal uplift rate of 3.2 mm yr⁻¹ is inferred for the history of marine–lacustrine transition via brackish conditions. The geological setting causing glacio-isostatic uplift was the primary factor in controlling the transition event in sedimentary and biological facies.     

Increases of wet deposition at remote sites in Japan from 1991 to 2009

Temporal trends in wet deposition of major ions were explored at nationwide remote sites in Japan from April 1991 to March 2009 by using the seasonal Kendall slope estimator and the nonparametric seasonal Kendall test. For the trend analysis, datasets from eight remote sites (Rishiri, Echizenmisaki, Oki, Ogasawara, Shionomisaki, Goto, Yakushima, and Amami) were selected from the Japanese Acid Deposition Survey (JADS) conducted by the Ministry of the Environment. Deposition of H⁺ has been increasing at remote sites in Japan on a national scale. Significant (p????0.05) increases in H⁺ deposition were detected with changes of +3?C+9?%?year^?1 at seven sites, while insignificant increases were observed at one site. Depositions of non-sea salt (nss)-SO ₄ ^2? and NO ₃ ^? significantly increased at four and six sites, respectively, with changes of +1?C+3?%?year^?1. Significant increases in precipitation at four sites would have contributed to the increase in depositions of H⁺, nss-SO ₄ ^2? , and NO ₃ ^? . The emission trends of SO₂ and NO_x did not corresponded to the deposition trends of nss-SO ₄ ^2? and NO ₃ ^? . The different trends indicated that temporal variation of precipitation amount trend dominated the deposition trends.     

A Challenge of Water Purification in Dokai Bay, Japan

A history of water pollution and countermeasures for water purification in Dokai Bay, Japan are reviewed. Now, Dokai Bay suffers from the occurrences of red tides and oxygen-deficiency in summer. In order to prevent the occurrences of red tides and oxygen-deficiency, an ecological numerical model has been developed. The model experiments forecast that when the phosphorus or nitrogen load from land will be cut by 90% or 95%, respectively, red tides and oxygen-deficiency will not occur in Dokai Bay. If the industrial and sewage facilities are not sufficient to cut the nutrients load to the necessary degree, we have to consider other countermeasures such as cultivating bivalves and algae in order to decrease the nutrients concentration in the bay. International co-operation related to coastal zone management is also discussed.     

Surface current and vertical thermal structure on the continental slope in Tosa Bay

In order to specify a vertical thermal structure related to surface current variation on the continental slope in Tosa Bay, Japan, we analyzed monthly regular hydrographic measurements in the years 1991–2004. Subsurface temperature below 200 m on the slope was found to vary synchronously with the vertical displacement of the main thermocline around 200 m. It is shown that the vertical-averaged temperature below 200 m is significantly correlated with an along-isobath/southwestward surface current velocity on the slope. This correlation indicates that when a strong (weak) southwestward surface current is observed, temperature below 200 m decreases (increases) simultaneously, that is, isotherms below the 200 m are displaced upward (downward) together with the main thermocline. Moreover, when the strong southwestward flow is detected, across-isobath isotherms around 200 m slope upward toward the offshore direction. Furthermore, it is suggested that as the Kuroshio axis moves offshore south of the bay, the southwestward flow tends to be weakened by the combined effect of other Kuroshio parameters such as transport and stream width as well as the Kuroshio axis position. As a result, it is inferred that the correlation between the surface current and subsurface temperature can be interpreted in terms of the formation and decay of an anticlockwise circulation interacting with a cold eddy.     

Subsidence associated with the LUSI mud eruption,East Java,investigated by SAR interferometry

A mud volcano LUSI initiated its eruption on 29 May 2006, adjacent to a hydrocarbon exploration well in East Java. Ground subsidence in the vicinity of the LUSI eruptive vent was well recorded by a Synthetic Aperture Radar (SAR) PALSAR onboard the Japanese ALOS satellite. We apply an Interferometric SAR (InSAR) technique on ten PALSAR data scenes, acquired between 19 May 2006 and 21 May 2007, in order to obtain continuous maps of ground displacements around LUSI. Although the displacements in the area closest to the eruptive vent (spatial extension of about 1.5 km) are not detectable because of the erupted mud, all the processed interferograms indicate subsidence in an ellipsoidal area of approximately 4 km (north–south) × 3 km (east–west), centered at the main eruptive vent. In particular, interferograms spanning the first four months until 4 Oct. 2006 and the subsequent 46 days between 4 Oct. 2006 and 19 Nov. 2006 show at least about 70 cm and 80 cm of displacements away from the satellite, respectively. Possible causes of the subsidence, i.e., 1) loading effect of the erupted mud, 2) creation of a cylindrical mud conduit, and 3) pressure decrease and depletion of materials at depth, are investigated. The effects of the first two causes are found to be insufficient to explain the total amount of subsidence observed in the first six months. The third possibility is quantitatively examined using a boundary element approach by modeling the source of deformation as a deflating oblate spheroid. The spheroid is estimated to lie at depths of a few hundred to a thousand meters. The estimated depths are significantly shallower than determined from analyses of erupted mud samples; the difference is explained by presence of significant amount of inelastic deformation including compaction and downward transfer of material.     

PSP-toxicification of the carnivorous gastropod Rapana venosa inhabiting the estuary of Nikoh River, Hiroshima Bay, Hiroshima Prefecture, Japan

During surveillance on the toxicity of invertebrates such as bivalves inhabiting the coasts of Hiroshima Bay in 2001 and 2002, the carnivorous gastropod rapa whelk Rapana venosa collected in the estuary of Nikoh River, was found to contain toxins which showed paralytic actions in mice; the maximum toxicities (as paralytic shellfish poison, PSP) were 4.2 MU/g (May 2001) and 11.4 MU/g (April 2002). Their total toxicities were 224 and 206 MU/viscera of one specimen throughout the monitoring period. Attempts were made to identify the toxic principle in the gastropod. The viscera were extracted with 80% ethanol acidified with acetic acid, followed by defatting with dichloromethane. The aqueous layer obtained was treated with activated charcoal and then applied to a Sep-Pak C18 cartridge. The unbound toxic fraction was analyzed by high-performance liquid chromatography techniques. The gastropod toxin was rather unexpectedly identified as PSP. It was comprised of high toxic component (gonyautoxin-3; GTX3, GTX2, saxitoxin; STX) as the major components, which accounted for approximately 91 mol% of all components along with C1 and C2, which are N-sulfocarbamoyl derivatives. Judging from their toxin patterns, it is suggested that the PSP toxification mechanism of the gastropod that PSP toxins produced by phytoplankton such as Alexandrium tamarense, are transferred to and accumulated in plankton feeders such as the short-necked clam, and then transferred to this carnivorous rapa whelk R. venosa through predation.     

Wells turbine with end plates for wave energy conversion

In order to improve the performance of the Wells turbine for wave energy conversion, the effect of end plate on the turbine characteristics has been investigated experimentally by model testing. As a result, it is found that the characteristics of the Wells turbine with end plates are superior to those of the original Wells turbine, i.e., the turbine without end plate and the characteristics are dependent on the size and position of end plate. Furthermore, by using a computational fluid dynamics (CFD), reason of the performance improvement of the turbine has been clarified and the effectiveness of the end plate has been demonstrated.