Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.     

Geology and petroleum potential of the Fairway Basin in the Tasman Sea

The Fairway Basin is a large, generally north – south-trending, sediment-filled structure in water 1500 – 3000 m deep, on the eastern slope of the Lord Howe Rise in the Tasman Sea, and is partly within Australian jurisdiction. It was poorly known until a few years ago, when seismic profiling and piston coring cruises were carried out. The basin, about 1100 km long and 120 – 200 km wide, can be divided into three segments—north, central and south—that trend northwest, north and north-northwest, respectively. All three segments probably formed by thinning of continental crust during breakup of Lord Howe Rise and surrounding aseismic continental ridges in the Late Cretaceous and Paleocene. Normal faulting, large inputs of terrigenous sediment and subsidence to bathyal marine depths occurred during that time. A period of compression, perhaps related to overthrusting on New Caledonia, occurred in the Eocene, leading to uplift (and in parts, erosion) of northern Lord Howe Rise, and reversal of faulting in the basin. By the Oligocene, the area was again in bathyal depths, and pelagic ooze and some turbidites accumulated. The basinal sequence is generally 2000 – 4000 m thick, with 1200 – 3200 m of Cretaceous to Eocene sediment concentrated in depocentres, capped by 500 – 800 m of Oligocene and younger sediment. In the depocentres, numerous sedimentary diapirs pierce sedimentary sequences. The sedimentary diapirs appear to be fed by Cretaceous muds deposited during rifting. Often, these diapirs are overlain by faults extending to the seafloor, and hummocky bathymetry is possibly caused by fluid escape. The overall geology suggests that the Fairway Basin may be a large frontier hydrocarbon province. Seismic profiles display a bottom-simulating reflector above many depocentres, 500 – 700 m below the seafloor. The bottom-simulating reflector has positive polarity, which could result from a diagenetic phase transformation, a thin gas hydrate layer with a sharp top, or from the sharp base of a gas layer (probably beneath gas hydrates). Standard piston cores taken above diapirs and apparent fluid-escape features have recovered little gas. Other than drilling, the next steps in assessing petroleum potential are to clearly document fluid-escape structures, and to sample any fluids emitted for hydrocarbons.     

Coral recruitment onto an experimental pulverised fuel ash-concrete artificial reef

An experimental artificial reef was deployed in December 1993 at Hoi Ha Wan Marine Park, Hong Kong. This is the first study documenting natural scleractinian coral recruitment onto a stabilised pulverised fuel ash (PFA)-concrete artificial reef. Visible recruits were first recorded 9-10 months after the placement of reef blocks, i.e., in the autumn of 1994. Two scleractinians, Oulastrea crispata and Culicia japonica, were recruited. The recruit density of the former was much greater than the latter. The spatial recruitment pattern of the corals was observed to be affected by the orientation of the attaching surface. O. crispata settled predominantly on the undersides of the reef blocks. There was an edge effect on O. crispata recruitment. C. japonica, however, had a preference for exposed surfaces. O. crispata did not show a preference for block composition whereas C. japonica favoured blocks with high (75% by volume) PFA levels. This shows that PFA-concrete is a potential substratum for artificial reef construction, especially when such reefs aim at rehabilitating corals.     

Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Constraints on the flux of meteoritic and cometary water on the Moon from volatile element (N–Ar) analyses of single lunar soil grains,Luna 24 core

We report new nitrogen and argon isotope and abundance results for single breccia clasts and agglutinates from four different sections of the Luna 24 drill core in order to re-evaluate the provenance of N trapped in lunar regolith, and to place limits on the flux of planetary material to the Moon’s surface. Single Luna 24 grains with ⁴⁰Ar/³⁶Ar ratios <1 show δ¹⁵N values between ?54.5‰ and +123.3‰ relative to terrestrial atmosphere. Thus, low-antiquity lunar soils record both positive and negative δ¹⁵N signatures, and the secular increase of the δ¹⁵N value previously postulated by Kerridge (Kerridge, J.F. [1975]. Science 188(4184), 162–164. doi:10.1126/science.188.4184.162) is no longer apparent when the Luna and Apollo data are combined. Instead, the N isotope signatures, corrected for cosmogenic ¹⁵N, are consistent with binary mixing between isotopically light solar wind (SW) N and a planetary N component with a δ¹⁵N value of +100‰ to +160‰. The lower δ¹⁵N values of Luna 24 grains compared to Apollo samples reflect a higher relative proportion of solar N, resulting from the higher SW fluence in the region of Mare Crisium compared to the central near side of the Moon. Carbonaceous chondrite-like micro-impactors match well the required isotope characteristics of the non-solar N component trapped in low-antiquity lunar regolith. In contrast, a possible cometary contribution to the non-solar N flux is constrained to be ?3–13%. Based on the mixing ratio of SW to planetary N obtained for recently exposed lunar soils, we estimate the flux of micro-impactors to be (2.2–5.7) × 10³ tons yr^?1 at the surface of the Moon. Our estimate for Luna 24 agrees well with that for young Apollo regolith, indicating that the supply of planetary material does not depend on lunar location. Thus, the continuous influx of water-bearing cosmic dust may have represented an important source of water for the lunar surface over the past ～1 Ga, provided that water removal rates (i.e., by meteorite impacts, photodissociation, and sputtering) do not exceed accumulation rates.     

Fractional Crystallization and Liquid Immiscibility Processes in the Alkaline-Carbonatite Complex of Juqui (So Paulo, Brazil)

The Juqui circular intrusion, which is Cretaceous in age (130–135Ma), crops out in the Precambrian gneissic basement in Brazilover an area of 14 km2. It consists of olivine clinopyroxen-itecumulates (with minor olivine gabbros) in the northeastern sector(74 vol.%), whereas ijolites-melteigites-urtites (4%) and nephelinesyenites with minor essexites and syenodiorites (21%) outlinesubannular concentric patterns with an Mg-carbonatite core (1%), in the southwestern part of the complex. Petrographical, bulk rock, and mineral compositional trendsindicate that the origin of the complex can be largely accountedfor by shallow-level fractional crystallization of a carbonatedbasanitic parental magma. Such a magma was generated deep inthe subcontinental lithosphere by low-degree partial meltingof a garnet-phlogopite peridotite source. Mass-balance calculations in agreement with field volume estimatespermit definition of several fractionation stages of the magmaticevolution under nearly closed-system conditions, with inwarddevelopment of zonally arranged side-wall cumulates. These stagesinvolved: (1) fractionation from basanite to essexite magma(liquid fraction F = 33–5%) by crystallization of olivineclinopyroxenite plus minor olivine alkali gabbro cumulates;(2) derivation of the least differentiated mafic nepheline syenite(F = 5–5 %) from essexitic magma by subtraction of a syenodioriteassemblage; (3) exsolution of a carbonatite liquid (5%) froma CO₂-enriched mafic nepheline syenite magma, which also underwentcontinuous fractionation giving rise to ijolite-melteigite-urtitecumulates. The proportion of cumulus clinopyroxene and biotiteand intercumulus nepheline and alkali feldspar in these lastrocks, as well as the absence of alkalis in carbonatite, maybe attributed, at least in part, to loss of alkali-rich hydrousfluids released during and after the unmixing formation of thetwo conjugate liquids. The KD values determined for Mg-carbonatite/nepheline syeniteare lower (1–4–2–9) for light rare earth elements(LREE) than for REE from Eu to Yb (4–6–7–8),in contrast to recent experimental results (Hamilton et al.,1989). A possible explanation is that Juquia Mg-carbonatiterepresents an alreadydifferentiated magma, which underwent extensivefractionation of LREE-enriched calcite. In this way, the highvariability of K₀ REE patterns observed in several alkaline-carbonatitecomplexes can also be accounted for. The remarkably constant initial ⁸⁷Sr/⁸⁶Sr ratios (mostly between0–7052 and 0–7057) support the interpretation ofthe intrusion as having been generated by fractrional crystallizationand liquid immiscibility from a common parental magma. Iligherisotopic ratios (0–7060–0–7078), found mainlyin dykes and in the border facies of the intrusion, may be dueto contamination by the gecissic basement.     

Tellurides from Sunrise Dam gold deposit, Yilgarn Craton, Western Australia: a new occurrence of nagyágite

Summary The Cu–Fe–Au–Mo (W) deposits in southeastern Hubei are an important component of the Middle–Lower Yangtze River metallogenic belt. Molybdenite from the Fengshandong Cu- (Mo), Ruanjiawan W–Cu- (Mo), Qianjiawan Cu–Au, Tongshankou Cu–Mo and Tonglüshan Cu- (Fe) deposits yielded Re–Os ages of 144.0 ± 2.1 Ma, 143.6 ± 1.7 Ma, 137.7 ± 1.7 Ma, 142.3 ± 1.8–143.7 ± 1.8 Ma and 137.8 ± 1.7–138.1 ± 1.8 Ma, respectively. Phlogopite from the Tieshan Fe- (Cu) deposit yielded an Ar–Ar age of 140.9 ± 1.2 Ma. These data and other published isotopic ages (Re–Os molybdenite and Ar–Ar mica ages) for the Cu–Fe–Au–Mo (W) deposits in the Middle–Lower Yangtze River metallogenic belt show that Cu–Fe–Au–Mo (W) mineralisation in the Tongling, Anqing, Jiurui and Edong ore districts developed in a narrow time span between 135.5 and 144.9 Ma, reflecting an important regional metallogenic event. An integrated study of available petrological and geochronological data, together with relationships to magmatism and the regional geodynamic framework, indicate that the Cu–Fe–Au–Mo (W) mineralisation in the Middle–Lower Yangtze River belt occurred during a regime of lithospheric extension. This extension is probably related to Late Mesozoic processes of lower crustal delamination and lithospheric thinning in East China.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Finite element analysis for a finite conductivity fracture in an infinite poroelastic medium

In the technology of oil recovery, oil production rate can be increased by generation of a vertical conductive fracture adjacent to the well-bore. In this paper the seepage flow and isothermal deformation in both the oil formation and the fracture are studied by modelling the formation as a two-dimensional infinite poroelastic medium and the conductive fracture as a one-dimensional poroelastic material, saturated by a one-phase compressible fluid. The plane strain condition is employed. Solutions for a growing conductive fracture and a stationary conductive fracture in the infinite medium are obtained by means of the finite element method based on a variational principle for the formation which can impose the governing equations of the fracture. Infinite elements are used outside the finite element domain. Numerical results indicate that the injection rate, the applied pressure and the crack mouth opening displacement at the well-bore oscillate during the propagation of the conductive fracture. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture. Finally, a new definition of the conductivity coefficient for the conductive fracture is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

Cosmic‐ray rejection for single spectroscopic CCD images by means of template matching

This article describes a novel algorithm for cosmic‐ray rejection in single spectroscopic CCD images. This algorithm is based on a variation of template matching. It focuses on identifying those pixels belong to spectra, while other conventional algorithms tried to locate the cosmic‐ray hits directly. The main principle is applying template matching to find suspicious blocks, which is followed by surface patching to locate the legitimate pixels accurately. Therefore, the rest pixels are the ones corrupted by cosmic‐ray hits. Meanwhile, almost all the parameters are automatically extracted from the images. Examples of its performance are given for both simulated and observed images. It shows an advantage of significantly low false alarm rate with relatively high detection rate (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)