Delineation of groundwater potential zones using remote sensing,GIS, and AHP technique in Tehran–Karaj plain,Iran

Evaluation of groundwater resources in dry areas without enough data is a challenging task in many parts of the world, including Tehran–Karaj plain in Iran, which includes Tehran, the capital city of Iran and Karaj, one of Iran’s biggest cities. Water demand due to increasing agricultural and industrial activities caused many problems in the field of water resources management. In this study, the potential of groundwater resources was evaluated using remote sensing, geographic information system (GIS), and analytic hierarchy process (AHP) for the first time. Digital Elevation Model from Shuttle Radar Topography Mission was used to generate a slope map and drainage density map. Three Landsat-8 satellite images were utilized to provide lineament density and land cover/land use maps. Geological and soil type maps were provided from the Geological Survey and Mineral Explorations of Iran (GSI). Tropical Rainfall Measuring Mission data were used to prepare average annual precipitation map. Discharge values from 102 pumping wells in the time period of 2002–2014 were used to evaluate the results. Seven data layers were prepared, and the geodatabase was made in GIS. The layers and their classes were assigned weights using AHP method. Finally, the layers were overlaid based on their weights, and the potential map of groundwater resources was generated. The area was classified into five zones with very high, high, moderate, low, and very low potentials. The zones covered 5.95, 32.90, 22.70, 10.20, and 28.25% of the study area, respectively. The results showed good agreement with the field data obtained from discharge wells.     

The performance of SPI and PNPI in analyzing the spatial and temporal trend of dry and wet periods over Iran

Drought monitoring is carried out using various drought indices, including SPI, to generate time series of dry and wet periods. Furthermore, the dispersion of dry and wet periods was embossed with different intensities (high, medium, and low) over the data record years. Although these results were very necessary for planning and predicting future droughts, it appeared that the application of any trend over dry and wet periods could provide more accurate and unbiased or safer predictions in terms of analysis process. Generally, most of the researchers believed that the results of a drought trend analysis have been influenced by short-term persistence or significant autocorrelation with different lags on drought event time series and the mentioned impact should be preferably removed. Accordingly, drought monitoring was accomplished using SPI and PNPI drought indices to extract time series of dry and wet periods in terms of 50-year (1965–2014) annual rainfall data of 40 synoptic stations over Iran. Having used the basic and modified Mann–Kendall nonparametric tests, it was attempted to analyze the trend of dry and wet periods extracted from mentioned indices. The results represent the relative advantage of using the modified Mann–Kendall test in drought trend analysis. Furthermore, it was shown that the trend of dry and wet periods was negative in the majority of selected stations and that this trend was significant at 95% confidence level in northwest of Iran. Also, the results indicated the similar performance of SPI and PNPI indices in trend analysis of dry and wet periods.

     

Inverse modeling of variable-density groundwater flow in a semi-arid area in Iran using a genetic algorithm

Flow and mass transport parameter estimation was done by creating an inverse model of a seawater intrusion system using a genetic algorithm (GA) method as the optimization procedure. Firstly, the SEAWAT code was used for the forward solution part and then a program was written in MATLAB for coupling the forward and inverse processes. The auto-calibration objective function was defined with the root mean square errors (RMSE) between the observed and the simulated values. A simple GA was used to minimize the RMSE criterion. The methodology was applied to a coastal aquifer with heterogeneous formations in a semi-arid area near salty Tashk Lake (electrical conductivity 61,420 µS/cm), Fars province, Iran. In the last two decades, the overexploitation of groundwater has caused a major water level drawdown and, consequently, salt-water intrusion. Firstly, flow and transport parameters (hydraulic conductivity, porosity, specific storage coefficient and longitudinal dispersivity) were estimated simultaneously in steady-state and, secondly, in the developed code, these results were used as initial values of the parameters in transient-state. Results show a good match for observed and simulated data. It can be concluded that GA is a helpful tool for automatic calibration of variable density fluid systems such as seawater intrusion cases.     

Modeling Uranium Transport in Koongarra, Australia: The Effect of a Moving Weathering Zone

Natural analogues are an important source of long-term data and may be viewed as naturally occurring experiments that often include processes, phenomena, and scenarios that are important to nuclear waste disposal safety assessment studies. The Koongarra uranium deposit in the Alligator Rivers region of Australia is one of the best-studied natural analogue sites. The deposit has been subjected to chemical weathering over several million years, during which many climatological, hydrological, and geological changes have taken place, resulting in the mobilization and spreading of uranium. Secondary uranium mineralization and dispersed uranium are present from the surface down to the base of the weathering zone, some 25 m deep. In this work, a simple uranium transport model is presented and sensitivity analyses are conducted for key model parameters. Analyses of field and laboratory data show that three layers can be distinguished in the Koongarra area: (1) a top layer that is fully weathered, (2) an intermediate layer that is partially weathered (the weathering zone), and (3) a lower layer that is unweathered. The weathering zone has been moving downward as the weathering process proceeds. Groundwater velocities are found to be largest in the weathering zone. Transport of uranium is believed to take place primarily in this zone. It appears that changes in the direction of groundwater flow have not had a significant effect on the uranium dispersion pattern. The solid-phase uranium data show that the uranium concentration does not significantly change with depth within the fully weathered zone. This implies that uranium transport has stopped in these layers. A two-dimensional vertically integrated model for transport of uranium in the weathering zone has been developed. Simulations with a velocity field constant in time and space have been carried out, taking into account the downward movement of this zone and the dissolution of uranium in the orebody. The latter has been modelled by a nonequilibrium relationship. In these simulations, pseudo-steady state uranium distributions are computed. The main conclusion drawn from this study is that the movement of the weathering zone and the nonequilibrium dissolution of uranium in the orebody play an important role in the transport of uranium. Despite the fact that the model is a gross simplification of what has actually happened in the past two million years, a reasonable fit of calculated and observed uranium distributions was obtained with acceptable values for the model parameters.     

An investigation of Malaysian granitic rocks as suitable sources of feldspar

Medium- to coarse-grained leucocratic granitic bodies containing more than 60% feldspar and less than 10% mafic minerals are found to be appropriate and potential source materials of local feldspar. Out of the 72 granite quarries/outcrops studied in Peninsular Malaysia, 31 have been identified as “ideal” sources of feldspar conforming to the “preferred” feldspar specification of >18% Al₂O₃, >11% (Na₂O+K₂O) and <0.3% Fe₂O₃. A feldspar recovery efficiency exceeding 60% was achieved in this study. Despite the positive and encouraging indication that the extracted feldspar samples of different chemical composition are found to be suitable for the general purpose of making ceramic bodies and glaze, the chemical content of the feldspar, nevertheless, could be critical for the manufacture of specific end products. At 1250°C all extracted feldspar samples were fused; however, at the lower temperature of 1170°C feldspar samples extracted from some “Central Belt granites” remained unfused. The Eastern Province granites generally yielded feldspars which show better fusion characteristics i.e. (unblemished) than those extracted from the Main Range Province. A valuable by-product of the feldspar extraction process is silica sand.     

Applications of innovative polygonal trend analyses to precipitation series of Eastern Black Sea Basin,Turkey

Theoretical and Applied Climatology - Examining historical variations of hydroclimatic variables can provide crucial information about changes of water resources in a water cycle. In this study,...     

A numerical study of geostrophic adjustment and frontogenesis

ＡＮｕｍｅｒｉｃａｌＳｔｕｄｙｏｆＧｅｏｓｔｒｏｐｈｉｃＡｄｊｕｓｔｍｅｎｔａｎｄＦｒｏｎｔｏｇｅｎｅｓｉｓＭａｊｉｄＭ．ＦａｒａｈａｎｉａｎｄＷｕＲｏｎｇｓｈｅｎｇ（伍荣生）ＤｅｐａｒｔｍｅｎｔｏｆＡｔｍｏｓｐｈｅｒｉｃＳｃｉｅｎｃｅｓ,Ｎａｎｊｉ...