Flow units delineation of multiple hydrocarbon reservoirs using hydraulic zonation technique via cluster analysis algorithm,Zeit Bay Field,Gulf of Suez,Egypt

Investigation of hydraulic units in drilled wells through multiple reservoirs in Zeit Bay Field is the main target of this paper. Karim Limestone and Nubian Sandstone are target reservoirs in this study. Hydraulic zones provide a fundamental unit for subsequent reservoir characterization and simulation and also prove to be helpful in defining future well completion and work over practices. Hydraulic zonation by means of cluster analysis has been utilized to achieve this target. Hierarchical cluster analysis, elbow method, and k-means clustering are the main steps of this analysis. Petrophysical properties obtained from cores are utilized to perform this zonation. These properties are permeability and porosity data. Results have been validated by comparing the geological behavior of each zone against the measured permeability curve. Finally through this zonation, flow units which have the potential to extract fluids are determined more accurately. Petroleum geologists and engineers are more interested in these results. The cluster analysis flow suggesting in this paper is cost-effective due to lack of need for any commercial software.     

Influence of the halokinesis on the clay mineral repartition of upper Maastrichtian–Ypresian in the Meknassy-Mezzouna basin,centerwestern Tunisia

The Meknassy-Mezzouna basin is affected by a fault system, assembling two main directions, northsouth and eastwest. The Triassic outcrops are widely noticeable at Jebel Jebbes El Meheri and the Mezzouna link. During the late Maastrichtian–Ypresian, the sedimentation in the basin is influenced by halokinetic events, which are clearly manifested either by the thickness of El Haria formation along the Triassic outcrops (rim syncline) or by an alteration surface at the top of the Abiod formation. Such events also confirm the emersion of the basin from the late Maastrichtian to the early Lutetian. However, the present work tries to highlight the effects of halokinetic uplift on the clay mineralogical variations at that area. In harmony with this halokinetic activity, the clay minerals of this time interval (during the late Maastrichtian–Ypresian) show a trend of variation which corresponds to the evolution from illite and kaolinite, indicating a strongly hydrolytic marine environment, to smectite, sepiolite, and palygorskite, reflecting a very rapid evolution from this marine environment to a lagoon environment, then to a more confined continental environment. In fact, the appearance of sepiolite and palygorskite on the top of El Haria formation and the Paleocene–Eocene transition can be explained by a transformation or neoformation mechanism in an alkaline environment, rich in silica and magnesium, under arid to semi-arid climatic conditions. Moreover, the palygorskite can be formed in continental deposits as well as in close marine environment, which displays a limited communication with the open sea. Under these conditions, the evaporation leads to high ionic concentration of alkaline pH, which is favorable to the formation and stability of this mineral.     

Study of geoid–quasigeoid separation obtained from terrestrial gravity data and two geopotential models

In this article, separation between the geoid and the quasigeoid was calculated using ground gravity data and the data extracted from two Global Geopotential Models (GGMs). The calculated results were compared together. To do so, the authors used the terrestrial gravity data in a vast region of Iran, comprising 8,245 stations which are kindly put in our disposal by the National Cartographic Center of Iran, as well as two GGMs, namely EGM96 and EGM2008 for comparison. The calculation of the separation for GGMs was performed by iteration method. The results showed that the geoid–quasigeoid separations obtained from the terrestrial data versus the orthometric heights are nonlinear in mountainous areas, whereas they are almost linear in flat regions due to decreasing the values of the topographic potential of the masses between the earth surface and the geoid. On the other hand, in case of GGMs, a positive correlation was observed between the separations and the orthometric heights in both mountainous and flat areas. As the difference between the separations extracted by two methods in mountainous areas—especially in the regions with ragged topography—differs strongly, it is recommended to use the dense gravity and height networks for accurate determination of the geoid–quasigeoid separation in these regions. Finally, we can conclude that the mean values of separation by two global geopotential models (EGM96 and EGM2008) are 21.87 and 21.23 cm, respectively, values which did not differ strongly, whereas this mean value obtained from ground gravity data is 16.10 cm, which differs from the GGMs’ results with approximately 5 cm.     

Surface soil assessment in the Ubhur area,north of Jeddah,western Saudi Arabia,using a multichannel analysis of surface waves method

Ten boreholes drilled in Ubhur area up to the depth of bedrock indicted the shallow depth of bedrock where the average depth ranges between 10 and 15 m. The standard penetration test N-values of these boreholes were measured and averaged. Based on N-values to the depth of bedrock, Ubhur area can be classified as site class C and D. Multichannel analysis of surface waves technique has been applied along seventy six profiles using 24-channel geophone array and 4.5Hz vertical geophones with 1m geophone spacing and sledgehammer and/or weight drop as seismic energy sources. Values of shear wave velocity to 30 m are calculated and then averaged (Vs30) where it ranges between 310.08 m/s and 1139.8 m/s. Therefore, Ubhur area can be classified into site class B, C and D based on site classification of the national earthquake hazards reduction program (NEHRP) recommendations. Accordingly, the greatest part of the study area falls in site class C while class B and D covered limited areas in the western and the eastern parts respectively. Depending on the shallow depth of bedrock in the study area, the Vs30 parameter is not applicable in the study area so the average values of Vs for the soil thickness, excluding the bedrock, have been calculated and mapped for site class C and D only. So Vs30 approach is not applicable for areas with shallow depth of bedrock which gives higher classification.     

Late Cretaceous calcareous nannofossil and planktonic foraminiferal bioevents of the shallow-marine carbonate platform in the Mitla Pass, west central Sinai, Egypt

The first detailed biostratigraphic analyses of the Coniacian-middle Campanian shallow-marine carbonate successions exposed in the Mitla Pass, west central Sinai, Egypt have revealed the stratigraphic distribution of diverse calcareous nannofossil and planktonic foraminiferal species. Thirty-six calcareous nannofossils and thirty-two planktonic foraminifera are identified, indicating a Coniacian to middle Campanian age and four Tethyan planktonic foraminiferal and five calcareous nannofossil zones. A comparison of these bioevents from different palaeolatitudes shows considerable variation in age.Three sequence boundaries coincident with the Turonian/Coniacian, Coniacian/Santonian and Santonian/Campanian stage boundaries are recognized. A fourth sequence boundary is marked by a major upper Campanian to early Ypresian (early Eocene) unconformity. These sequence boundaries are primarily related to regional tectonism associated with the Syrian Arc Fold System and secondarily to eustatic sea-level fluctuations.     

黔东南新元古代青白口纪下江群火山碎屑浊流沉积与金矿关系的初步研究

贵州省东南部和湖南省西部接壤的大片新元古代下江群分布地区盛产的石英脉型金矿具有较大远景。该套巨厚的砂质板岩、沉凝灰质板岩常被称为复理石组合。通过对锦屏县平秋剖面、锦屏-远口地区天柱剖面以及锦屏、铜鼓等地的考察研究，认为它们均属于火山碎屑浊流沉积。本次主要研究锦屏、天柱一带浊积岩的沉积特征、岩石学特征和金的地球化学背景值，并参考了大量区域地质资料，分析了黔东南地区青白口纪的番召期、清水江期、平略期和隆里期浊流沉积的古地理特征，指出石英脉金矿的分布受背斜轴的剪切带控制，而含沉凝灰岩的浊积岩还可能是其矿源层。     

Hydrogeochemical processes and multivariate analysis for groundwater quality in the arid Maadher region of Hodna,northern Algeria

Acta Geochimica - This study focused on water quality and hydro-geochemical processes (evolution, origin) in the Maadher region, central Hodna in Algeria. In recent decades, the excessive...     

A data model and algorithms for a spatial data marketplace

A data marketplace is a platform that facilitates online data trading. It gives sellers the capabilities of publishing data, defining the price function, the authorization rules and the data contract. It gives customers the capabilities to search for data services, to query for their price, to invoke them and to pay for the usage. As data are more and more emphasized as a payable asset, the need for data marketplaces rises. There is a lack of marketplace proposals for spatial data. This paper contributes to fill-in this gap. We propose a data model for representing the different types of data involved. The logical representation of data is a quadtree, and the physical representation fits into a key-value store. The model is thus logically simple and extensible, and physically scalable and highly available. We discuss price queries in detail and propose evaluation algorithms.     

Effect of polymer and fiber usage on dewatering and compressibility behavior of fly ash slurries

Coal ash producing is an increasing trend because of its high energy demand worldwide. For transportation, disposal, and reuse of the industrial waste materials, geotextile tube’s dewatering technology has been widely used over the last three decades, which helps to decrease the volume of the dewatered slurry. In this study, effect of usage of polymer and fibers on dewatering characteristic of fly ash slurries was investigated. For the experimental investigation, an anionic polymer and short nylon fibers were used. As a new concept, centrifuge test is introduced as an alternative for the widely used pressure filtration test (PFT). Centrifuge test was used to evaluate final solid content of the retained sediments and change in slurry volume of fly ash. Tests were conducted on unconditioned and anionic polyacrylamide and/or fiber conditioned fly ash slurries. Centrifuge test results were compared with PFT results with respect to final solid content. It was found that fiber and/or polymer usage has remarkable effect on the dewatering rate of fly ash slurry. It was also found that final solid content of fly ash slurries was decreased by inclusion of fibers and polymer, which indicates that fiber and/or polymer usage can create more permeable soil body.