Carboniferous ridge subduction in the Xingmeng Orogenic Belt: Constraints from geochronological,geochemical, and Sr-Nd-Hf isotopic analysis of strongly peraluminous granites and gabbro-diorites in the Xilinhot micro-continent

The Xingmeng Orogenic Belt evolved through a long-lived orogeny involving multiple episodes of subduction and accretion. However, there is a debate on its tectonic evolution during the Late Paleozoic. Here, we report geochemical, geochronological, and isotopic data from strongly peraluminous granites and gabbro-diorites from the Sunidzuoqi–Xilinhot region. Zircon U–Pb ages suggest that the intrusive rocks were emplaced during the Early Carboniferous (333–322 Ma). The granites exhibit geochemical characteristics similar to S-type granites, with high SiO₂ (72.34–76.53 wt.%), Al₂O₃ (12.45–14.65 wt.%), and A/CNK (1.07–1.16), but depleted Sr, Nb, and Ta contents. They exhibit positive ε_Nd(t) and ε_Hf(t) values (?0.3 to 2.8 and 2.7–5.7, respectively) and young Nd and Hf model ages (T_DM2(Nd)=853–1110 Ma and T_DM2(Hf)=975–1184 Ma), suggesting that they may be the partial melting products of heterogeneous sources with variable proportions of pelite, psammite, and metabasaltic rocks. The meta-gabbro-diorites from the Maihantaolegai pluton have low SiO₂ (47.06–53.49 wt.%) and K₂O (0.04–0.99 wt.%) contents, and demonstrate slight light rare earth element (REE) depletion in the chondrite-normalized REE diagrams. They have high zircon ε_Hf(t) values (14.41–17.34) and young Hf model ages (T_DM2(Hf)= 230–418 Ma), indicating a more depleted mantle source. The variations of the Sm/Yb and La/Sm ratios can thus be used to assess the melting degree of the mantle source from 5% to 20%, suggesting a quite shallow mantle melting zone. We propose that the petrogenesis and distribution of the strongly peraluminous granites and gabbro-diorites, as well as the tectonic architecture of the region, can be explained by a ridge subduction model. Based on these results, and previous studies, we suggest a southward ridge subduction model for the Sunidzuoqi–Xilinhot region.     

Coupled three-dimensional discrete element–finite difference simulation of dynamic compaction

Discrete element method has been widely adopted to simulate processes that are challenging to continuum-based approaches. However, its computational efficiency can be greatly compromised when large number of particles are required to model regions of less interest to researchers. Due to this, the application of DEM to boundary value problems has been limited. This paper introduces a three-dimensional discrete element–finite difference coupling method, in which the discrete–continuum interactions are modeled in local coordinate systems where the force and displacement compatibilities between the coupled subdomains are considered. The method is validated using a model dynamic compaction test on sand. The comparison between the numerical and physical test results shows that the coupling method can effectively simulate the dynamic compaction process. The responses of the DEM model show that dynamic stress propagation (compaction mechanism) and tamper penetration (bearing capacity mechanism) play very different roles in soil deformations. Under impact loading, the soil undergoes a transient weakening process induced by dynamic stress propagation, which makes the soil easier to densify under bearing capacity mechanism. The distribution of tamping energy between the two mechanisms can influence the compaction efficiency, and allocating higher compaction energy to bearing capacity mechanism could improve the efficiency of dynamic compaction.

     

Machine learning reveals the influences of grain morphology on grain crushing strength

Acta Geotechnica - Grain morphology has significant impacts on the mechanical behaviors of granular materials. However, its influences on grain breakage are still poorly understood due to the...     

地面气象观测无人值守系统的设计与应用

气象观测数据的传输率和可用率是气象预报服务及时准确的基础,是衡量通信系统运行可靠程度及运维保障能力的关键指标。长期以来,各级业务人员通过不间断值守班来保障气象观测数据的传输质量。随着现代化气象业务体系的不断发展,气象业务对资料传输的时效性、完整性要求也越来越高,对气象资料的综合监控能力也提出了更高的要求。在全国地面气象业务体制改革的要求下,广西率先在全国实行了基层台站无人值守业务调整,设计并实现广西地面气象观测无人值守系统。该系统集数据传输监控、数据传输时效统计于一体,通过自动监控告警、主备站资料(要素)智能识别替代、双条传输链路热备等设计,建立一套无人值守传输业务流程,从技术上支撑业务改革调整,大大降低基层业务人员工作强度。业务应用分析表明,无人值守系统运行可靠,业务质量保持高水平稳定,业务效益凸显。     

CWRF模式在中国夏季极端降水模拟的误差订正

利用1980—2015年6—8月我国逐日降水观测数据评估CWRF模式（Climate-Weather Research and Forecasting model）多种参数化方案对我国夏季日降水的模拟能力,并考察累积概率变换偏差订正法（CDFt）的订正效果。通过将广义帕累托分布（GPD）引入到偏差订正模型中,提出针对极端降水的累积概率变换偏差订正法（XCDFt）,检验和评估其对极端降水订正的适用性。结果显示:CWRF模式微物理过程选用Morrison-aerosol参数化方案组合对我国降水场的模拟较好,CDFt订正效果良好;XCDFt偏差订正模型能够较好地提取模式建模与验证时期变化信号,订正后相比订正前与观测极端降水的概率分布更为接近;经过XCDFt订正后华南、华中和华北地区20年一遇的极端降水重现水平较模拟值更接近观测值,可为CWRF模式提高极端降水的业务预测水平提供参考。     

数字化水位仪漏电干扰因素的分析与排除

主要针对数字化水位仪在运行过程中产生的漏电干扰进行了分析,并结合实际情况提出了具体有效的解决方案.     

应用线性合成概率方法探讨青藏高原北部地区强震趋势

基于周期谱分析基础上的线性合成概率预测方法,对青藏高原北部地区Ms≥7.0、Ms≥6.5强震进行了试验性研究,并利用其结果作为预测依据,对青藏高原北部地区强震趋势做了初步估计.利用该方法,本文还对东昆仑断裂带1900年以来的Ms≥7.0强震进行了研究.     

关于2021年5月滇西漾濞MS6.4地震序列特征及成因的初步研究

2021年5月21日21时48分在滇西苍山西麓漾濞地区发生MS6.4(MW6.1)强震,相关地震活动表现为一个典型的前震-主震-余震序列.本研究分别就该地震序列的构造背景、M1.0以上地震的双差定位、主要地震的矩张量反演和破裂传播方向、应力场反演及断层滑动趋势以及潮汐作用等方面进行了初步分析.矩张量反演结果表明,矩心深...     

佛山市顺德区飞鹅山Ⅲ号滑坡形成机理与防治技术

采用工程地质钻探、物探、地质测绘及室内试验等技术方法探讨飞鹅山Ⅲ号滑坡形成机理与防治技术。结果表明：1）滑坡体主要岩性为泥质粉砂岩,飞鹅山滑坡属于新形成的深层中型牵引式滑坡,在平面上呈圈椅状。2）滑坡属于双层滑面滑坡,主滑面以中型深层滑坡为主,主滑体上部发育中型中厚层滑坡。3）滑坡产生的原因为：(1)泥质粉砂岩倾向与坡向基本一致,且岩层倾角为中等倾角;(2)人工开挖使坡脚形成高陡临空面,抗滑力大为降低;(3)雨水沿层面及节理裂隙入渗至坡体深部,大大增加岩土体容重,同时泥质粉砂岩遇水软化,抗剪强度显著降低。4）结合该滑坡区地质环境条件,采用坡面削坡+锚杆（索）+格构梁+双排预应力锚拉抗滑桩+三维网植草绿化+截排水+毛石挡墙的综合治理方法进行防治,监测结果显示该滑坡变形及位移已得到有效控制,整治效果良好。     

氡测量在成都平原隐伏断裂研究中的初步应用

通过成都平原大邑—竹瓦铺—五珠沱断裂带、双流—成都—德阳断裂带两条NWW向隐伏断裂进行放射性伽玛能谱和氡气测量,对所获得的相关数据进行对比分析,用放射性测量的方法进一步确认和解释了这两条隐伏断裂的存在。