Acoustic monitoring of gas emissions from the seafloor. Part I: quantifying the volumetric flow of bubbles

Three decades of continuous ocean exploration have led us to identify subsurface fluid related processes as a key phenomenon in marine earth science research. The number of seep areas located on the seafloor has been constantly increasing with the use of multi-scale imagery techniques. Due to recent advances in transducer technology and computer processing, multibeam echosounders are now commonly used to detect submarine gas seeps escaping from the seafloor into the water column. A growing number of en-route surveys shows that sites of gas emissions escaping from the seafloor are much more numerous than previously thought. Estimating the temporal variability of the gas flow rate and volumes escaping from the seafloor has thus become a challenge of relevant interest which could be addressed by sea-floor continuous acoustic monitoring. Here, we investigate the feasibility of estimating the volumetric flow rates of gas emissions from horizontal backscattered acoustic signals. Different models based on the acoustic backscattering theory of bubbles are presented. The forward volume backscattering strength and the inversion volumetric flow rate solutions were validated with acoustic measurements from artificial gas flow rates generated in controlled sea-water tank experiments. A sensitivity analysis was carried out to investigate the behavior of the 120-kHz forward solution with respect to model input parameters (horizontal distance between transducer and bubble stream, bubble size distribution and ascent rate). The most sensitive parameter was found to be the distance of the bubble stream which can affect the volume backscattering strength by 20 dB within the horizontal range of 0–200 m. Results were used to derive the detection probability of a bubble stream for a given volume backscattering strength threshold according to different bubble flow rates and horizontal distance.     

Acoustic monitoring of gas emissions from the seafloor. Part II: a case study from the Sea of Marmara

A rotating, acoustic gas bubble detector, BOB (Bubble OBservatory) module was deployed during two surveys, conducted in 2009 and 2011 respectively, to study the temporal variations of gas emissions from the Marmara seafloor, along the North Anatolian Fault zone. The echosounder mounted on the instrument insonifies an angular sector of 7° during a given duration (of about 1 h). Then it rotates to the next, near-by angular sector and so forth. When the full angular domain is insonified, the “pan and tilt system” rotates back to its initial position, in order to start a new cycle (of about 1 day). The acoustic data reveal that gas emission is not a steady process, with observed temporal variations ranging between a few minutes and 24 h (from one cycle to the other). Echo-integration and inversion performed on the acoustic data as described in the companion paper of Leblond et al. (Mar Geophys Res, 2014), also indicate important variations in, respectively, the target strength and the volumetric flow rates of individual sources. However, the observed temporal variations may not be related to the properties of the gas source only, but reflect possible variations in sea-bottom currents, which could deviate the bubble train towards the neighboring sector. During the 2011 survey, a 4-component ocean bottom seismometer (OBS) was co-located at the seafloor, 59 m away from the BOB module. The acoustic data from our rotating, monitoring system support, but do not provide undisputable evidence to confirm, the hypothesis formulated by Tary et al. (2012), that the short-duration, non-seismic micro-events recorded by the OBS are likely produced by gas-related processes within the near seabed sediments. Hence, the use of a multibeam echosounder, or of several split beam echosounders should be preferred to rotating systems, for future experiments.     

Temporal changes in the contribution of methane-oxidizing bacteria to the biomass of chironomid larvae determined using stable carbon isotopes and ancient DNA

Freshwater lakes are important sources of methane (CH₄) emissions, by organic matter degradation under anaerobic conditions (methanogenesis). Previous studies suggest that lakes contribute up to 16 % of natural emissions. About 60 % of the CH₄ produced is used as an energy source by methane-oxidizing bacteria (MOB—methanotrophs), which could support higher trophic levels, especially Chironomidae (Diptera). Because biogenic methane has a very low stable carbon isotope value, evidence of methane-derived organic-matter assimilation can be tracked by stable carbon isotope analysis in consumers such as chironomids. In some cases, however, chironomid δ¹³C values are not low enough to unambiguously demonstrate methanotroph assimilation and an alternative line of evidence is required. Analysis of ancient DNA (aDNA) from the methanotroph community preserved in lake sediment provides reliable information about past methane oxidation in freshwater lakes. A combination of these two approaches was used to study a sediment core from the deepest zone of Lake Narlay (Jura, France), which covers the last 1,500 years of sediment accumulation. Results show a significant change ca. AD 1600, with an increase in the proportion of MOB in the total bacteria community, and a decrease in chironomid head-capsule δ¹³C. These trends suggest assimilation of MOB by chironomid larvae, and account for up to 36 % of the chironomid biomass. The data also provide information about the feeding behavior of chironomids, with evidence for preferential assimilation of methanotroph type I and the NC10 phylum. The combination of aDNA analysis and carbon stable isotopes strengthens the reliability of inferences about carbon sources incorporated into chironomid biomass.     

Crustal‐scale fluid flow during the tectonic evolution of the Bighorn Basin (Wyoming,USA)

Stable isotope measurements (O, C, Sr), microthermometry and salinity measurements of fluid inclusions from different fracture populations in several anticlines of the Sevier‐Laramide Bighorn basin (Wyoming, USA) were used to unravel the palaeohydrological evolution. New data on the microstructural setting were used to complement previous studies and refine the fracture sequence at basin scale. The latter provides the framework and timing of fluid migration events across the basin during the Sevier and Laramide orogenic phases. Since the Sevier tectonic loading of the foreland basin until its later involvement into the Laramide thick‐skinned orogeny, three main fracture sets (out of seven) were found to have efficiently enhanced the hydraulic permeability of the sedimentary cover rocks. These pulses of fluid are attested by calcite crystals precipitated in veins from hydrothermal (T > 120 °C) radiogenic fluids derived from Cretaceous meteoric fluids that interacted with the Precambrian basement rocks. Between these events, vein calcite precipitated from formational fluids at chemical and thermal equilibrium with surrounding environment. At basin scale, the earliest hydrothermal pulse is documented in the western part of the basin during forebulge flexuring and the second one is documented in basement‐cored folds during folding. In addition to this East/West diachronic opening of the cover rocks to hydrothermal pulses probably controlled by the tectonic style, a decrease in ^87/86Sr values from West to East suggests a crustal‐scale partially squeegee‐type eastward fluid migration in both basement and cover rocks since the early phase of the Sevier contraction. The interpretation of palaeofluid system at basin scale also implies that joints developed under an extensional stress regime are better vertical drains than joints developed under strike‐slip regime and enabled migration of basement‐derived hydrothermal fluids.     

Skill assessment of three earth system models with common marine biogeochemistry

We have assessed the ability of a common ocean biogeochemical model, PISCES, to match relevant modern data fields across a range of ocean circulation fields from three distinct Earth system models: IPSL-CM4-LOOP, IPSL-CM5A-LR and CNRM-CM5.1. The first of these Earth system models has contributed to the IPCC 4th assessment report, while the latter two are contributing to the ongoing IPCC 5th assessment report. These models differ with respect to their atmospheric component, ocean subgrid-scale physics and resolution. The simulated vertical distribution of biogeochemical tracers suffer from biases in ocean circulation and a poor representation of the sinking fluxes of matter. Nevertheless, differences between upper and deep ocean model skills significantly point to changes in the underlying model representations of ocean circulation. IPSL-CM5A-LR and CNRM-CM5.1 poorly represent deep-ocean circulation compared to IPSL-CM4-LOOP degrading the vertical distribution of biogeochemical tracers. However, their representations of surface wind, wind stress, mixed-layer depth and geostrophic circulations (e.g., Antarctic Circumpolar Current) have been improved compared to IPSL-CM4-LOOP. These improvements result in a better representation of large-scale structure of biogeochemical fields in the upper ocean. In particular, a deepening of 20–40 m of the summer mixed-layer depth allows to capture the 0–0.5 μgChl L^?1 concentrations class of surface chlorophyll in the Southern Ocean. Further improvements in the representation of the ocean mixed-layer and deep-ocean ventilation are needed for the next generations of models development to better simulate marine biogeochemistry. In order to better constrain ocean dynamics, we suggest that biogeochemical or passive tracer modules should be used routinely for both model development and model intercomparisons.     

Impact of the LMDZ atmospheric grid configuration on the climate and sensitivity of the IPSL-CM5A coupled model

The IPSL-CM5A climate model was used to perform a large number of control, historical and climate change simulations in the frame of CMIP5. The refined horizontal and vertical grid of the atmospheric component, LMDZ, constitutes a major difference compared to the previous IPSL-CM4 version used for CMIP3. From imposed-SST (Sea Surface Temperature) and coupled numerical experiments, we systematically analyze the impact of the horizontal and vertical grid resolution on the simulated climate. The refinement of the horizontal grid results in a systematic reduction of major biases in the mean tropospheric structures and SST. The mid-latitude jets, located too close to the equator with the coarsest grids, move poleward. This robust feature, is accompanied by a drying at mid-latitudes and a reduction of cold biases in mid-latitudes relative to the equator. The model was also extended to the stratosphere by increasing the number of layers on the vertical from 19 to 39 (15 in the stratosphere) and adding relevant parameterizations. The 39-layer version captures the dominant modes of the stratospheric variability and exhibits stratospheric sudden warmings. Changing either the vertical or horizontal resolution modifies the global energy balance in imposed-SST simulations by typically several W/m² which translates in the coupled atmosphere-ocean simulations into a different global-mean SST. The sensitivity is of about 1.2 K per 1 W/m² when varying the horizontal grid. A re-tuning of model parameters was thus required to restore this energy balance in the imposed-SST simulations and reduce the biases in the simulated mean surface temperature and, to some extent, latitudinal SST variations in the coupled experiments for the modern climate. The tuning hardly compensates, however, for robust biases of the coupled model. Despite the wide range of grid configurations explored and their significant impact on the present-day climate, the climate sensitivity remains essentially unchanged.     

Unbracketing the multiplicity of trauma in North Kivu,Democratic Republic of Congo

As international health organizations have increasingly acknowledged the global burden of psychological trauma, global health experts have sought to appraise and organize the treatment of trauma through objective, neutral forms of classification and calculation. Rather than see trauma as a singular thing whose biological, social and psychological formation is bracketed by expert perspectives, this paper focuses on how psychological trauma is enacted—that is, brought into being and sustained—in particular contexts and practices. If trauma can be made and unmade in practices, rather than assumed to be a stable thing, then these practices become a matter of concern rather than fact for geographers. We take as our empirical focus the province of North Kivu in the eastern Democratic Republic of Congo, where trauma has become a matter of growing local, national and international concern. Working with and beyond the conceptual work of Annemarie Mol, we demonstrate how different ‘versions’ of trauma uneasily co-exist in the region. Interrogating these versions, we explore the tensions that arise from attempting to explain and summate the incidence of trauma that is not singular or stable but is, instead, emergent and enacted in a variety of practices.     

Compressibility of Ca3Al2Si3O12 perovskite up to 55 GPa

Compressibility of perovskite-structured Ca₃Al₂Si₃O₁₂ grossular (GrPv) was investigated at high pressure and high temperature by means of angle-dispersive powder X-ray diffraction using a laser-heated diamond anvil cell. We observed the Pbnm orthorhombic distortion for the pure phase above 50 GPa, whereas below this pressure, Al-bearing CaSiO₃ perovskite coexists with an excess of corundum. GrPv has a bulk modulus (K ₀ = 229 ± 5 GPa; \(K_{0}^{{\prime }}\) fixed to 4) almost similar to that reported for pure CaSiO₃ perovskite. Its unit-cell volume extrapolated to ambient conditions (V ₀ = 187.1 ± 0.4 Å³) is found to be ~2.5 % larger than for the Al-free phase. We observe an increasing unit-cell anisotropy with increasing pressure, which could have implications for the shear properties of Ca-bearing perovskite in cold slabs subducted into the Earth’s mantle.     

Review of solutions for 3D hydrodynamic modeling applied to aquaculture in South Pacific atoll lagoons

A workshop organized in French Polynesia in November 2004 allowed reviewing the current methods to model the three-dimensional hydrodynamic circulation in semi-enclosed atoll lagoons for aquaculture applications. Mollusk (e.g. pearl oyster, clam) aquaculture is a major source of income for South Pacific countries such as French Polynesia or Cook Islands. This aquaculture now requires a better understanding of circulation patterns to improve the spatial use of the lagoons, especially to define the best area to set larvae collectors. The pelagic larval duration of the relevant species (<20 days) and the size of the semi-closed lagoons (few hundreds of km2) drive the specifications of the model in terms of the spatial and temporal scale. It is considered that, in contrast with fish, mollusk larvae movements are limited and that their cycle occurs completely in the lagoon, without an oceanic stage. Atolls where aquaculture is productive are generally well-bounded, or semi-closed, without significant large and deep openings to the ocean. Nevertheless part of the lagoon circulation is driven by oceanic water inputs through the rim, ocean swells, tides and winds. Therefore, boundary conditions of the lagoon system are defined by the spatial structure of a very shallow rim (exposition and number of hoas), the deep ocean swell climate, tides and wind regimes. To obtain a realistic 3D numerical model of lagoon circulation with adequate forcing, it is thus necessary to connect in an interdisciplinary way a variety of methods (models, remote sensing and in situ data collection) to accurately represent the different components of the lagoon system and its specific boundary conditions. We review here the current methods and tools used to address these different components for a hypothetical atoll of the Tuamotu Archipelago (French Polynesia), representative of the semi-closed lagoons of the South Pacific Ocean. We hope this paper will serve as a guide for similar studies elsewhere and we provide guidelines in terms of costs for all the different stages involved.