A technique for calibration of monostatic echosounder systems

A calibration technique has been adapted to render complete system calibrations of high-frequency acoustical instrumentation. This is based on standard targets; specifically, precisely manufactured spheres composed of tungsten carbide with 6% cobalt binder. The use of multiple sphere sizes was found to be advantageous, both as an independent check of the calibrations, and so that resonances in the sphere responses at certain frequencies could be avoided. Complete system gains and beam patterns, which include effects of bandpass filters and finite-pulse lengths, were determined by moving the spheres individually in the transducer far-fields. Use of this procedure ensures control over the acoustical characteristics of transducers, which may change from the time of manufacture and first testing due, for example, to platform mounting. It also provides a direct means of measuring the sampling volume at relatively high and constant signal-to-noise ratios. Implementation of this technique is discussed using a multifrequency sonar system as an example     

Solar radio burst (type III)

This article describes the observations of a type III radio burst observed at 103 MHz simultaneously by the two radio telescopes situated at Rajkot (22.3°N, 70.7°E) and Thaltej (23°N, 72.4°E). This event occurred on September 30, 1993 at about 0430 UT and lasted for only half a minute. The event consisted of several sharp spikes in a group. The rise and fall time of these are comparable, however the peaks of individual spikes varied by a factor of four. The comparison of these observations with the data of solar radio spectrograph HiRAS indicates that this was a metric radio burst giving highest emission at about 103 MHz.     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Measurements of the north polar cap of Mars and the Earth's northern hemisphere ice and snow cover

The boundaries of the polar caps of Mars have been measured on more than 3000 photographs since 1905 from the plate collection at the Lowell Observatory. For the Earth, the polar caps have been accurately mapped only since the mid 1960's when satellites were first available to synoptically view the polar regions. The polar caps of both planets wax and wane in response to changes in the seasons, and interannual differences in polar cap behavior on Mars as well as Earth are intimately linked to global energy balance. Data on the year to year variations in the extent of the north polar caps of Mars and Earth have been assembled and compared, although only 6 years of concurrent data were available for comparison.     

Studying Hydrodynamic Instability Using Shock-Tube Experiments

The hydrodynamic instability, which develops on the contact surface between two fluids, has great importance in astrophysical phenomena such as the inhomogeneous density distribution following a supernova event. In this event acceleration waves pass across a material interface and initiate and enhance unstable conditions in which small perturbations grow dramatically. In the present study, an experimental technique aimed at investigating the above-mentioned hydrodynamic instability is presented. The experimental investigation is based on a shock-tube apparatus by which a shock wave is generated and initiates the instability that develops on the contact surface between two gases. The flexibility of the system enables one to vary the initial shape of the contact surface, the shock-wave Mach number, and the density ratio across the contact surface. Three selected sets of shock-tube experiments are presented in order to demonstrate the system capabilities: (1) large-initial amplitudes with low-Mach-number incident shock waves; (2) small-initial amplitudes with moderate-Mach-number incident shock waves; and (3) shock bubble interaction. In the large-amplitude experiments a reduction of the initial velocity with respect to the linear growth prediction was measured. The results were compared to those predicted by a vorticity-deposition model and to previous experiments with moderate- and high-Mach number incident shock waves that were conducted by others. In this case, a reduction of the initial velocity was noted. However, at late times the growth rate had a 1/t behavior as in the small-amplitude low-Mach number case. In the small-amplitude moderate-Mach number shock experiments a reduction from the impulsive theory was noted at the late stages. The passage of a shock wave through a spherical bubble results in the formation of a vortex ring. Simple dimensional analysis shows that the circulation depends linearly on the speed of sound of the surrounding material and on the initial bubble radius.     

The evolutionary history of early-type galaxies as derived from the fundamental plane

The fundamental plane (FP) scaling relations and their evolution are a powerful tool for studying the global properties of early-type galaxies and their evolutionary history. The form of the FP, as derived by surveys in the local Universe at wavelengths ranging from the U to the K band, cannot be explained by metallicity variations alone among early-type galaxies; systematic variations in age, dark matter content, or homology breaking are required. A large-scale study of early-type galaxies at 0.1 < z < 0.6demonstrates that the SB intercept of the FP, the rest frame (U-V) colour, and the absorption line strengths all evolve passively, thereby implying a high mean formation redshift for the stellar content. The slope of the FP evolves with redshift, which is broadly consistent with systematic age effects occurring along the early-type galaxy sequence. The implication that the least luminous early-type galaxies formed later than the luminous galaxies is discussed in the context of the evolution of thecolour–magnitude relation, the Butcher–Oemler effect and hierarchical galaxy formation models. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mid-infrared observations of methanol maser sites and ultracompact H ii regions: signposts of high-mass star formation

N -band (10.5 μm) and/or Q -band (20.0 μm) images taken with MANIAC on the ESO/MPI 2.2-m telescope are presented for 31 methanol maser sites and 19 ultracompact (UC) H  ii regions. Most of the maser sites and UC H  ii regions are coincident with mid-infrared (MIR) sources to within the positional uncertainties of ∼ 3 arcsec, consistent with the maser emission being powered by the MIR source. The IRAS source positions, however, do not always coincide with the MIR sources.
Based on an average infrared spectral energy distribution, we deduce that the MIR objects are luminous enough that they should also produce a strong ionizing radiation. Some sources are consistent with stars of later spectral type, but not all can be. A number of maser sites show no detectable radio continuum emission associated with MIR emission, despite a powering source luminous enough potentially to produce an UC H  ii region. Since no signs of an UC H  ii region are detected here, these maser sites might be produced during a very early stage of stellar evolution.
We present objects that show evidence of outflow activity stemming from a maser site, exhibiting CO and/or CS line profiles indicative of outflows coincident with the MIR source. These cases are promising examples of maser sites signposting the earliest stages of high-mass star formation.     

Infrared observations of serendipitous hard Chandra X-ray sources

We present observations of a sample of optically faint, hard X-ray sources of the kind likely to be responsible for much of the hard X-ray background. We confirm that such sources are easily detected in the near-infrared, and find that they have a featureless continuum suggesting that the active nucleus is heavily obscured. The infrared colours of the majority of the targets observed are consistent with absorbed elliptical host galaxies at z =1–2. It is likely that we are observing some of the brighter members of the important new class of X-ray type II quasars.     

Three-dimensional coronal structures using clark lake observations

We have undertaken a study of coronal features observed at meter-decameter wavelengths using the Clark Lake radioheliograph. Among the coronal structures we have studied are the radio manifestations of coronal streamers on the solar disk and above the solar limb. We have analyzed the radio data quantitatively, using ray-tracing models for comparison with the maps. Our study provides information about the streamers' three-dimensional shapes, scales, and density profiles, for comparison with related observations using white-light coronagraphs.