Environmental considerations for design of the Athens sea outfall,Saronikos Gulf,greece

The pollution problems in Saronikos Gulf arise mainly from the discharge of about 600,000 m³/day of untreated wastewater into the northern part of this gulf. To alleviate the situation, a new major treatment and sea disposal system is under construction. Its design included various physical oceanographic and marine geological surveys. This article summarizes their results and assesses their impact on the unique design features of the outfall and diffusers.During summer, the stratification at the site of discharge is sufficiently strong to prevent the submerged sewage field from surfacing. This strong summer stratification coupled with the virtual absence of upwelling and the presence of a well-organized current field at the level of effluent trapping (about 40 m) ensures the offshore advection of the diluted submerged wastefield, via either the dominant cyclonic or the rarer anticyclonic circulatory patterns. The sea floor morphology is smooth (except near the Psyttalia coastline where poorly sorted coarse biogenic sands are steeply inclined), and the bottom is covered by an unconsolidated sedimentary layer with a thickness ranging from 10 to 167 cm and consisting in the western part of silty sand and in the eastern part of sandy silt. The seismic data indicated the absence of active faults, valleys, and channels. Below the surficial sediment cover, two seismic units were discerned, which may be correlated with the Quaternary and the Triassic outcrops on the island. The marine geological results indicated that rather minor technical work will be needed for the emplacement of the outfall system.     

Rectangular tank surface aerators: scale up criteria and energy conservation

Surface aeration experiments were conducted in two types of rectangular tanks of aspect ratios i.e., length to width ratio (L/W) of 1.5 and 2 and developed simulation equations to correlate the oxygen transfer coefficient, k and power number, P₀ with a parameter governing theoretical power per unit volume X. The parameter X is defined as equal to F^4/3R^1/3, where F and R are impellers’ Froude and Reynolds numbers respectively). Results have shown that the P₀ can not be simulated singularly with either Reynolds number, R or Froude number, F, which results in scale-effects; there appears to be a need to incorporate the effects of both F and R. It was found that P⁰ is uniquely related to X for rectangular aeration tanks of both aspect ratios, however, such relationships are different depending upon the aspect ratios. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size.     

Geochemistry and Intrusive History of the Ashland Pluton, Klamath Mountains, California and Oregon

The Ashland pluton is a calc-alkaline plutonic complex thatintruded the western Paleozoic and Triassic belt of the KlamathMountains in late Middle Jurassic time. The pluton comprisesa series of compositionally distinct magma pulses. The oldestrocks are hornblende gabbro and two-pyroxene quartz gabbro withinitial ⁸⁷Sr/⁸⁶Sr = 0{dot}7044, ¹⁸O = 8{dot}7%, and REE patternswith chondrite normalized La/Lu = 7. These units were followedby a suite of tonalitic rocks (La_N/Lu_N = 7) and then by a suiteof K₂O- and P₂O₅ rocks of quartz monzodioritic affinity (La_N/Lu_N= 13–21; La_N/Sm_N = 2{dot}4–3{dot}) The quartz monzodioriticrocks were then intruded by biotite granodiorite and granitewith lower REE abundances but more fractionated LREE(La_N/Lu_N= 13–19; La_N/Sm_N = 4{dot}3–6 and they, in turn,were host to dikes and bosses of hornblende diorite. The latestintrusive activity consisted of aplitic and granitic dikes.Combined phase equilibria and mineral composition data, indicateemplacement conditions of approximately P_total = 2{dot}3kb,P_H2O between 1{dot}5 and 2{dot}2 kb, and f_O2 between the nickel-nickeloxide and hematite-magnetite buffers. Successive pulses of magma display increasing SiO₂ togetherwith increasing ¹⁸O and decreasing initial ⁸⁷Sr/⁸⁶Sr. The isotopicdata are consistent with either (1) combined fractional crystallizationof andesitic magma and concurrent assimilation of crustal materialcharacterized by low Sr₁ and high (¹⁸O or, more probably, (2)a series of partial melting events in which sources were successivelyless radiogenic but richer in ¹⁸O Each intrusive stage displaysevidence for some degree of crystal accumulation and/or fractionalcrystallization but neither process adequately accounts fortheir compositional differences. Consequently, each stage appearsto represent a distinct partial melting or assimilation event. The P₂O₅-rich nature of the quartz monzodiorite suite suggestsaccumulation of apatite. However, the suite contains abundantmafic microgranitoid enclaves and most apatite in the suiteis acicular. These observations suggest that magma mixing affectedthe compositional variation of the quartz monzodiorite suite.Mass balance calculations are consistent with a simple mixingprocess in which P₂O₅-rich alkalic basalt magma (representedby the mafic microgranitoid enclaves) was combined with a crystal-poorfelsic magma (represented by the tonalite suite), yielding aquartz monzodioritic magma that then underwent differentiationby crystal fractionation and accumulation.     

Environmental Factors Contributing to the Development and Demise of a Toxic Dinoflagellate (<Emphasis Type="Italic">Karlodinium veneficum</Emphasis>) Bloom in a Shallow,Eutrophic, Lagoonal Estuary

A dense bloom of the ichthyotoxic dinoflagellate Karlodinium veneficum was discovered in the Neuse River Estuary, North Carolina, on 19 October 2006 and was associated with four subsequent fish kills. Microscopic, photopigment, DNA, and toxicological techniques confirmed bloom identity and toxicity. High-resolution spatio-temporal data from ship-board and fixed automated sampling stations provided a unique opportunity to investigate the environmental conditions that initiated, maintained, and terminated the K. veneficum bloom. Bloom initiation and growth were favored by high nutrient availability and reduced dispersal during the period of declining riverine discharge after Tropical Storm Ernesto. K. veneficum out-competed other co-occurring dinoflagellates, perhaps because of the production of karlotoxins that are known to act as grazing deterrents and to facilitate mixotrophic feeding. Once the bloom was established, small-scale hydrodynamic processes, coupled with vertical migration, concentrated cells along a frontal convergence to high densities (>200,000 cells per milliliter). By 26 October 2006, wind mixing and possible nutrient stress disrupted the bloom. Release of cell-bound toxins during the bloom collapse likely accounted for the associated fish kill events where fish were reported as exhibiting typical symptoms of karlotoxin poisoning. The dynamics of this bloom underscore the tight control of harmful algal blooms by meteorological forcing, hydrology, and sediment nutrient input in this shallow lagoonal estuary.     

Why deposits of longitudinal dunes are rarely recognized in the geologic record

Dunes that are morphologically of linear type, many of which are probably of longitudinal type in a morphodynamic sense, are common in modern deserts, but their deposits are rarely identified in aeolian sandstones. One reason for non-recognition of such dunes is that they can migrate laterally when they are not exactly parallel to the long-term sand-transport direction, thereby depositing cross-strata that have unimodal cross-bed dip directions and consequently resemble deposits of transverse dunes. Dune-parallel components of sand transport can be recognized in ancient aeolian sands by examining compound cross-bedding formed by small dunes that migrated across the lee slopes of large dunes and documenting that the small dunes migrated with a component in a preferred along-crest direction over the large dunes.     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.     

Making data useful for modelers to understand complex Earth systems

The Arctic is changing rapidly with dramatic local and global effect. To understand that change requires understanding the Arctic as a system. Models of different processes and at various scales are necessary tools for analyzing and understanding the Earth system. Models are extremely diverse, yet they all require quality data. Through a series of case studies, augmented with ethnographic observation around the International Polar Year, this work examines how modelers assess, acquire, and prepare data for their models. By comparing specific case studies, common themes emerge that can be compared against broader observation. These themes, in turn, suggest data management techniques or requirements for data systems to improve access and use by modelers and generally improve understanding of the Arctic system. The study has an Arctic focus because of the rapid changes occurring in the Arctic, but the approach and results should apply generally to Earth system science. This case study based approach has proven to be a useful method for teasing out both general and specific data needs for different models. An overarching lesson is that greater short-term benefit to modelers and significant gains in efficiency can be achieved by improving the formats, convention, and consistency of the data rather than improved interfaces and analysis tools. A “data-first” philosophy can improve the data systems that support the overall interdisciplinary, integrative science necessary to understand the complex Earth system.     

Chemistry of snow and lake water in Antarctic region

Surface snow and lake water samples were collected at different locations around Indian station at Antarctica, Maitri, during December 2004–March 2005 and December 2006–March 2007. Samples were analyzed for major chemical ions. It is found that average pH value of snow is 6.1. Average pH value of lake water with low chemical content is 6.2 and of lake water with high chemical content is 6.5. The Na⁺ and Cl^? are the most abundantly occurring ions at Antarctica. Considerable amount of SO ₄ ^2? is also found in the surface snow and the lake water which is attributed to the oxidation of DMS produced by marine phytoplankton. Neutralization of acidic components of snow is mainly done by NH ₄ ⁺ and Mg²⁺. The Mg²⁺, Ca²⁺ and K⁺ are nearly equally effective in neutralizing the acidic components in lake water. The NH ₄ ⁺ and SO ₄ ^2? occur over the Antarctica region mostly in the form of (NH₄)₂SO₄.