Deep-water geomorphology of the glaciated Irish margin from high-resolution marine geophysical data

The continental margin offshore of western Ireland offers an opportunity to study the effects of glacial forcing on the morphology and sediment architecture of a mid-latitude margin. High resolution multibeam bathymetry and backscatter data, combined with shallow seismic and TOBI deep-towed side-scan sonar profiles, provide the basis for this study and allow a detailed geomorphological interpretation of the northwest Irish continental margin. Several features, including submarine mass failures, canyon systems and escarpments, are identified in the Rockall Trough for the first time. A new physiographic classification of the Irish margin is proposed and linked to the impact of glaciations along the margin. Correlation of the position and dimensions of moraines on the continental shelf with the level of canyon evolution suggests that the sediment and meltwater delivered by the British–Irish Ice Sheet played a fundamental role in shaping the margin including the upslope development of some of the canyon systems. The glacial influence is also suggested by the variable extent and backscatter signal of sedimentary lobes associated with the canyons. These lobes provide an indirect measurement of the amount of glaciogenic sediment delivered by the ice sheet into the Rockall Trough during the last glacial maximum. None of the sedimentary lobes demonstrates notable relief, indicating that the amount of glaciogenic sediment delivered by the British–Irish Ice Sheet into the Rockall Trough was limited. Their southward disappearance suggests a more restricted BIIS, which did not reach the shelf edge south of 54°23′ N. The various slope styles observed on the Irish margin represent snapshots of the progressive stages of slope development for a glacially-influenced passive margin and may provide a predictive model for the evolution of other such margins.     

Authorship,Collaboration, and Gender: Fifteen Years of Publication Productivity in Selected Geography Journals

In academia, publication productivity, defined as the number of peer-reviewed articles published and the frequency of citations, is a primary factor in the assessment of tenure and promotion. One of the most cited gender differences in academia is the “productivity puzzle,” which suggests that women publish less than men, thereby affecting every aspect of a woman's academic career. Peer-reviewed articles published in the Annals of the Association of American Geographers (Annals) and The Professional Geographer (PG) between 1995 and 2006, and in four subdisciplinary journals between 2005 and 2009, as well as citation reports, were used to explore whether gender differences are present in publication productivity. Gender differences were evident in the proportion of women authors, the frequency of collaboration, and the number of citations across a broad range of prestigious geographic journals. For all journals studied, women were underrepresented, especially in the authorship positions that equate to notions of respect and merit. Although the number of collaborative articles increased during the study period, single-authored papers are the dominant mode of publication for both men and women for most geographic journals. The authorship patterns for frequently cited articles generally mirror those for all articles. Because the frequency of collaborative publication was high for women, the dual trends of a general increase in publication collaboration and increasing participation of women in academic geography bodes well for increased female productivity as it relates to publishing. Nevertheless, it is important to note that, currently, males as lead or single authors represent the predominant voice of geography within the journals examined in this study.     

A loess-paleosol record of climate and glacial history over the past two glacial-interglacial cycles (~ 150 ka), southern Jackson Hole, Wyoming

Loess accumulated on a Bull Lake outwash terrace of Marine Oxygen Isotope Stage 6 (MIS 6) age in southern Jackson Hole, Wyoming. The 9 m section displays eight intervals of loess deposition (Loess 1 to Loess 8, oldest), each followed by soil development. Our age-depth model is constrained by thermoluminescence, meteoric ¹⁰Be accumulation in soils, and cosmogenic ¹⁰Be surface exposure ages. We use particle size, geochemical, mineral-magnetic, and clay mineralogical data to interpret loess sources and pedogenesis. Deposition of MIS 6 loess was followed by a tripartite soil/thin loess complex (Soils 8, 7, and 6) apparently reflecting the large climatic oscillations of MIS 5. Soil 8 (MIS 5e) shows the strongest development. Loess 5 accumulated during a glacial interval (~ 76-69 ka; MIS 4) followed by soil development under conditions wetter and probably colder than present. Deposition of thick Loess 3 (~ 43-51 ka, MIS 3) was followed by soil development comparable with that observed in Soil 1. Loess 1 (MIS 2) accumulated during the Pinedale glaciation and was followed by development of Soil 1 under a semiarid climate. This record of alternating loess deposition and soil development is compatible with the history of Yellowstone vegetation and the glacial flour record from the Sierra Nevada.     

Formation rates of Subantarctic mode water and Antarctic intermediate water within the South Pacific

The formation of Subantarctic Mode Water (SAMW) and Antarctic Intermediate Water (AAIW) significantly contributes to the total uptake and storage of anthropogenic gases, such as CO₂ and chlorofluorocarbons (CFCs), within the world's oceans. SAMW and AAIW formation rates in the South Pacific are quantified based on CFC-12 inventories using hydrographic data from WOCE, CLIVAR, and data collected in the austral winter of 2005. This study documents the first wintertime observations of CFC-11 and CFC-12 saturations with respect to the 2005 atmosphere in the formation region of the southeast Pacific for SAMW and AAIW. SAMW is 94% and 95% saturated for CFC-11 and CFC-12, respectively, and AAIW is 60% saturated for both CFC-11 and CFC-12. SAMW is defined from the Subantarctic Front to the equator between potential densities 26.80-27.06 kg m⁻³, and AAIW is defined from the Polar Front to 20°N between potential densities 27.06-27.40 kg m⁻³. CFC-12 inventories are 16.0×10⁶ moles for SAMW and 8.7×10⁶ moles for AAIW, corresponding to formation rates of 7.3±2.1 Sv for SAMW and 5.8±1.7 Sv for AAIW circulating within the South Pacific. Inter-ocean transports of SAMW from the South Pacific to the South Atlantic are estimated to be 4.4±0.6 Sv. Thus, the total formation of SAMW in the South Pacific is approximately 11.7±2.2 Sv. These formation rates represent the average formation rates over the major period of CFC input, from 1970 to 2005. The CFC-12 inventory maps provide direct evidence for two areas of formation of SAMW, one in the southeast Pacific and one in the central Pacific. Furthermore, eddies in the central Pacific containing high CFC concentrations may contribute to SAMW and to a lesser extent AAIW formation. These CFC-derived rates provide a baseline with which to compare past and future formation rates of SAMW and AAIW.     

Simulated eddy induced vertical velocities in a Gulf of Alaska model

Mesoscale eddies can distribute nutrients, heat and fresh water into the Gulf of Alaska (GOA) from the coastal margins. While many studies have investigated the physical characteristics of GOA eddies, their effects on passive-dispersive particles have not been previously simulated to investigate eddy induced upwelling. A climatologically forced Parallel Ocean Program simulation of the north Pacific Ocean with an online particle tracking scheme was used to simulate passive-dispersive particles in the Gulf of Alaska. In-eddy vertical Lagrangian velocities of the particles were calculated both inside and outside the eddies and showed upwelling rates are generally greater inside the eddies where the vertical velocities of the particles ranged from 0.2 to 0.7 m/day.     

Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

The Young Geographers And Their Research: 1936–1943*

The Young Geographers, an informal organization of American geographers, flourished from 1936 to 1943. One of its projects in 1940 and 1941 was the compilation and publication of lists of contemplated research by some 170 Young Geographers. Their listed research interests were relatively narrow in subject and geographical area. The successor of the Young Geographers was the American Society for Professional Geographers which merged with the Association of American Geographers in 1948 under a democratic constitution which assured that young geographers and their research would be recognized.     

Opening GIScience: A process-based approach

Many scholars have demonstrated growing interest in GIScience in recent years, including use of open data portals, shared code and options for open access publication. These practices have made both research and data more transparent and accessible for a broad audience. This research may be open only in a limited sense for populations without expertise in the technology and methods undergirding these data. Based on two case studies using RStudio’s Shiny web platform, we argue that a process-based approach focusing on how analysis is opened throughout the research process provides a supplementary way to define and reflect upon public facing geographic research. Reflecting upon decisions we made at key points in each case study project, we identify four key tensions inherent to work in open GIScience: standardized vs. flexible tools, expert vs. community-led design, single vs. multiple audiences and established vs. emerging metrics.