超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析,矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物,且经历了较深程度的氧化蚀变,大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中;这些硫化物相以白铁矿为主,其次是等轴古巴矿和少量铜蓝,缺乏黄铁矿、闪锌矿。据推断,该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应,地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%）,Cu含量次之（0.16%~7.24%）,而Zn含量普遍较低（0.01%~0.11%）;微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似,明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。     

水下航行体双空泡相互作用数值模拟研究

高速水下航行体头肩部和表面突起等位置很容易产生空泡,不失一般性,将表面突起结构简化为一定高度的台阶.针对简化的航行体模型,基于数值模拟方法研究了头肩部空泡与台阶处空泡、头肩部空泡与尾空泡2种类型的双空泡相互作用问题.不同的来流攻角下,头肩部空泡与台阶处空泡的作用过程存在区别,可以分为大攻角和小攻角2种类型.当尾空泡内有...     

情境教学的课堂评价与教学改进研究——以“资源枯竭型城市的发展方向”为例

情境教学是培养学生核心素养的重要教学方法,本文提出了情境教学的课堂评价原则:情境具有真实性、情境与教学目标具有关联性、情境应划分水平。同时提出从情境的结构和关系、解决情境中的问题所涉及地理要素的数量及其关联程度两个角度分别对情境水平进行划分,并结合“资源枯竭型城市的发展方向”课例,提出目前情境教学中存在的问题及教学改进建议。     

西藏甲玛铜多金属矿床深部斑岩矿体找矿突破及其意义

甲玛铜多金属矿是西藏冈底斯成矿带中东段勘查程度最高、成矿元素与矿体类型复杂的超大型斑岩-矽卡岩型矿床。通过4年多、近350 个钻孔的验证,不仅实现了矽卡岩矿体的找矿突破,同时在0-40线深部发现了产于二长花岗斑岩与石英闪长玢岩中的斑岩钼（铜）矿体,建立了“四位一体”的找矿勘查模式。斑岩矿体赋存标高一般处于4 600 m以下,矿体走向NW-SE,倾向NE,近直立,矿体垂向延伸大于350 m;斑岩矿石以发育细脉-浸染状、网脉状构造为特征;矿石中的矿石矿物主要为黄铜矿与辉钼矿,少见斑铜矿;脉石矿物主要为石英。初步查明:与铜矿化有关的含矿岩体主要为偏中性的石英闪长玢岩,蚀变以典型的细粒热液黑云母交代角闪石斑晶和基质而成的黑云母化蚀变为主;与钼矿化有关的含矿岩体主要为二长花岗斑岩,蚀变以硅化为主,次为绿帘石化、泥化和钾化。斑岩体与碳酸盐岩接触带常产出厚度超过200 m的巨厚矽卡岩矿体,且在岩体一侧有内矽卡岩产出。甲玛深部斑岩矿体的发现不仅证实了“斑岩-矽卡岩型”的矿床成因观点,而且完善了甲玛矿床成矿模式与勘查模型。     

A fine-granularity scheduling algorithm for parallel XDraw viewshed analysis

Viewshed analysis is widely used in many terrain applications such as siting problem, path planning problem, and etc. But viewshed computation is very time-consuming, in particular for applications with large-scale terrain data. Parallel computing as a mainstream technique with the tremendous potential has been introduced to enhance the computation performance of viewshed analysis. This paper presents a revised parallel viewshed computation approach based on the existing serial XDraw algorithm in a distributed parallel computing environment. A layered data-dependent model for processing data dependency in the XDraw algorithm is built to explore scheduling strategy so that a fine-granularity scheduling strategy on the process-level and thread-level parallel computing model can be accepted to improve the efficiency of the viewshed computation. And a parallel computing algorithm, XDraw-L, is designed and implemented taken into account this scheduling strategy. The experimental results demonstrate a distinct improvement of computation performance of the XDraw-L algorithm in this paper compared with the coarse-partition algorithm, like XDraw-E which is presented by Song et al. (Earth Sci Inf 10(5):511–523, 2016), and XDraw-B that is the basic algorithm of serial XDraw. Our fine-granularity scheduling algorithm can greatly improve the scheduling performance of the grid cells between the layers within a triangle region.     

Geochronology,Geochemistry and Petrogenesis of the Pungco Ophiolite,TibetEI北大核心CSCD

Although the middle section of the Bangong-Nujiang suture zone has been intensively investigated, its tectonic framework and evolution is still controversy. The Pungco ophiolite has a relative complete ophiolitic complex, which is an ideal specimen for studying this tricky problem. LA-ICP-MS U-Pb dating of zircons from the diabasic rock yielded an age of 159.0±2.1 Ma. This age suggests that the Pungco ophiolite was formed in the Late Jurassic, indicating the development of the Late Jurassic ophiolite in the third ophiolitic subzone. The whole-rock major and trace element compositions of diabasic and basaltic rocks exhibit mixed arc and N-MORB geochemical characteristics. Two diabasic samples have (87Sr/86Sr)i values of 0.7055 and 0.7063 and εNd(t) values of 11.28 and 11.84, respectively. The geochemical signatures and formation age of the Pungco ophiolite suggest that this ophiolite was probably produced in an active continental fore-arc setting. It originated from a N-MORB-like depleted mantle source with the involvement of subducted-slab fluids. Considering the regional geological background, the Pungco ophiolite was likely generated during the southward subduction of the Bangong-Nujiang Tethyan oceanic lithosphere beneath the Lhasa terrane, and belongs to a regional archipelagic arc-basin system together with the other Early Jurassic-Early Cretaceous ophiolites from the northern Tibet Lake district. © 2018, Science Press. All right reserved.     

南海北部西沙海槽沉积物管状黄铁矿特征及其形成机理*

南海北部西沙海槽S1站位的岩心柱沉积物中广泛发育自生矿物黄铁矿,其形态以管状为主,且具有内部中空的圈层结构。使用扫描电镜、电子探针、LA-ICP-MS、SIMS等测试方法研究了管状黄铁矿的形态及圈层结构,结果显示: (1)管状黄铁矿发育内部中空的圈层结构,其中内圈层(I_py)由莓球状黄铁矿呈五角十二面体紧密堆积组成,外圈层(O_py)由晶形较好晶粒较大的八面体黄铁矿组成,并混有沉积碎屑及钙质生物壳体;(2)内圈层和外圈层分别呈现出贫S富Fe和富S贫Fe的特征,其成因是甲烷渗漏造成的局部还原环境使得As进入黄铁矿中导致晶格空缺或被扭曲,从而促进Ni、Co、Cu、Zn、Pb等微量元素的掺入;(3)内圈层、外圈层发生了明显的硫同位素分馏现象,内圈层中 δ³⁴S 平均为-37.8‰,外圈层中 δ³⁴S 平均为-29.3‰。研究认为,管状黄铁矿作为曾经甲烷渗漏的通道,其生长机制可分为3个阶段: (1)气水通道形成阶段: 向上运移的甲烷流体在沉积物孔隙中逐渐形成气水通道;(2)外圈层形成阶段: 当向上运移的甲烷与硫酸盐发生甲烷厌氧氧化时,逐渐形成晶体较大、晶形较好的八面体黄铁矿外圈层;(3)内圈层形成阶段: 随着甲烷浓度逐渐降低,在气水通道中的微生物作用下,剩余甲烷与向下运移的硫酸盐继续反应形成莓球状黄铁矿内圈层。因此,南海北部的泥岩中大量发育的管状黄铁矿常常与地层中甲烷水合物的存在有关。     

Geochemical characterization of Archaean amphibolites from the eastern part of Anshan–Benxi iron producing area,northeastern China: implication for tectonic setting of BIFs

The Anshan–Benxi iron producing area, which is located at the northeastern margin of the North China Craton, is the main distribution area of Archaean BIFs in China. In their eastern part, including the Gongchangling and Waitoushan deposits, BIFs mainly are hosted in the Archaean middle Anshan Group. Amphibolites are widely distributed in the iron‐bearing rock series, reflecting the tectonic setting of BIFs. Amphibolites not only have MORB‐like compositional characteristics, but also have island arc‐like ones, and they are consistent with back‐arc basin basalts (BABB). In the study area, the protolith of amphibolites belongs to Okinawa‐type BABB; it indicates that tectonic setting of BIFs is the intra‐continental back‐arc basin. In the study area, the formation of sedimentary basins for BIFs had been associated with oceanic plate subduction. Amphibolites from Gongchangling deposit are characterized by relative enrichments in LILE and LREE, and depletions in HFSE. This indicates that they had a relatively large influence of subduction in their formation. Amphibolites from Waitoushan deposit are characterized by relative enrichments in LILE without conspicuous depletions in HFSE, indicating relatively low subduction rates. Copyright © 2015 John Wiley & Sons, Ltd.     

Landslide susceptibility mapping using LiDAR and DMC data: a case study in the Three Gorges area, China

The objective of this study is to map landslide susceptibility in Zigui segment of the Yangtze Three Gorges area that is known as one of the most landslide-prone areas in China by using data from light detection and ranging (LiDAR) and digital mapping camera (DMC). The likelihood ratio (LR) and logistic regression model (LRM) were used in this study. The work is divided into three phases. The first phase consists of data processing and analysis. In this phase, LiDAR and DMC data and geological maps were processed, and the landslide-controlling factors were derived such as landslide density, digital elevation model (DEM), slope angle, aspect, lithology, land use and distance from drainage. Among these, the landslide inventories, land use and drainage were constructed with both LiDAR and DMC data; DEM, slope angle and aspect were constructed with LiDAR data; lithology was taken from the 1:250,000 scale geological maps. The second phase is the logistic regression analysis. In this phase, the LR was applied to find the correlation between the landslide locations and the landslide-controlling factors, whereas the LRM was used to predict the occurrence of landslides based on six factors. To calculate the coefficients of LRM, 13,290,553 pixels was used, 29.5 % of the total pixels. The logical regression coefficients of landslide-controlling factors were obtained by logical regression analysis with SPSS 17.0 software. The accuracy of the LRM was 88.8 % on the whole. The third phase is landslide susceptibility mapping and verification. The mapping result was verified using the landslide location data, and 64.4 % landslide pixels distributed in “extremely high” zone and “high” zone; in addition, verification was performed using a success rate curve. The verification result show clearly that landslide susceptibility zones were in close agreement with actual landslide areas in the field. It is also shown that the factors that were applied in this study are appropriate; lithology, elevation and distance from drainage are primary factors for the landslide susceptibility mapping in the area, while slope angle, aspect and land use are secondary.     

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.