Cretaceous stratigraphy and palaeoenvironments of the Southern Petén Basin, Guatemala

The Cretaceous deposits of the Southern Petén Basin, an oil-producing province, are located to the south of the Yucatan Platform and to the east of the Chiapas Carbonate Platform of Mexico. The succession in the southern part of this basin has been studied both in wells and at outcrop by microfacies analysis. It is composed of 5000 m of shallow marine carbonates and evaporites with a few thin layers of pelagic limestones rich in organic carbon and planktic foraminifera deposited during peak transgressions or maximum flooding. The sedimentation of this thick succession was not continuous, and the section is punctuated by subaerial erosional bounding surfaces and a single hardground which marks the final drowning of the carbonate platform during the late Maastrichtian. New age determinations have been obtained on the basis of planktic and benthic foraminifera from the Aptian to Santonian Cobán Formation, D, C, B and A Members. Cobán C (Albian) and B (Cenomanian) Members are the present oil reservoirs. The rudist and alveolinid limestones of late Campanian and Maastrichtian age referred to the Campur Formation in the Southern Petén Basin are here reassigned to the Angostura Formation, as recognized in the Chiapas area. The Actela Formation is defined here to encompass the limestone breccia deposits that occur at the Cretaceous–Tertiary boundary and extend into the Parvularugoglobigerina eugubina Zone of early Danian age. The D, C, B and A Members of the Cobán Formation and the Angostura Formation represent second order transgressive and regressive trends in a passive margin area where the deposits indicate a succession of various environments, including fluviatile, salinas, shallow marine carbonate platform, outer shelf and intrashelf basin. High subsidence rates, sea-level changes and tectonic uplift controlled the sedimentation.

Abstract

Les formations crétacées du sud-est du Bassin du Petén, région pétrolière du nord du Guatemala, sont situées au Sud du Yucatan et à l'Est du Chiapas au Mexique. Ces sédiments ont été étudiés à la fois dans deux puits et à l'affleurement par l'analyse des microfaciès. Cet ensemble sédimentaire est composé de 5000 m de carbonates de plate-forme de faible profondeur et d'évaporites, dans lesquels s'intercalent de minces couches de calcaires pélagiques riches en matière organique et en foraminifères planctoniques. Ces calcaires pélagiques se sont déposés lors des maximums de transgressions. La sédimentation de cette épaisse série n'est pas continue et est ponctuée par quelques surfaces d'érosion sub-aérienne et une surface durcie qui souligne l'ennoyage définitif de la plate-forme carbonatée au Maastrichtien terminal. De nouvelles datations ont été obtenues sur la formation Cobán et ses membres D, C, B et A qui s'étagent de l'Aptien au Santonien. Les membres C (albien) et B (cénomanien) constituent les réservoirs productifs. Les calcaires à rudistes et à alveolinidés du Campanien supérieur–Maastrichtien ont été appelés à tort au Petén formation Campur. Ils doivent, selon nous, être attribués à la formation Angostura comme au Chiapas voisin, où affleurent des faciès comparables et de même âge. Une nouvelle formation est créée (formation Actela) pour les brèches calcaires de la limite Crétacé–Tertiaire et de la Zone à Eugubina du Danien inférieur. Les membres D, C, B, A de la formation Cobán et la formation Angostura représentent des cycles transgressifs–régressifs de deuxième ordre. Sur cette marge passive du Petén, les dépôts correspondent à des environnements variés comme des terres émergées soumises à une altération karstique et à des dépôts fluviatiles, des salinas, des plates-formes carbonatées marines, des shelf externes et des bassins intra plate-forme. La sédimentation a été, ici, contrôlée par une forte vitesse de subsidence, les variations du niveau marin et des soulèvements tectoniques.     

Analyzing ice dynamics using Sentinel-1 data at the Solheimajoküll Glacier,Iceland

ABSTRACT

The climate in southern Iceland has warmed over the last 70 years, resulting in accelerated glacier dynamics at the Solheimajoküll glacier. In this study, we compare glacier terminus locations from 1973 to 2018, to changes in climate across the study area, and we derive ice-surface velocities (2015–2018) from satellite remote-sensing imagery (Sentinel-1) using the offset-tracking method. There have been two regional temperature trends in the study period: cooling (1973–1979) and warming (1980–2018). Our results indicate a time lag of about 20 years between the onset of glacier retreat (?53 m/year since 2000) and the inception of the warming period. Seasonally, the velocity time series suggest acceleration during the summer melt season since 2016, whereas glacier velocities during accumulation months were constant. The highest velocities were observed at high elevations where the ice-surface slope is the steepest. We tested several scenarios to assess the hydrological time response to glacier accelerations, with the highest correlations being found between one and 30 days after the velocity estimates. Monthly correlation analyses indicated inter-annual and intra-annual variability in the glacier dynamics. Additionally, we investigate the linkage between glacier velocities and meltwater outflow parameters as they provide useful information about internal processes in the glacier. Velocity estimates positively correlate with water level and negatively correlate with water conductivity between April and August. There is also a disruption in the correlation trend between water conductivity and ice velocity in June, potentially due to a seasonal release of geothermal water.     

Mode Identification from Line Profiles using the Direct Fitting Technique

The method of moments and the direct fitting method are the onlyspectroscopic methods of mode identification which allow a determination ofall pulsational parameters. The pulsation parameters are required to predictthe light amplitude and phase which can be important discriminants in modeidentification. The direct fitting method has several advantages over themethod of moments. It is not restricted to low spherical harmonic degree or form of the eigenfunction and is not sensitive to the placement of the continuum. In the last few years the method has been applied to several different types of stars. We briefly describe the method and give someexamples of its application.     

CFD simulation of airflow over a regular array of cubes. Part II: analysis of spatial average properties

In the first part of this study, results of a computational fluid dynamics simulation over an array of cubes have been validated against a set of wind-tunnel measurements. In Part II, such numerical results are used to investigate spatially-averaged properties of the flow and passive tracer dispersion that are of interest for high resolution urban mesoscale modelling (e.g. non resolved obstacle approaches). The results show that vertical profiles of mean horizontal wind are linear within the canopy and logarithmic above. The drag coefficient, derived from the numerical results using the classical formula for the drag force, is height dependent (it decreases with height). However, a modification of the formula is proposed (accounting for subgrid velocity scales) that makes the drag coefficient constant with height. Results also show that the dispersive fluxes are similar in magnitude to the turbulent fluxes, and that they play a very important role within the canopy. Vertical profiles of turbulent length scales (to be used in k–l closure schemes, where k is the turbulent kinetic energy and l a turbulent length scale) are also derived. Finally the distribution of the values around the mean over the reference volumes are analysed for wind and tracer concentrations.     

The Würm in NW Iberia, a pollen record from Area Longa (Galicia)

The pollen record at Area Longa is the westernmost sequence available for investigation of the last glaciation in continental Europe. It is located in a region, NW Iberia, for which data from times earlier than the late glacial period are scarce. It comprises a series of exposed limnetic levels that lie above an Eemian (Oxygen Isotope Stage [OIS] 5e) beach and are separated by inorganic layers. The oldest limnetic level (Level I), attributed to the early glacial period (OIS 5a to OIS 5d), shows a dominance of woodland with high proportions of Fagus pollen and is tentatively identified with St. Germain I. The lower pleniglacial (OIS 4) Level II records a stadial landscape of grassland and shrub. Level III, from the pleniglacial interstade (OIS 3), reflects a complex period in which three warmer woodland phases alternated with periods of more open vegetation. This cyclical behavior correlates with the ice core isotope record and with the general tendencies observed in other Würmian pollen records, but the composition of our pollen profiles differs from those observed in these other records. In NW Iberia, the dominant trees were deciduous taxa, not conifers. Of particular note is the presence of lowland Fagus woodlands during the pre-Würm, and the occurrence of Carpinus considerably farther west than the boundary of its current distribution in the Iberian Peninsula.     

The energy balance experiment EBEX-2000. Part II: Intercomparison of eddy-covariance sensors and post-field data processing methods

The eddy-covariance method is the primary way of measuring turbulent fluxes directly. Many investigators have found that these flux measurements often do not satisfy a fundamental criterion—closure of the surface energy balance. This study investigates to what extent the eddy-covariance measurement technology can be made responsible for this deficiency, in particular the effects of instrumentation or of the post-field data processing. Therefore, current eddy-covariance sensors and several post-field data processing methods were compared. The differences in methodology resulted in deviations of 10% for the sensible heat flux and of 15% for the latent heat flux for an averaging time of 30 min. These disparities were mostly due to different sensor separation corrections and a linear detrending of the data. The impact of different instrumentation on the resulting heat flux estimates was significantly higher. Large deviations from the reference system of up to 50% were found for some sensor combinations. However, very good measurement quality was found for a CSAT3 sonic together with a KH20 krypton hygrometer and also for a UW sonic together with a KH20. If these systems are well calibrated and maintained, an accuracy of better than 5% can be achieved for 30-min values of sensible and latent heat flux measurements. The results from the sonic anemometers Gill Solent-HS, ATI-K, Metek USA-1, and R.M. Young 81000 showed more or less larger deviations from the reference system. The LI-COR LI-7500 open-path H₂O/CO₂ gas analyser in the test was one of the first serial numbers of this sensor type and had technical problems regarding direct solar radiation sensitivity and signal delay. These problems are known by the manufacturer and improvements of the sensor have since been made. The National Center for Atmospheric Research is supported by the National Science Foundation.     

Large scale studies of the surroundings of GRS 1915+105

We have carried out radio studies of the surroundings of the superluminal microquasar GRS 1915+105. Our main goal was to understand the possible relation of GRS 1915+105 with two infrared/radio sources that appear symmetrically located with respect to GRS 1915+105 and aligned with the position angle of the relativistic ejecta. We have also studied a nearby supernova remnant to test if the event that created the remnant could have been the progenitor of this hard X-ray binary.     

Coda Q before and after the eruptions of 13 November 1985, and 1 September 1989, at Nevado del Ruiz Volcano, Colombia

 Coda Q^–1 was calculated at Nevado del Ruiz Volcano (NRV) before and after two phreatomagmatic eruptions (November 1985, September 1989) and for a period of stability (May 1987) using a functional form for coda derived from a single scattering model (Sato 1977). Substantial changes were found before and after the eruptions. The highest value of Q^–1 was found during the November 1985 eruption, an intermediate value for the September 1989 eruption, and the lowest value for May 1987. It seems that the changes in coda Q^–1 at NRV have a still-unknown relationship with the volume or magnitude of the eruption. A relatively strong frequency dependence was found for all periods. Also Q^–1 clearly changed with time, suggesting that the scattering was strong for the eruption of November 1985 and decreased for the eruption of September 1989, and that the intrinsic absorption probably increased. This suggests the possibility that crystallization is taking place in the NRV magma. The clear change of coda Q^–1 before and after the eruptions at NRV also suggests the possibility that coda Q^–1 is a premonitory tool of activity at this volcano. Received: 25 October 1996 / Accepted: 21 January 1998     

Sequence stratigraphy of Holocene incised-valley fills and coastal evolution in the Gulf of Cádiz (southern Spain)

This first sedimentary interpretation of two incised-valley fills in the Gulf of Cádiz (southern Spain), which accumulated during the last fourth-order eustatic cycle in response to fluvial incision, changes of sea level, and correlative deposition, relates the filling of the estuarine basins and their barriers with four regional progradation phases, H₁ to H₄. The cases studied are the wave-dominated Guadalete, and the mixed, tide and wave-dominated Odiel-Tinto estuaries. The sequence boundary is a type-1 surface produced during the lowstand of the Last Glacial period ca. 18 000 ¹⁴C yr BP. No fluvial lowstand deposits were found in the area. Due to rapid transgression the valley fills consist of transgressive and highstand sediments. The maximum landward advance of the estuarine barriers occurred ca. 6500–6000 ¹⁴C yr BP during the maximum of the Flandrian transgression, but there is no evidence of sea level rising appreciably above the present. A large part of the estuaries was filled during H₁ (ca. 6500–4400 ¹⁴C yr BP) but ravinement by shifting tidal inlets destroyed most of the coeval barriers. During the H₂ phase (ca. 4200–2550 ¹⁴C yr BP) sedimentation was favoured by arid conditions and concentrated in the axial estuarine zones and the barriers. Between H₂ and H₃ prevailing winds changed from W to WSW, increasing spit growth to the east and south-east. Progradation of bay-head deltas and flood-plains during H₃ (ca. 2300–800 ¹⁴C yr BP) and H₄ (500 yr ago to the present) further reduced the accommodation space in the largely-filled valleys, and sediment by-passed the estuaries and accumulated in the estuarine barriers as fast-growing spits. Arid conditions and increasing human activity have caused rapid coastal modifications.     

Orbit classification in arbitrary 2D and 3D potentials

A method of classifying generic orbits in arbitrary 2D and 3D potentials is presented. It is based on the concept of spectral dynamics introduced by Binney &38; Spergel that uses the Fourier transform of the time series of each coordinate. The method is tested using a number of potentials previously studied in the literature and is shown to distinguish correctly between regular and irregular orbits, to identify the various families of regular orbits (boxes, loops, tubes, boxlets, etc.), and to recognize the second-rank resonances that bifurcate from them. The method returns the position of the potential centre and, for 2D potentials, the orientation of the principal axes as well, should this be unknown. A further advantage of the method is that it has been encoded in a FORTRAN program that does not require user intervention, except for 'fine tuning' of search parameters that define the numerical limits of the code. The automatic character makes the program suitable for classifying large numbers of orbits.