The relevance of energy damping in unreinforced masonry rocking mechanisms. Experimental and analytic investigations

Existing unreinforced masonry buildings frequently suffer out-of-plane local collapse mechanisms when undergoing earthquake ground motion. The energy damping that occurs during the motion, due to impacts of a wall against the foundation or against other walls, is a relevant parameter on the response. An experimental investigation has been carried out to estimate the dissipation of kinetic energy that takes place during free oscillations. Restraint conditions allow for two-sided rocking (wall resting on a foundation) and one-sided rocking (wall resting on a foundation adjacent to transverse walls). Five specimens have been tested, modelling walls acted out-of-plane (fa?ades). When one-sided rocking is under consideration, different depths of the contact surface between fa?ade and transverse walls are considered. In the case of two-sided rocking, the experimental coefficient of restitution is slightly lower than the analytic coefficient. In the case of one-sided rocking, an analytic formulation is proposed and this is compared against experimental data. Although the coefficient of restitution of one-sided rocking is less than half that of two-sided rocking, it is not equal to zero. Thus, it cannot induce a sudden stop of the motion. Hence, nonlinear time history analyses performed under this assumption may prove unsafe. Moreover, a comparison has been carried out between overturning maps, induced by twenty natural accelerograms, computed for the analytic coefficient of restitution and those computed for the experimental coefficient of restitution. The increased energy dissipation reduces the frequency of overturning and causes a more regular behaviour.     

Variation of human perceptiveness of earthquakes during seismic sequences

This paper describes the variation of the human perception of earthquakes under the peculiar condition of seismic sequence occurrence. To this aim, we chose and have analyzed four seismic sequences that reflect the most common models of seismicity occurrence in the Italian territory. Our data always refer to the epicentral area, so that the contribution of the epicentral distance to the earthquake sensitiveness is considered constant. To search for recurrent behavior of people in the perception of earthquakes, we crossed seismological data to sensitivity data coming from the archives of the Italian Civil Protection. In each sequence, we individuate a number of “indicators”, such as the rate between felt and not-felt events and the minimum magnitude for which 100% of the events are felt. Such indicators are proportional to the energy released by the sequence and can be particularly affected by the time protraction of the sequence, and/or by the different familiarity with the seismic phenomenon, and/or by the intensity of the emotional impact of a seismic crisis. The observed trends of sensitiveness show a significant variation of the people perceptivity within the sequence development. From the analysis of the dataset, one can distinguish the variation of perceptivity due to emotional factors from those due to physical factors. An important observation, which is confirmed by a statistical analysis, is that the source depth does not affect the perceptiveness of earthquakes. Finally, we find important differences between on-sequence and off-sequence human perceptiveness that are connected with the different levels of alert.     

Lava effusion rates from hand-held thermal infrared imagery: an example from the June 2003 effusive activity at Stromboli

A safe, easy and rapid method to calculate lava effusion rates using hand-held thermal image data was developed during June 2003 at Stromboli Volcano (Italy). We used a Forward Looking Infrared Radiometer (FLIR) to obtain images of the active lava flow field on a daily basis between May 31 and June 16, 2003. During this time the flow field geometry and size (where flows typically a few hundred meters long were emplaced on a steep slope) meant that near-vertical images of the whole flow field could be captured in a single image obtained from a helicopter hovering, at an altitude of 750 m and ∼1 km off shore. We used these images to adapt a thermally based effusion rate method, previously applied to low and high spatial resolution satellite data, to allow automated extraction of effusion rates from the hand-held thermal infrared imagery. A comparison between a thermally-derived (0.23–0.87 m³ s⁻¹) and dimensionally-derived effusion rate (0.56 m³ s⁻¹) showed that the thermally-derived range was centered on the expected value. Over the measurement period, the mean effusion rate was 0.38±0.25 m³ s⁻¹, which is similar to that obtained during the 1985–86 effusive eruption and the time-averaged supply rate calculated for normal (non-effusive) Strombolian activity. A short effusive pulse, reaching a peak of ∼1.2 m³ s⁻¹, was recorded on June 3, 2003. One explanation of such a peak would be an increase in driving pressure due to an increase in the height of the magma contained in the central column. We estimate that this pulse would require the magma column to attain a height of ∼190 m above the effusive vent, which is approximately the elevation difference between the vent and the floor of the NE crater. Our approach gives an easy-to-apply method that has the potential to provide effusion rate time series with a high temporal resolution.Editorial responsibility: M. Carroll     

Variations of local seismic response in Benevento (Southern Italy) using earthquakes and ambient noise recordings

The city of Benevento (Southern Italy) has been repeatedly struck by large historical earthquakes. A heterogeneous geologic structure and widespread soft soil conditions make the estimation of site effects crucial for the seismic hazard assessment of the city. From 2000 until 2004, we installed seismic stations to collect earthquake data over zones with different geological conditions. Despite the high level of urban noise, we recorded more than 150 earthquakes at twelve sites. This data set yields the first, well documented experimental evidence for weak to moderate local amplifications. We investigated site effects primarily by the classical spectral ratio technique (CSR) using a rock station placed on the Benevento hill as reference. All sites in the Calore river valley and in the eastern part of the Benevento hill show a moderate high-frequency (f > 4 Hz) amplification peak. Conversely, sites in the Sabato river valley share weak-to-moderate amplification in a wide frequency band (from 1–2 to 7–10 Hz), without evident frequency peaks. Application of no-reference-site techniques to earthquake and noise data confirms the results of the CSRs in the sites of the Calore river valley and of the eastern part of the Benevento hill, but fails in providing indications for site effects in the Sabato river valley, being the H/V ratios nearly flat. One-dimensional modeling indicates that the ground motion amplification can be essentially explained in terms of a vertically varying geologic structure. High-frequency narrow peaks are caused by the strong impedance contrast existing between near-surface soft deposits and stiff cemented conglomerates. Conversely, broad-band amplifications in the Sabato river valley are likely due to a more complex layering with weak impedance contrasts both in the shallow and deep structure of the valley.     

The role of site effects in the comparison between code provisions and the near field strong motion of the Emilia 2012 earthquakes

A damaging seismic sequence hit a wide area mainly located in the Emilia-Romagna region (Northern Italy) during 2012 with several events of local magnitude \(\hbox {M}_\mathrm{l} \ge 5\) , among which the \(\hbox {M}_\mathrm{l}\) 5.9 May 20 and the \(\hbox {M}_\mathrm{l}\) 5.8 May 29 were the main events. Thanks to the presence of a permanent accelerometric station very close to the epicentre and to the temporary installations performed in the aftermath of the first shock, a large number of strong motion recordings are available, on the basis of which, we compared the recorded signals with the values provided by the current Italian seismic regulations, and we observed several differences with respect to horizontal components when the simplified approach for site conditions (based on Vs30 classes) is used. On the contrary, when using the more accurate approach based on the local seismic response, we generally obtain a much better agreement, at least in the frequency range corresponding to a quarter wavelength comparable with the depth of the available subsoil data. Some unresolved questions still remain, such as the low frequency behaviour ( \(<\) 1 Hz) that could be due either to complex propagation at depth larger than the one presently investigated or to near source effects, and the behaviour of vertical spectra whose recorded/code difference is too large to be explained with the information currently available.     

Organic pollutants (PAHs, PCBs) in sediments from the Mar Piccolo in Taranto (Ionian Sea, Southern Italy)

Polychlorinated biphenyls (PCBs) and 17 parent polycyclic aromatic hydrocarbons (PAHs) were determined in surface sediments from nine stations in the Mar Piccolo of Taranto (Ionian Sea, Southern Italy). Total PAH concentrations ranged from 380 to 12,750 microg/kg d.w., while total PCB levels ranged from 2 to 1684 microg/kg d.w.; this values were higher than those found in others marine coastal areas of the Mediterranean Sea. For PAHs, low molecular weight/high molecular weight, phenanthrene/anthracene and fluoranthene/pyrene ratio were used for discriminating between pyrolitic and petroleum origin. Results showed that PAHs were mainly of pyrolitic origin. PCB and PAH levels in sediments were compared with Sediments Quality Guidelines (ERM-ERL, TEL-PEL indexes) for evaluation probable toxic effects on marine organism. Finally, ERM and PEL quotients were used to evaluate the degree to which chemicals exceed guidelines. Results suggest an ecotoxicological risk for benthic organisms mainly in the first inlet, where high concentrations of PCBs were found in sediments influenced by harbour activities.     

A probabilistic approach for the classification of earthquakes as ��triggered�� or ��not triggered��

The occurrence time of earthquakes can be anticipated or delayed by external phenomena that induce strain energy changes on the faults. ??Anticipated?? earthquakes are generally called ??triggered??; however, it can be controversial to label a specific earthquake as such, mostly because of the stochastic nature of earthquake occurrence and of the large uncertainties usually associated to stress modelling. Here we introduce a combined statistical and physical approach to quantify the probability that a given earthquake was triggered by a given stress-inducing phenomenon. As an example, we consider an earthquake that was likely triggered by a natural event: the M?=?6.2 13 Jan 1976 Kópasker earthquake on the Grímsey lineament (Tj?rnes Fracture Zone, Iceland), which occurred about 3?weeks after a large dike injection in the nearby Krafla fissure swarm. By using Coulomb stress calculations and the rate-and-state earthquake nucleation theory, we calculate the likelihood of the earthquake in a scenario that contains only the tectonic background and excludes the dike and in a scenario that includes the dike but excludes the background. Applying the Bayes?? theorem, we obtain that the probability that the earthquake was indeed triggered by the dike, rather than purely due to the accumulation of tectonic strain, is about 60 to 90?%. This methodology allows us to assign quantitative probabilities to different scenarios and can help in classifying earthquakes as triggered or not triggered by natural or human-induced changes of stress in the crust.     

K-ar ages of the yemen plateau

The temporal evolution of the Yemen Trap series is examined in the light of K-Ar radiometric data.Rifting and volcanic activity characterize the Yemen plateau between 30 and 20 m.y. confirming a fairly common history of the Afro-Arabian plate on both sides of the Red Sea.     

A Global Inventory of Burned Areas at 1 Km Resolution for the Year 2000 Derived from Spot Vegetation Data

Biomass burning constitutes a major contribution to global emissions of carbon dioxide, carbon monoxide, methane, greenhouse gases and aerosols. Furthermore, biomass burning has an impact on health, transport, the environment and land use. Vegetation fires are certainly not recent phenomena and the impacts are not always negative. However, evidence suggests that fires are becoming more frequent and there is a large increase in the number of fires being set by humans for a variety of reasons. Knowledge of the interactions and feedbacks between biomass burning, climate and carbon cycling is needed to help the prediction of climate change scenarios. To obtain this knowledge, the scientific community requires, in the first instance, information on the spatial and temporal distribution of biomass burning at the global scale. This paper presents an inventory of burned areas at monthly time periods for the year 2000 at a resolution of 1 kilometer (km) and is available to the scientific community at no cost. The burned area products have been derived from a single source of satellite-derived images, the SPOT VEGETATION S1 1 km product, using algorithms developed and calibrated at regional scales by a network of partners. In this paper, estimates of burned area, number of burn scars and average size of the burn scar are described for each month of the year 2000. The information is reported at the country level. This paper makes a significant contribution to understanding the effect of biomass burning on atmospheric chemistry and the storage and cycling of carbon by constraining one of the main parameters used in the calculation of gas emissions.     

Spring thermal resources for grapevine in Kőszeg (Hungary) deduced from a very long pictorial time series (1740–2009)

Since 1740 until now, the Book of Vine Branches encompasses beautiful pictorial representations of shoots and sprouts, collected every year on April 24th in the vineyards of the Hungarian town of K?szeg. A long time series (1740–2009) of sprouts phenological development coded with the BBCH scale is obtained through paintings visual inspection. Consequently, a model relating sprouts development with thermal resources accumulation is developed on the base of Wien daily air temperature series for the 1857–2009 period. Thermal resources is obtained with the Normal Heat Hours approach, a response curve method that takes into account the nonlinear response of phenological development to temperature. The model, calibrated and validated on the 1930–2009 period, shows an overestimation of thermal resources when applied to the 1857–1929, due to the more advanced phenology of that phase. Since this advance can be ascribed to genetics and management instead of more favorable thermal conditions, model outputs previous to 1930 are decreased by a constant factor. Finally, the 1740–2009 time series of grapevine spring thermal resources is obtained applying the model to the complete phenological time series. The analysis of the series highlights a first phase (1740–1780) characterized by high and stable availability of thermal resources during the 1740–1780, a second phase (1781–1820) with the lowest level of resources, a phase of intermediate availability (1821–1929) and a final present phase (1930–2009) with renewed high availability. The adopted method overcomes the lack of correlation for the post 1960 period shown by previous works.