Early detection of volcanic hazard by lidar measurement of carbon dioxide

Volcanic gases give information on magmatic processes. In particular, anomalous releases of carbon dioxide precede volcanic eruptions. Up to now, this gas has been measured in volcanic plumes with conventional measurements that imply the severe risks of local sampling and can last many hours. For these reasons and for the great advantages of laser sensing, the thorough development of volcanic lidars has been undertaken at ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic Development). In fact, lidar profiling allows one to scan remotely volcanic plumes in a fast and continuous way, and with high spatial and temporal resolution. A differential absorption lidar instrument will be presented in this paper: BILLI (BrIdge voLcanic LIdar). It is based on injection-seeded Nd:YAG laser, double-grating dye laser, difference frequency mixing and optical parametric amplifier. BILLI is funded by the ERC (European Research Council) project BRIDGE (BRIDging the gap between Gas Emissions and geophysical observations at active volcanos). It scanned the gas emitted by Pozzuoli Solfatara (Naples, Italy) and Stromboli Volcano (Sicily, Italy) during field campaigns carried out from October 13 to 17, 2014, and from June 24 to 29, 2015, respectively. Carbon dioxide concentration maps were retrieved remotely in few minutes in the crater areas. To our knowledge, it is the first time that carbon dioxide in a volcanic plume is retrieved by lidar. This result represents the first direct measurement of this kind ever performed on active volcanos and shows the high potential of laser remote sensing in early detection of volcanic hazard.     

Livelihoods, fire and policy in eastern Indonesia

Indonesian legislation calls for a zero-burning policy. This approach to fire management is largely in response to significant negative impacts on the economy and the environment, not only in Indonesia but also the neighbouring region, that result annually from peat fires in Kalimantan and Sumatra. In this context, the present paper investigates the local use and management of fire in Flores and Sumba islands in eastern Indonesia. Our appraisals show that people's livelihoods depend on fire to maintain grasslands and, therefore, that the national policy and legislation for zero-burning is inappropriate and needs to be revised. This follows from the fact that not all fires cause damage and are unwanted. Through a series of rapid rural appraisal interviews, we found that the fires in grasslands are often lit intentionally to maintain the grasslands that local people use to sustain a variety of livelihood activities such as cattle rearing, hunting and farming. Although fires can damage or destroy remnant dry forests in eastern Indonesia, in order to be effective, future policy formulations need to account for this human livelihood dimension and the geographic variation in fuels, climate and land use.     

Territorial disparities, natural resource distribution, and land degradation: a case study in southern Europe

The aim of this paper is to analyse the territorial disparities in some socio-economic and environmental factors involved in land degradation (LD) processes in a dry Mediterranean region. A simplified framework in which ecological and economic factors may increase inequality in natural resource distribution along the elevation gradient and accelerate LD is illustrated. To test at a local scale if territorial disparities observed in such factors have increased in the last period, we studied changes in LD sensitivity over thirty years in Latium, central Italy, a region prone to soil degradation phenomena. An estimate of LD sensitivity at the municipality level was obtained through a synthetic index (ISD) composed by three partial indicators analysing respectively climate and soil conditions (CLI), land use characteristics (LAN), and human pressure (POP). ISD and the three partial indicators were computed separately for 1970 and 2000. The divergence in LD sensitivity among coastal and inland areas significantly increased over the study period. In the former zones, median ISD increased with a reduction in score variability among municipalities; the reverse pattern was observed in the latter zones. Differences in ISD score among the elevation gradient are especially due to human factors affecting land use changes and agriculture intensification. New findings to be achieved in the context of human impacts on the environment as an original contribution to the study of LD at a local scale were finally delineated.     

The architecture of an incipient oceanic basin: a tentative reconstruction of the Jurassic Liguria-Piemonte basin along the Northern Apennines–Alpine Corsica transect

In this paper, a scenario for the early evolution of the Jurassic oceanic Liguria-Piemonte basin is sketched. For this purpose, four selected examples of ophiolite sequences from the Northern Apennines and Corsica are described and analyzed. In the External Ligurian units (Northern Apennines), the ocean–continent transition of the Adria plate was characterized by a basement made up of subcontinental mantle and lower continental crust, covered by extensional allochthons of upper crust. Both, the basement rocks and the extensional allochthons are cut by basaltic dikes and covered by basalts and pelagic deposits. The conjugate ocean–continent transition of the Corsica margin, represented by the Balagne nappe (Corsica), was composed of mantle peridotites and gabbros covered by basaltic flows and minor breccias, that in addition include continent-derived clasts. By contrast, the innermost (i.e., closest to the ocean) preserved area observed in the Internal Ligurian (Northern Apennines) and Inzecca (Corsica) units consists of former morphological highs of mantle peridotites and gabbros, bordered by small basins where the basement is covered by a volcano-sedimentary complex, characterized by ophiolitic breccias and cherts interlayered with basaltic flows. The overall picture resulting from our reconstructions suggests an asymmetric architecture for the Liguria-Piemonte basin with a central area bounded by two different transition zones toward the continental margins. This architecture can be interpreted as the result of a rifting process whose development includes a final stage characterized by passive, asymmetric extension of the lithosphere along an east-dipping detachment fault system.     

Deformation features within an active normal fault zone in carbonate rocks: The Gubbio fault (Central Apennines, Italy)

The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw.     

The mechanics of mudslides as a cyclic undrained–drained process

Data collected by monitoring suggest that the movement of mudslides essentially develops through alternating stages of undrained–drained deformation. Undrained conditions are established as a consequence of landslide mobilisation or reactivation. Every acceleration phase is followed by progressive deceleration associated with dissipation of excess pore pressure. This paper reports the results of some simple numerical analyses performed to investigate the role of pore pressure on mudslide behaviour.     

Geographies of uncertainty in the health benefits of air quality improvements

Assessing the long-term benefits of marginal improvements in air quality from regulatory intervention is methodologically challenging. In this study, we explore how the relative risks (RRs) of mortality from air pollution exposure change over time and whether patterns in the RRs can be attributed to air quality improvements. We employed two-stage multilevel Cox models to describe the association between air pollution and mortality for 51 cities with data from the American Cancer Society (ACS) cohort (N = 264,299, deaths = 69,819). New pollution data were computed through models that predict yearly average fine particle (PM_2.5) concentrations throughout the follow-up (1982–2000). Average PM_2.5 concentrations from 1999 to 2000 and sulfate concentrations from 1980 were also examined. We estimated the RRs of mortality associated with air pollution separately for five time periods (1982–1986, 1987–1990, 1991–1994, 1995–1998, and 1999–2000). Mobility models were implemented with a sub-sample of 100,557 subjects to assist with interpreting the RR estimates. Sulfate RRs exhibit a large decline from the 1980s to the 1990s. In contrast, PM_2.5 RRs follow the opposite pattern, with larger RRs later in the 1990s. The reduction in sulfate RR may have resulted from air quality improvements that occurred through the 1980s and 1990s in response to the acid rain control program. PM_2.5 concentrations also declined in many places, but toxic mobile sources are now the largest contributors to PM in urban areas. This may account for the heightened RR of mortality associated with PM_2.5 in the 1990s. The paper concludes with a three alternative explanations for the temporal pattern of RRs, each emphasizing the uncertainty in ascribing health benefits to air quality improvements.     

Multi‐scale modelling approach for the pushover analysis of existing RC shear walls—Part I: Model formulation

This work focuses on the modelling issues related to the adoption of the pushover analysis for the seismic assessment of existing reinforced concrete (RC) structures. To this purpose a prototype reference structure, one of the RC shear walls designed according to the multi‐fuse concept and tested on shaking table for the CAMUS project, is modelled at different levels of refinement. The meso‐scale of a stiffness‐based fibre element and the micro‐scale of the finite element (FE) method are herein adopted; in the latter separate elements are adopted for the concrete, the steel and the steel–concrete interface. This first of the two companion papers presents in detail the wall under study, illustrating the design philosophy, the geometry of the wall, the instrumentation set‐up and the test programme. The two modelling approaches are then described; the most important points in terms of element formulation and constitutive relations for materials are presented and discussed for each approach, in the light of the particular design of the wall and of its experimental behaviour. Copyright © 2007 John Wiley & Sons, Ltd.