Effect of ground-motion asynchronism on the equivalent acceleration of earth dams

Under seismic loads the deformability of an earth dam may induce several effects, including ground-motion amplification and asynchronism between different points of the dam embankment. The paper analyses the asynchronous effects occurring in two existing earth dams, representing well-documented case histories: the El Infiernillo Dam (Mexico) and the Camastra Dam (Italy). Asynchronous effects are analysed by theoretical predictions of the dam seismic response by adopting an advanced dynamic approach, which takes into account the main features that dam soils exhibit under cyclic loading conditions. For different potentially unstable masses within the dam embankment, equivalent accelerations were computed as the ratio between the resultant of the inertial forces and the weight of the volume V associated to the unstable mass. With the exception of very cortical sliding surfaces – not significant for dam stability – in most of the analysed cases the equivalent seismic coefficients do not exceed the peak acceleration at the dam base.     

Characterization of salt-water intrusion in the lower Esino Valley, Italy using a three-dimensional numerical model

A seawater-intrusion study was conducted at an oil-refinery site located on the coast in the lower Esino Valley, Italy. A steady-state density-dependent flow model was used in order to understand the position of the freshwater/salt-water interface, as influenced by the hydrogeologic structure and the presence of industrial activities and a river. Collected data and model results showed that in a large part of the area, the salt-water interface is steep and can penetrate only a few meters inland. On the other hand, close to the river mouth, seawater represents the main saline source for the aquifer. The river, in connection with the sea, can enhance seawater encroachment into the coastal aquifer; a long-term survey of river level and chloride concentrations in groundwater is recommended to further improve the physical model and to obtain a better calibration. At the refinery site, two “secondary” sources of saline water were identified and were demonstrated to have had a great influence on the presence of brackish waters in the unconfined aquifer: leakage from the fire-extinguishing system (network of pipes containing seawater) and rough sea events. This confirmed that groundwater contamination by chloride can result from means other than seawater intrusion.     

Observations of atmospheric water vapor above the Tharsis volcanoes on Mars with the OMEGA/MEx imaging spectrometer

The OMEGA imaging spectrometer onboard the Mars Express spacecraft is particularly well suited to study in detail specific regions of Mars, thanks to its high spatial resolution and its high signal-to-noise ratio. We investigate the behavior of atmospheric water vapor over the four big volcanoes located on the Tharsis plateau (Olympus, Ascraeus, Pavonis and Arsia Mons) using the 2.6 μm band, which is the strongest and most sensitive H₂O band in the OMEGA spectral range. Our data sample covers the end of MY26 and the whole MY27, with gaps only in the late northern spring and in northern autumn. The most striking result of our retrievals is the increase of water vapor mixing ratio from the valley to the summit of volcanoes. Corresponding column density is often almost constant, despite a factor of ∼5 decrease in air mass from the bottom to the top. This peculiar water enrichment on the volcanoes is present in 75% of the orbits in our sample. The seasonal distribution of such enrichment hints at a seasonal dependence, with a minimum during the northern summer and a maximum around the northern spring equinox. The enrichment possibly also has a diurnal trend, being the orbits with a high degree of enrichment concentrated in the early morning. However, the season and the solar time of the observations, due to the motion of the spacecraft, are correlated, then the two dependences cannot be clearly disentangled. Several orbits exhibit also spatially localized enrichment structures, usually ring- or crescent-shaped. We retrieve also the height of the saturation level over the volcanoes. The results show a strong minimum around the aphelion season, due to the low temperatures, while it raises quickly before and after this period. The enrichment is possibly generated by the local circulation characteristic of the volcano region, which can transport upslope significant quantities of water vapor. The low altitude of the saturation level during the early summer can then hinder the transport of water during this season. The influence of the coupling between atmosphere and surface, due mainly to the action of the regoliths, can also contribute partially to the observed phenomenon.     

Propagation of P and S-waves in magmas with different crystal contents: Insights into the crystallinity of magmatic reservoirs

Increasing amount of crystals tends to reduce the mobility of magmas and modifies its elastic characteristics (e.g. [Caricchi, L. et al., 2007. Non-Newtonian rheology of crystal-bearing magmas and implications for magma ascent dynamics. Earth and Planetary Science Letters, 264: 402–419.; Bagdassarov, N., Dingwell, D.B. and Webb, S.L., 1994. Viscoelasticity of crystal- and bubble-bearing rhyolite melts. Physics of the Earth and Planetary Interior, 83: 83–99.]). To quantify the effect of crystals on the elastic properties of magmas the propagation speed of shear and compressional waves have been measured at pressure and temperatures relevant for natural magmatic reservoirs. The measurements have been performed in aggregates at variable particle fractions (? = 0–0.7). The measurements were carried out at 200 MPa confining pressure and temperatures between 300 K and 1273 K (i.e. across the glass transition temperature (Tg) from glass to melt). The specimens were mixtures of a haplogranitic melt containing 5.25 wt.% H₂O and variable amounts of sub-spherical alumina particles. Additional experiments were carried out on a sample containing both, crystals and air bubbles. The temperature derivatives of the shear (dVs/dT) and compressional wave (dVp/dT) velocities for pure glass and samples with a crystal fraction of 0.5 are different below and above the glass transition temperature. For a crystal fraction 0.7, only dVp/dT changed above the Tg. In the presence of gas bubbles, Vp and Vs decrease constantly with increasing temperature. The bubble-bearing material yields a lower bulk modulus relative to its shear modulus. The propagation velocities of compressional and shear waves increase non-linearly with increasing crystal fraction with a prominent raise in the range 0.5 < ? < 0.7. The speed variations are only marginally related to the density increase due to the presence of crystals, but are dominantly related to the achievement of a continuous crystal framework. The experimental data set presented here can be utilized to estimate the relative proportions of crystals and melt present in a magmatic reservoir, which, in turn, is one of the fundamental parameters determining the mobility of magma and, consequently, exerting a prime control on the likelihood of an eruption from a sub-surficial magma reservoir.     

Weak gravitational lensing by voids

We consider the prospects for detecting weak gravitational lensing by underdensities (voids) in the large-scale matter distribution. We derive the basic expressions for magnification and distortion by spherical voids. Clustering of the background sources and cosmic variance are the main factors that limit in principle the detection of lensing by voids. We conclude that only voids with radii larger than ∼100  h ⁻¹ Mpc have lensing signal-to-noise ratio larger than unity.     

The power spectrum of the Lyman-α clouds

We investigate the clustering properties of 13 QSO lines of sight in flat space, with average redshifts from z ≈2 to 4. We estimate the 1D power spectrum and the integral density of neighbours, and discuss their variation with respect to redshift and column density. We compare the results with standard CDM models, and estimate the power spectrum of Lyman- α clustering as a function of both redshift and column density. We find that (a) there is no significant periodicity or characteristic scale; (b) the clustering depends on both column density and redshift; (c) the clustering increases linearly only if at the same time the H  i column density decreases strongly with redshift. The results remain qualitatively the same, assuming an open cosmological model.     

A systematic analysis of the <Emphasis Type="Italic">XMM-Newton</Emphasis> background: II. Properties of the in-Field-Of-View excess component

We present an accurate characterization of the particle background behaviour on XMM-Newton based on the entire EPIC archive. This corresponds to the largest EPIC data set ever examined. Our results have been obtained thanks to the collaboration between the FP7 European program EXTraS and the ESA R&D ATHENA activity AREMBES. We used as a diagnostic an improved version of the diagnostic which compares the data collected in unexposed region of the detector with the region of the field of view in the EPIC-MOS. We will show that the in Field-of-View excess background is made up of two different components, one associated to flares produced by soft protons and the other one to a low-intensity background. Its origin needs to be further investigated.     

A systematic analysis of the XMM-Newton background: I. Dataset and extraction procedures

XMM-Newton is the direct precursor of the future ESA ATHENA mission. A study of its particle-induced background provides therefore significant insight for the ATHENA mission design. We make use of ～12 years of data, products from the third XMM-Newton catalog as well as FP7 EXTraS project to avoid celestial sources contamination and to disentangle the different components of the XMM-Newton particle-induced background. Within the ESA R&D AREMBES collaboration, we built new analysis pipelines to study the different components of this background: this covers time behavior as well as spectral and spatial characteristics.     

Sequence stratigraphy based on high-resolution seismic profiles in the late Pleistocene and Holocene deposits of the Venice area

The sequence-stratigraphic investigation by Very High-Resolution (VHR) seismic profiles allowed recognition of the detailed architecture of the late Pleistocene and Holocene succession of the Venice area. In this way deposits previously known by the analyses of scattered cores, mainly taken along the lagoon margin and the littoral strips, have been correlated at regional scale including the near offshore sector and the result has pointed out the lateral variability of the stratal architecture. Late Pleistocene deposits consist of an aggrading floodplain and fluvial channel fills accumulated during decreasing eustatic sea level, and they are coeval with offlapping forced regressive marine wedges in the Central Adriatic basin. The Holocene sequence is composed of three main seismic units separated by major stratal surfaces. Unit 1 (up to 9 m thick) is formed by channelized deposits separated by areas showing sub-horizontal and hummocky reflectors, and is bounded at the base by a surface that records prolonged conditions of subaerial exposure and at the top by a flatter surface resulting from erosion by marine processes. Deposits of Unit 1 are interpreted as estuarine and distributary channel fills, and back-barrier strata. Unit 2 is well distinguishable from Unit 1 only in the offshore area and at the barrier island bounding the Venice Lagoon, and is composed of a prograding marine wedge (up to 10 m thick) that interacts laterally with ebb tidal deltas. Unit 3 consists of a tidal channel complex and inlet deposits, which testify the evolution of the lagoon area. Tidal channels are entrenched in the lagoon mud flat (coeval with Units 1–2) and cut the Pleistocene–Holocene boundary in several places.Following current sequence-stratigraphic concepts, the Holocene sequence is composed of a paralic transgressive systems tract (TST) (Unit 1) overlying a sequence boundary (the Pleistocene–Holocene boundary) and overlain by a marine highstand systems tract (HST) (Unit 2) in seaward locations and by highstand lagoonal deposits landwards. TST and HST are separated by a downlap surface that is amalgamated with a wave ravinement surface in several places. Unit 3 is coeval with the upper part of Unit 2, and its development has been favoured by human interventions, which led to a transgression limited to the lagoon area.Local factors during the deposition, i.e. subsidence, sediment supply, physiography, and current/wave regimes, led to a significant lateral variability in the architecture of the Holocene sequence, as evidenced by the extreme thickness variation of the TST along both depositional strike and dip. The HST, instead, shows less pronounced strike variations in the stratal architecture. Also, present data clearly evidence that the human impact has a great relevance in influencing the late Holocene sedimentation.