Assessment of environmental hazards at abandoned mining sites: A case study in Sardinia,Italy

In the last two centuries, several Pb–Zn mines were active in the Rio Mannu basin near Narcao (SW Sardinia, Italy), but are now abandoned. These abandoned mines pose a serious risk to the population and required an assessment of the hazard sources and the contaminant pathways in the area. The characterization plan of the Rio Mannu basin was carried out according to Italian protocols. Specifically, samples of soil, stream sediment, fine-grained ore-processing waste (from washery and flotation processes), surface water and groundwater have been analyzed in order to assess the levels of contamination in each mine area and the risks in the plains surrounding the site. Several potential chemical contaminants were considered both in solid materials and water samples. The Rosas mine was recognized as the most contaminated area in the basin, due to the presence of a large tailing pond, some fine-grained waste piles and two mine adits with concentrations of the toxic elements As, Cd, Cu, Pb, Sb and Zn exceeding Italian regulatory standards. The dispersion of contaminants occurs downstream from the small stream draining the area. In case of heavy rain the runoff into the streamlet transports the contaminated material far into the plain. The results of this study show that the characterization plan is a relatively cheap tool for establishing mitigation actions, prior to the realization of a complete, and usually expensive, remediation project at abandoned mine sites. Urgent recommended actions in the Rio Mannu basin include the treatment of the adit water prior to its discharge into the Rio Barisonis; the construction of drainage barriers on waste piles to reduce runoff and solid transport into the Rio Barisonis; the consolidation of the earthen dam containing the tailing pond of Rosas to avoid the deepening of erosion furrows that may threaten its stability.     

Exact density–potential pairs from complex-shifted axisymmetric systems

In a previous paper, the complex-shift method has been applied to self-gravitating spherical systems, producing new analytical axisymmetric density–potential pairs. We now extend the treatment to the Miyamoto–Nagai disc and the Binney logarithmic halo, and we study the resulting axisymmetric and triaxial analytical density–potential pairs; we also show how to obtain the surface density of shifted systems from the complex shift of the surface density of the parent model. In particular, the systems obtained from Miyamoto–Nagai discs can be used to describe disc galaxies with a peanut-shaped bulge or with a central triaxial bar, depending on the direction of the shift vector. By using a constructive method that can be applied to generic axisymmetric systems, we finally show that the Miyamoto–Nagai and the Satoh discs, and the Binney logarithmic halo cannot be obtained from the complex shift of any spherical parent distribution. As a by-product of this study, we also found two new generating functions in closed form for even and odd Legendre polynomials, respectively.     

Modelling river and riparian vegetation interactions and related importance for sustainable ecosystem management

We discuss the importance of modelling riparian vegetation and river flow interactions under differing hydrologic regimes. Modelling tools have notable implications with regard to the understanding of riverine ecosystem functioning and to promote sustainable management of water resources. We present both deterministic and stochastic approaches with different levels of simplification, and discuss their use in relation to river and vegetation dynamics at the related scale of interest. We apply such models to both meandering and braided rivers, in particular focusing on the floodplain dynamics of an alpine braided river affected by water impoundment. For this specific case we show what the expected changes in riparian vegetation may be in a ‘controlled release’ scenario for the postdam river Maggia, Switzerland. Finally, the use of these models is discussed in the context of current research efforts devoted to river restoration practice.     

Comets and climate

No connection between comets and climate has been proposed until now; here, we show that such a connection exists. We use a model to evaluate the shadowing effect due to cometary dust released by comet 1P/Halley in the inner solar system. We find that comet Halley has left a detectable fingerprint in the climate records of the last two millennia. The print shows up as a periodic cooling of the order of 0.08 °C. This temperature drop is comparable with other natural fluctuations. The finding will add a brick to our knowledge of the climate system and could allow to improve our predictive capacity of future climate.     

Bedload hysteresis in a glacier‐fed mountain river

Sediment transport during flood events often reveals hysteretic patterns because flow discharge can peak before (counterclockwise hysteresis) or after (clockwise hysteresis) the peak of bedload. Hysteresis in sediment transport has been used in the literature to infer the degree of sediment availability. Counterclockwise and clockwise hysteresis have been in fact interpreted as limited and unlimited sediment supply conditions, respectively. Hysteresis has been mainly explored for the case of suspended sediment transport, but it was rarely reported for bedload transport in mountain streams. This work focuses on the temporal variability of bedload transport in an alpine catchment (Saldur basin, 18.6 km², Italian Alps) where bedload transport was monitored by means of an acoustic pipe sensor which detects the acoustic vibrations induced by particles hitting a 0.5m‐long steel pipe. Runoff dynamics are dominated by snowmelt in late spring/early summer, mostly by glacier melt in late summer/early autumn, and by a combination of the snow and glacier melt in mid‐summer. The results indicate that hysteretic patterns during daily discharge fluctuations are predominantly clockwise during the snowmelt period, likely due to the ready availability of unpacked sediments within the channel or through bank erosion in the lower part of the basin. On the contrary, counterclockwise hysteresis tend to be more frequent during late glacier melting period, possibly due to the time lag needed for sediment provided by the glacial and peri‐glacial area to be transported to the monitoring section. However, intense rainfall events occurring during the glacier melt period generated predominantly clockwise hysteresis, thus indicating the activation of different sediment sources. These results indicate that runoff generation processes play a crucial role on sediment supply and temporal availability in mountain streams. Copyright © 2014 John Wiley & Sons, Ltd.     

A flume experiment on wood storage and remobilization in braided river systems

This work investigates wood dynamics in braided streams through physical modelling in a mobile bed laboratory flume, with the specific objective to characterize wood storage and turnover as a function of wood input rate and of wood element type. Three parallel channels (1.7 m wide, 10 m long) filled with uniform sand were used to reproduce braided networks with constant water discharge and sediment feeding. Wood dowels with and without simplified root wads were regularly added at the upstream end of each flume at different input rates, with a 1:2:3 ratio between the three flumes. Temporal evolution of wood deposition patterns and remobilization rates were monitored by a series of vertical images that permitted the recognition of individual logs. Results show that wood tends to disperse in generally small accumulations (< 5 logs), with higher spatial density on top of sediment bars, and is frequently remobilized due to the intense morphological changes. The amount of wood stored in the channel depends on log input rate through a non‐linear relationship, and input rates exceeding approximately 100 logs/hour determine a sharp change in wood dynamics, with higher storage volume and augmented formation of large jams (> 10 elements) that are less prone to remobilization. Presence of root wads seems to play a minor role in wood deposition, but it reduces the average travel distance of logs. Turnover rates of logs were similar in the three flumes, independently of wood input rate and largely resembling the turnover rate of exposed bars. For the simulated conditions, significant effects of wood on bed morphology were not observed, suggesting that interactions with fine sediments and living vegetation are crucial to form large, stable wood jams able to bring about relevant morphological changes. Copyright © 2014 John Wiley & Sons, Ltd.     

A relocatable ocean model in support of environmental emergencies

During the Costa Concordia emergency case, regional, subregional, and relocatable ocean models have been used together with the oil spill model, MEDSLIK-II, to provide ocean currents forecasts, possible oil spill scenarios, and drifters trajectories simulations. The models results together with the evaluation of their performances are presented in this paper. In particular, we focused this work on the implementation of the Interactive Relocatable Nested Ocean Model (IRENOM), based on the Harvard Ocean Prediction System (HOPS), for the Costa Concordia emergency and on its validation using drifters released in the area of the accident. It is shown that thanks to the capability of improving easily and quickly its configuration, the IRENOM results are of greater accuracy than the results achieved using regional or subregional model products. The model topography, and to the initialization procedures, and the horizontal resolution are the key model settings to be configured. Furthermore, the IRENOM currents and the MEDSLIK-II simulated trajectories showed to be sensitive to the spatial resolution of the meteorological fields used, providing higher prediction skills with higher resolution wind forcing.