Experimental research on physical properties of saline soil subgrade filler in Chaerhan region

In order to improve the engineering stability of saline soil of high chloride content in the Chaerhan salt lake region, six typical characteristics saline soil samples were selected, and tests on their...     

Development of gullies and sediment production in the black soil region of northeastern China

Gully erosion is an important environmental hazard in the black soil region of northeastern China. It is a primary sediment source in the region which needs appropriate soil conservation practices. Gully incision in rolling hills typical of this region was monitored using real-time kinematic GPS to assess the rates of gully development and the resultant sediment production. From 2002 to 2005, gully heads in the study area retreated between 15.4 and 33.5 m, giving an average retreat rate of 8.4 m yr^− 1. Field measurements showed that total sediment production due to gully erosion during the three years ranged between 257 and 1854 m³ yr^− 1, which is equivalent to 326 to 2355 t yr^− 1, with gully-head retreat accounting for 0 to 21.7% (4.4% in average). The sediment delivery ratio was especially high during the summer rainy season (56% in average). Sediment production by ephemeral gullies and permanent gullies was 1.5 times greater than that from surface erosion. Gully heads retreated faster in the spring freeze–thaw period than in the summer. The stage of gully development could be identified based on short-term changes in the gully erosion rate.     

Coupled three-dimensional discrete element–finite difference simulation of dynamic compaction

Discrete element method has been widely adopted to simulate processes that are challenging to continuum-based approaches. However, its computational efficiency can be greatly compromised when large number of particles are required to model regions of less interest to researchers. Due to this, the application of DEM to boundary value problems has been limited. This paper introduces a three-dimensional discrete element–finite difference coupling method, in which the discrete–continuum interactions are modeled in local coordinate systems where the force and displacement compatibilities between the coupled subdomains are considered. The method is validated using a model dynamic compaction test on sand. The comparison between the numerical and physical test results shows that the coupling method can effectively simulate the dynamic compaction process. The responses of the DEM model show that dynamic stress propagation (compaction mechanism) and tamper penetration (bearing capacity mechanism) play very different roles in soil deformations. Under impact loading, the soil undergoes a transient weakening process induced by dynamic stress propagation, which makes the soil easier to densify under bearing capacity mechanism. The distribution of tamping energy between the two mechanisms can influence the compaction efficiency, and allocating higher compaction energy to bearing capacity mechanism could improve the efficiency of dynamic compaction.

     

Rapid exhumation of basement rocks along the northern margin of the North China craton in the early Jurassic: evidence from the Xiabancheng Basin,Yanshan Tectonic Belt

Early Mesozoic Basins in the Yanshan Fold–Thrust Belt (YFTB), located along the northern margin of the North China Craton (NCC), record significant intraplate deformation of unknown age. In this article, we present evidence for the rapid exhumation of high‐grade basement rocks along the northern margin of the NCC in the Early Mesozoic. U–Pb geochronology of detrital zircons constrains the maximum depositional ages of syntectonic sedimentary units that formed during the unroofing of basement rocks and plutons in the Xiabancheng Basin. In the Early Mesozoic, the Xiabancheng Basin recorded a dramatic transformation in depositional environments, related to a significant change in the regional tectonic setting. In this study, the tectonic evolution of the YFTB is established from paleocurrent data and U–Pb zircon ages of sandstone and granitic gravels of the Xingshikou Formation, Xiabancheng Basin. The paleocurrent direction of meandering fluvial facies in the Triassic Liujiagou and Ermaying Formations are from east to west. In contrast, the overlying Xingshikou Formation consists of alluvial fan facies with paleocurrent directions from north‐northwest to south‐southeast. The lower and middle segments of the Xingshikou Formation record rapid exhumation of basement rocks along the northern margin of the NCC. U‐Pb ages of detrital zircons within the Xingshikou Formation are characterized by three major U–Pb age groups: 2.2–2.5 Ga, 1.7–1.8 Ga and 193–356 Ma. From 193 Ma to 356 Ma, a subsidiary peak occurs at 198 ± 5 Ma, constraining the sedimentation age of the Xingshikou Formation to the Early Jurassic. Zircon from the Wangtufang pluton in the northern portion of the Xiabancheng Basin yields U–Pb ages of 191 ± 1 Ma and 207 ± 1 Ma. Within error, these crystallization ages are identical to detrital zircon ages of 206 ± 1 Ma and 206 ± 2 Ma obtained for granitic gravel clasts in the Xingshikou Formation. Thus, the Wangtufang pluton and surrounding basement rocks must have experienced rapid uplift and exhumation during the Early Jurassic. The onset of exhumation along the northern margin of the NCC occurred at ca. 198–180 Ma.     

用CAPPI和PPI资料测定区域降水量精度比较

应用上海中心气象台７１４数字化天气雷达的体积扫描资料所得的不同高度上的ＣＡＰＰＩ资料和低仰角时ＰＰＩ资料。估算区域降水量并得到降水量分布形势。然后采用平均校准法进行了校准，最后又与用雨量计网测量的区域降水量及其分布形势作了比较，得到一些有意义的结果。     

Impact of Gas Adsorption Induced Coal Matrix Damage on the Evolution of Coal Permeability

It has been widely reported that coal permeability can change from reduction to enhancement due to gas adsorption even under the constant effective stress condition, which is apparently inconsistent with the classic theoretical solutions. This study addresses this inconsistency through explicit simulations of the dynamic interactions between coal matrix swelling/shrinking induced damage and fracture aperture alteration, and translations of these interactions to permeability evolution under the constant effective stress condition. We develop a coupled coal–gas interaction model that incorporates the material heterogeneity and damage evolution of coal, which allows us to couple the progressive development of damage zone with gas adsorption processes within the coal matrix. For the case of constant effective stress, coal permeability changes from reduction to enhancement while the damage zone within the coal matrix develops from the fracture wall to further inside the matrix. As the peak Langmuir strain is approached, the decrease of permeability halts and permeability increases with pressure. The transition of permeability reduction to permeability enhancement during gas adsorption, which may be closely related to the damage zone development in coal matrix, is controlled by coal heterogeneity, external boundary condition, and adsorption-induced swelling.     

Physicochemistry and Mineralogy of Storm Dust and Dust Sediment in Northern China

Dust sediments collected from 1995 to 1998 in Beijing, Dunhuang, Inner Mongolia, Kashi, the Kunlun Mountains, Lanzhou, Ningxia, the Taklimakan Desert, and Xi‘an, China, were characterized in terms of their physical, chemical, and mineralogical properties. Most aerosols and dust analysed ranged in texture from silty clay to clay loam. Their median particle diameters (Mds) generally ranged between 5 to 63μm,coinciding with those of loess from central China and the finest sand from northwestern China. The dust sediments were characterized by a predominance of SiO2 and Al2O3, followed by K2O. Their SiO2/Al2O3and K2O/SiO2 molar ratios ranged from 5.17 to 8.43 and from 0.009 to 0.0368, respectively. The mass concentration spectrum during a dust storm showed a single peak, rather than the triple peak generally observed under clear sky conditions. The dominant minerals were chlorite, illite, calcite, and dolomite.These physical, chemical, and mineralogical properties were consistent with those of aeolian soils and loess in western and central China. The results suggest that aerosols and fine-gained fractions of dust sediments collected in northern China are mainly composed of soil material transported from the arid and semiarid regions of China and Mongolia by prevailing winds. The rate of deposition and properties of dust falling on eastern China were strongly influenced by meteorological conditions, season, latitude, longitude, and altitude of the sampling sites.     

东南极埃默里冰架东缘赖茵博尔特丘陵构造变形过程及其构造意义

对赖茵博尔特丘陵地区的构造变形过程分析表明,该地区发育4期主要构造变形.D1期主要是区域性近EW向片麻理形成阶段,其变形时代为＞970 Ma;D2期是在正片麻岩形成了近EW向轴面陡立韧性剪切褶皱,以及剪切面理上发育的各种紧闭不对称褶皱和低角度拉伸线理,其变形时代为新元古代早期.D3期变形发生在寒武纪早期,以构造抬升至地...     

干涸尾闾湖盆区泥漠地表磨蚀释尘特征

沙粒的表面磨蚀效应是地表产尘、释尘的重要机制,针对干湖盆泥漠地表开展磨蚀释尘实验研究,对理解干湖盆地表风蚀过程及盐碱尘暴形成机理具有重要意义。对采自西居延海干涸湖盆泥漠地表土样进行室内磨蚀模拟实验,研究了不同粒级（细、中、粗）沙粒不同落沙角度（30°,45°,60°）的磨蚀效应。结果表明：（1）泥漠地表磨蚀实验中能够产生明显释尘效应的沙粒粒级阈值为中沙（0.25 mm<M_d<0.50 mm）;（2）磨蚀粒径粒级相同时,磨蚀角度会对泥漠地表磨蚀释尘速率产生影响,磨蚀量的角度排序为60°>30°>45°,但同一粒级3种角度下的磨蚀释尘率差异不显著。（3）磨蚀角度为45°时,计算了泥漠地表的质量磨蚀率与能量磨蚀率,其中中沙为0.04 g·kg^-1、0.43 g·J^-1,粗沙为0.08 g·kg^-1、0.74 g·J^-1,极粗沙为0.26 g·kg^-1、2.54 g·J^-1;在磨蚀沙粒粒级倍增而磨蚀角度不变情况下,泥漠地表磨蚀释尘率与能量磨蚀率未发生正比例线性增长变化。     

新疆和田河流域柽柳沙堆的生物地貌发育过程

Tamarix nabkha is one of the most widespread nabkhas,distributing in the arid region of China.Based on the observations outdoors and the simulation experiments in laboratories,analysis in this paper refers to the biological geomorphologic features and growth process of Tamarix nabkhas in the middle and lower reaches of the Hotan River,Xin- jiang.And the results indicate that the ecological type of Tamarix in the study area is a kind of Tugaic soil habitat based on the deep soil of the Populus Diversifolia f...