Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Local site effect microzonation of Lorca town (SE Spain)

Local site effect assessment based on subsurface ground conditions is often the key to evaluate urban seismic hazard. The site effect evaluation in Lorca town (south-eastern Spain) started with a classification of urban geology through the geological mapping at scale 1:10,000 and the use of geotechnical data and geophysical surveys. The 17 geological formations identified were classified into 5 geological/seismic formations according to their seismic amplification capacity obtained from ambient vibration measurements as well as from simultaneous strong motion records. The shear-wave velocity structure of each geological/seismic formation was evaluated by means of inversion of Rayleigh wave dispersion data obtained from vertical-component array records of ambient noise. Nakamura’s method was applied to determine a predominant period distribution map. The spectral amplification factors were fourfold the values recorded in a reference hard-rock site. Finally, the capability of this study for explaining the damage distribution caused by the May 11th, 2011 Lorca destructive earthquake (Mw \(=\) 5.2) was examined. The methods used in this work are of assistance to evaluate ground amplification phenomena in urban areas of complex geology as Lorca town due to future earthquakes with applicability on urban seismic risk management.     

Optimum size and density of surface grid arrays for retrieving accurate shear-tensile fracturing of microearthquakes

Surface arrays became an important tool for monitoring the induced seismicity in hydraulic fracturing experiments and for assessing the impact of fluid injection on the fracturing process of microearthquakes. The layout of sensors plays a key role in this task because it controls the accuracy of event locations and retrieved seismic moment tensors. We simulate various configurations of grid sensor arrays characterized by a different number of sensors, array span, sensor spacing, depth of sources and various shear/tensile source mechanisms of events. The moment tensor inversion is carried out using synthetically calculated P-wave amplitudes with added random noise. A bias in the solutions is evaluated by errors in the double-couple percentage of inverted moment tensors because the double-couple errors inform us about the sensitivity of the network to detect the shear/tensile fracturing mode of induced microearthquakes. The results show that the accuracy of the double-couple percentage is mostly controlled by the offset-to-depth ratio R defined as the ratio of half of the network size to the event depth. The optimum value of R is in the range of 0.75–1.5 irrespective of the type of the focal mechanism. If 121 (11 × 11) sensors are distributed in a regular grid and recorded data are characterized by a 10% random noise, the double-couple error is less than 6%. This error increases, if R is not optimum or if the number of sensors is reduced. However, even sparse arrays with 49 (7 × 7) or 16 (4 × 4) sensors can yield a reasonable accuracy, provided the surface grid arrays are designed to have an optimum size.     

Water quality and presence of pesticides in a tropical coastal wetland in southern Mexico

The water quality of the Pozuelos-Murillo lagoon system in southern Mexico was evaluated during three periods between March and October 2002, with particular emphasis on the detection of organochlorine and organophosphorous pesticide residues in water and sediments. Physicochemical and microbiological parameters of water were also measured and integrated in a water quality index (WQI). Multivariate analysis was used to regionalise the lagoon system as a function of the behaviour of all measured parameters. Solid phase micro-extraction followed by gas chromatography (SPME-GC) was used for pesticide analysis. The concentration of phosphorous was found to be higher than that of nitrogenous compounds. This, besides a deficiency in dissolved oxygen and a high organic matter concentration (as COD), reflects eutrophication processes in some areas of the system. Measured levels of faecal coliforms and oils and greases were above the limits established by Mexican law and comparable to the concentrations reported for other highly polluted systems in Mexico. Residues of DDD (2.0 microg L(-1)) in water and DDE (247 ng g(-1)) and endosulfan I (814 ng g(-1)) sediments were detected by SPME-GC. The spatial distribution of these contaminants implies major potential risks because the most polluted sites were found to be those with the highest fishing activity. Although in general the WQI is on acceptable levels (65-80%), some contamination problems are evident.     

An indurated Pleistocene coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean): evidence for a prolonged relative sea-level stillstand

The objective of this study is to document and interpret a recently discovered carbonate-cemented coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean Sea). The coastal barrier was identified in a high-resolution digital bathymetric model based on a cartographic survey of the study area using a multibeam echosounder. Moreover, radiocarbon dating and petrographic analyses were performed on a rock sample recovered from the seabed. The data reveal the submerged coastal barrier to be approx. 1.7 km wide and 70 km long, and incised by channels of various dimensions. Aligned more or less parallel to the modern coastline, it is interpreted as corresponding to the shoreline of a former sea-level stillstand. The barrier and lagoon system became stranded above sea level in the course of a subsequent forced regression, which also caused the incision of the river courses. Age dating of the cemented rock suggests that the fossil coastal barrier most probably formed during the prolonged Tyrrhenian (Eemian) sea-level highstand, induration taking place by carbonate cementation at the contact between freshwater and seawater (beach-rock formation). The fact that the fossil barrier is today submerged below modern sea level is explained by the sustained subsidence affecting the region.     

Earthquakes in the Czech Republic and Surrounding Regions in 1995–1999

In the time span from January 1995 to December 1999 the Czech National Seismological Network (CNSN), consisting of ten permanent digital broadband stations, several local networks and two data centers, detected and recorded 9530 regional natural seismic events, 27 greater than magnitude 2. Most of these events were located by the Czech Seismological Service (CSS), and the most prominent of them were analyzed in detail. A large number of quarry blasts were recorded as well but were not included in the analysis. We provide basic information on the configuration of the CNSN and on the way of routine data processing employed by the CSS in this paper. The over-all regional seismicity monitored by the CNSN in 1995–1999 is briefly reviewed. The main results of observations and evaluation of the local (NW-Bohemia/Vogtland, South Bohemia, Sudeten) and induced (Kladno, Píbram, Upper Silesia, Lubin/Poland) seismic activity within this period are presented in a condensed form. Finally, a summary on macroseismic observations on the territory of the Czech Republic in 1995–1999 is also presented.     

Behavioural-geographical aspects of environmental quality

The behavioural approach in human geography accentuates the view of quality of the environment through man and his value orientations. The quality of environment from the point of view of human experience raises behavioural-geographical questions that are the core of the presented topic. Aspects of environmental imaginations and sensations as well as human value system are presented as variables affecting the structure of the perceived environment and human spatial behaviour. In this context, the authors present results of two behavioural studies that correspond to new models of man and environment from the viewpoint of a behavioural approach. The suggested humanistic approach in behavioural geography emphasizes above all the emotional aspect of the relationship between man and environment, which through environmental values, spatial sensations, and meanings, leads to human spatial behaviour.     

Response of single benthic metrics and multi-metric methods to anthropogenic pressure gradients, in five distinct European coastal and transitional ecosystems

In recent times many benthic indices have been proposed to assess the ecological quality of marine waters worldwide. In this study we compared single metrics and multi-metric methods to assess coastal and transitional benthic status along human pressure gradients in five distinct environments across Europe: Varna bay and lake (Bulgaria), Lesina lagoon (Italy), Mondego estuary (Portugal), Basque coast (Spain) and Oslofjord (Norway). Hence, 13 single metrics (abundance, number of taxa, and several diversity and sensitivity indices) and eight of the most common indices used within the European Water Framework Directive (WFD) for benthic assessment were selected: index of size spectra (ISS), Benthic assessment tool (BAT), Norwegian quality index (NQI), Multivariate AMBI (M-AMBI), Benthic quality index (BQI), (Benthic ecosystem quality index (BEQI), Benthic index based on taxonomic sufficiency (BITS), and infaunal quality index (IQI). Within each system, sampling sites were ordered in an increasing pressure gradient according to a preliminary classification based on professional judgement. The different indices are largely consistent in their response to pressure gradient, except in some particular cases (i.e. BITS, in all cases, or ISS when a low number of individuals is present). Inconsistencies between indicator responses were most pronounced in transitional waters (i.e. IQI, BEQI), highlighting the difficulties of the generic application of indicators to all marine, estuarine and lagoonal environments. However, some of the single (i.e. ecological groups approach, diversity, richness) and multi-metric methods (i.e. BAT, M-AMBI, NQI) were able to detect such gradients both in transitional and coastal environments, being these multi-metric methods more consistent in the detection than single indices. This study highlights the importance of survey design and good reference conditions for some indicators. The agreement observed between different methodologies and their ability to detect quality trends across distinct environments constitutes a promising result for the implementation of the WFD’s monitoring plans. Moreover, these results have management implications, regarding the dangers of misclassification, uncertainty in the assessment, use of conflicting indices, and testing and validation of indices.