A multiple linear statistical model for estimating the mean maximum urban heat island

Summary ¶This study examines the spatial and quantitative influence of urban factors on the surface air temperature field of the medium-sized of Szeged, Hungary, using mobile measurements under different weather conditions in the periods of March 1999–February 2000 and April–October 2002. Efforts have been concentrated on the development of the urban heat island (UHI) in its peak development during the diurnal cycle. Tasks included: (1) determination of spatial distribution of mean maximum UHI intensity and some urban surface parameters (built-up and water surface ratios, sky view factor, building height) using the standard Kriging procedure, as well as (2) development of a statistical model in the so-called heating and non-heating seasons using the above mentioned parameters and their areal extensions. In both seasons the spatial distribution of the mean maximum UHI intensity fields had a concentric shape with some local irregularities. The intensity reaches more than 2.1°C (heating season) and 3.1°C (non-heating season) in the centre of the city. For both seasons statistical model equations were determined by means of stepwise multiple linear regression analysis. As the measured and calculated mean maximum UHI intensity patterns show, there is a clear connection between the spatial distribution of the urban thermal excess and the examined land-use parameters, so these parameters play an important role in the evolution of the strong UHI intensity field. From the above mentioned parameters the sky-view factor and the building height were the most determining factors which are in line with the urban surface energy balance. Therefore in the future, using our model it will be possible to predict mean maximum UHI intensity in other cities, which have land-use features similar to Szeged.Received September 26, 2002; revised February 25, 2003; accepted March 22, 2003 Published online July 30, 2003     

Barium-rich fluids and melts in a subduction environment (La Corea and Sierra del Convento mélanges,eastern Cuba)

Whole-rock compositions of muscovite-bearing amphibolite, trondhjemite, pegmatite and quartz-muscovite rocks from Sierra del Convento and La Corea mélanges (eastern Cuba), as well as mineralogy, record complex circulation of Ba-rich fluids and melts in the subduction environment. Partial melting of fluid-fluxed, MORB-derived amphibolite produced trondhjemite magmas that crystallized at depth, in some cases evolving into pegmatites. Qtz-Ms rocks probably crystallized from primary fluids derived from subducted sediments. All these rocks have elevated concentrations of large-ion lithophile elements, especially Ba (up to 11,810 ppm), presumably released from slab sediments by fluids and/or melts. Fluid–rock interaction produced crystallization of phengite in parental amphibolites. The phengite crystallized in all types of rocks is rich in Ba, with concentric zoning, characterized by Ba-rich cores and Ba-poor rims, indicating a compatible behaviour of Ba in the studied systems. Zoning in phengite is governed primarily by the celadonite (tschermak) exchange vector ((Mg,Fe)Si-(Al)_-2), with more moderate contributions of the celsian (BaAl-(KSi)_-1) and paragonite (NaK_-1) exchange vectors. Late remobilization of Ba at relatively low temperature formed retrograde celsian. The compatible behaviour of Ba in the studied rocks strengthens the importance of the stability of phengite for the transfer of LIL elements from the subduction to the volcanic arc environments.     

Small-strain behaviour of unsaturated silty clay: experiments and model interpretation

Acta Geotechnica - The experimental data dealing with the so-called small strain stiffness of soils are indispensable in developing and calibrating advanced numerical models. A literature review...     

Controls on the morphological evolution of embayed beaches: Morphometry versus external forcing

The morphological evolution of embayed beaches on a microtidal coast is assumed to largely respond to the degree of exposure to wave conditions, decreasing the mobility with increasing beach indentation (and vice versa). However, the number of sediment arrivals at the beach or the impact of extreme storms can modify this relationship. Here, we present an analysis of 10 embayed beaches along the Catalan coast with different morphometric and sedimentary characteristics to identify the most relevant parameters controlling the morphological evolution of these embayed beaches at the inter-annual and decadal scales. The study was mostly based on LiDAR topographic data collected from 2012 to 2017, aerial photographs from 1945 to 2021, sediment sampling and a long-term series analysis of the forcing parameters (waves, sea level, precipitation and land-use changes). The results show a net loss of volume on all the studied beaches at an inter-annual scale and a general shoreline retreat during the last few decades, suggesting the influence of common processes on the evolution of the studied beaches. Smaller pocket beaches with medium-to-high indentations are more sensitive to changes induced by local factors and show higher variability in the volume of the emerged beach and shoreline position than larger beaches. The most relevant factors influencing the evolution of the studied beaches on a decadal scale were identified as changes in sea level and the reduction in sediment inputs provided by streams due to land-use changes in the drainage basin. At the inter-annual scale, the impact of extreme events is the main factor controlling beach behaviour. These general trends can be opposite locally for beaches that receive large amounts of sediment via longshore transport from adjacent beaches.     

Shear wave crustal velocity model of the Western Bohemian Massif from Love wave phase velocity dispersion

We propose a new quantitative determination of shear wave velocities for distinct geological units in the Bohemian Massif, Czech Republic (Central Europe). The phase velocities of fundamental Love wave modes are measured along two long profiles (~200 km) crossing three major geological units and one rift-like structure of the studied region. We have developed a modified version of the classical multiple filtering technique for the frequency-time analysis and we apply it to two-station phase velocity estimation. Tests of both the analysis and inversion are provided. Seismograms of three Aegean Sea earthquakes are analyzed. One of the two profiles is further divided into four shorter sub-profiles. The long profiles yield smooth dispersion curves; while the curves of the sub-profiles have complicated shapes. Dispersion curve undulations are interpreted as period-dependent apparent velocity anomalies caused both by different backazimuths of surface wave propagation and by surface wave mode coupling. An appropriate backazimuth of propagation is found for each period, and the dispersion curves are corrected for this true propagation direction. Both the curves for the long and short profiles are inverted for a 1D shear wave velocity model of the crust. Subsurface shear wave velocities are found to be around 2.9 km/s for all four studied sub-profiles. Two of the profiles crossing the older Moldanubian and Teplá-Barrandian units are characterized by higher velocities of 3.8 km/s in the upper crust while for the Saxothuringian unit we find the velocity slightly lower, around 3.6 km/s at the same depths. We obtain an indication of a shear wave low velocity zone above Moho in the Moldanubian and Teplá-Barrandian units. The area of the Eger Rift (Teplá-Barrandian–Saxothuringian unit contact) is significantly different from all other three units. Low upper crust velocities suggest sedimentary and volcanic filling of the rift as well as fluid activity causing the earthquake swarms. Higher velocities in the lower crust together with weak or even missing Moho implies the upper mantle updoming.     

Stratiform and vein U,Mo and Cu mineralization in the Novoveská Huta area,CSFR

U-Mo and Cu mineralization occurs in horizons as well as in veins in the Permian formations near Novoveská Huta. Ore mineralization is represented by uraninite, U-Ti oxides, coffinite, molybdenite, chalcopyrite, tennantite and pyrite. The isotopic composition of S and C displays a larger variability in the stratiform ores (³⁴S from –32.7 to +2.7 and ¹³C from –27.1 to — 0.5) These data suggest mixing of meteoric solutions with fluids of volcanic origin and a complex history. There is a narrower range of ³⁴S from –18.8 to –4.6 and ¹³C from –6.3 to –2.5% in quartz-carbonate veins with Cu mineralization suggesting a deep source of ore-bearing solutions. The Permian volcanics were a significant source of ore elements.Their contents of U, Mo, Cu and Y are from two to eight times higher than in sedimentary rocks. Accumulations of ore elements in the horizons were formed by the reduction and adsorption processes 240 ± 30 Ma ago according to U-Pb isotopic dating. Due to Alpine tectonism, these low-grade ores (U<0.1 wt%) were remobilized and higher-grade U-Mo ores (U>0.1 wt%) were formed 130 ± 20 Ma ago at temperatures ranging from 110 to 120° C, according to fluid inclusions. Younger veins with Cu mineralization were formed 115 ± 10 Ma according to the model age of Pb at temperatures ranging from 95 to 190°C.     

Magnetic and structural study of the Eaux-Chaudes intrusion: understanding the Variscan deformation in the Western Axial Zone (Pyrenees)

The present study provides new magnetic and microstructural data for the Eaux-Chaudes granodioritic massif (Western Axial Zone, Pyrenees) and contributes to the understanding of its geometry, internal structure and emplacement mechanism. Moreover, the geological cross-sections and field data allow to reconstruct the evolution of the whole area from Variscan to Alpine times and to integrate the emplacement of the igneous body in the context of the Variscan orogeny. The Eaux-Chaudes pluton (301?±?9?Ma) is mainly composed by granodiorite, describing a normal compositional zoning and an approximately concentric arrangement that is consistent with the zonation of the low-field magnetic susceptibility. Magnetic foliation is subhorizontal in the inner part of the intrusion and becomes parallel to the petrographical contacts along pluton margins, roughly describing the geometry of the intrusion. Magnetic lineations are dominantly subhorizontal, with E–W to ENE–WSW directional maximum. The general parallelism between Variscan structures of the host rock and the geometry and magmatic fabric of the intrusion reveals a late syn-Variscan emplacement. The tectonic regime registered during magma emplacement is in agreement with an N–S shortening and an E–W stretching direction, consistent with the transpressive regime deduced for other Pyrenean intrusions. Alpine overprint produced a slight tilting in the southern part of the intrusion, but it can be considered that the original Variscan structure is basically unchanged.     

An overview of the Gulf of Batabanó (Cuba): Environmental features as revealed by surface sediment characterisation

The main environmental features of the Gulf of Batabanó, Cuba, Caribbean, were investigated through the analyses of surface sediments collected at 23 sites. In order to highlight the potential threats affecting the sedimentary compartment of this area, samples were analysed for: granulometry, mineralogy, heavy metals concentration (As, Cd, Cu, Mn, Ni, Pb, Zn), organic carbon, total nitrogen and radionuclides. Findings were compared with published data and “grey” literature.Results showed: granulometric homogeneity and a widespread carbonatic condition all over the gulf, probably due to stable bathymetry and lack of terrigenous input (except for the La Coloma basin); a rather pristine environment for what concerns heavy metals pollution, except for La Coloma where a large arsenic input was recorded; very low levels of natural and artificial radioactivity; a relevant quantity of sedimentary organic matter, providing biota with useful substrate for feeding and enhancing the food-web development while indirectly supplying lobster fisheries. Combined data highlighted the impact of the Dique Sur in reducing terrigenous input in the coastal area.Future studies should focus on dating of sediment cores for identifying and quantifying the changes acting in the gulf and on investigating the origins of the large arsenic input to La Coloma.