Analysis of digital elevation data for palaeosurfaces in south-western Sweden

A 3873-km² large rectangular area of the Precambrian basement in south-western Sweden has been investigated regarding gross morphology of palaeosurfaces. GIS and digital elevation data were used to construct maps of relative and absolute relief and E–W trending height profiles. Three different palaeosurfaces were recognised and delimited; the very even sub-Cambrian peneplain in the east at an intermediate altitudinal position, an uplifted and broken part of the sub-Cambrian peneplain in the centre at the highest present elevation, and in the western coastal areas a joint-aligned valley landscape with high relative relief, probably an exhumed Mesozoic etch-surface. Phanerozoic faulting has dissected the different palaeosurfaces into tectonic blocks, which are shown from trend surface analysis to be tilted in different directions and to different degrees, characteristic and decisive for the morphological development.     

Distribution of green algal mats throughout shallow soft bottoms of the Swedish Skagerrak archipelago in relation to nutrient sources and wave exposure

Distribution and biomass of green algal mats were studied in marine shallow (0–1 m) soft-bottom areas on the Swedish west coast from 1994 to 1996, by combining aerial photography surveys with ground truth sampling. Filamentous green algae, dominated by species of the genera Cladophora and Enteromorpha, were generally present throughout the study area during July and August, and largely absent in late April and early May. These algae occurred at 60 to 90% of the locations investigated during the summer, and were estimated to cover between 30 and 50% of the total area of shallow soft bottoms of the Swedish Skagerrak archipelago. The distributional patterns were similar during the three years of the investigation and appeared unrelated to annual local nutrient inputs from point sources and river discharge. We postulate that the apparent lack of such a relationship is due to an altered state of nutrient dynamics throughout the archipelago. Mechanisms are likely to involve long-term, diffuse elevations in nutrient levels in coastal waters of the Skagerrak and the Kattegat over several decades leading to current eutrophic conditions, exceeding nutrient requirements for abundant filamentous algal growth. Patterns of algal abundance in our study were largely related to physical factors such as exposure to wind, waves and water exchange under conditions where nutrient loads among embayments seemed to be unlimited. Further, our results show that sediments covered by algal mats had higher carbon and nitrogen contents than unvegetated sediments. We hypothesise that sustained high nutrient loads, manifested in extensive biomass of filamentous algae during summer months, are re-mineralised via decay and sedimentation in the benthic realm. Hence, accumulated carbon and nutrients in the sediment could, in turn, constitute the basic pool for future algal mat production overlying soft bottoms in areas where tidal exchange is limited.     

TWO-PHASE OIL MIGRATION IN COMPACTING SEDIMENTARY BASINS MODELLED BY THE FINITE ELEMENT METHOD

The upstream-weighted finite element method with lumped mass matrix is applied to the modelling of oil migration in compacting sedimentary basins. An implicit formulation is made in Lagrangian co-ordinates of a pressure, saturation and a temperature equation, which is based on immiscible two-phase flow of oil and water. The formulation accounts for the compaction of the sediments, the generation of oil from solid organic material (kerogen), the eventual pore space generated by kerogen breakdown, and the density variations of the fluids which may set up thermal convection. The model is validated by comparison with results from a one-dimensional (1D) fractional flow-based migration model. A 2D case example showing oil expulsion from source rocks, and the filling of a trap is presented. The mass balance of the model is easily checked because all oil in the basin originates from breakdown of kerogen. Compared with other alternatives, the simple upstream-weighted finite element method is suggested as a possible first choice for a numerical method for the modelling of oil migration in compacting sedimentary basins. It easily deals with the complex geometry of a basin, it yields reasonably good results, is simple to implement, and the same implementation applies to all spatial dimensions. © 1997 by John Wiley & Sons, Ltd.     

Modeling undertow due to random waves

A numerical model of undertow due to random waves is developed. The model includes three sub-models: (i) a model for multi-directional and multi-frequency random wave transformation, (ii) a surface roller evolution model, and (iii) a model for calculating the vertical distribution and the mean value of the undertow velocity. The calculation of wave trough level is performed based on a theory for the wave asymmetry. The model was successfully validated against small- and large-scale laboratory experiments. Thus, the model is expected to provide reliable input for the modeling of sediment transport and morphological change due to waves and currents.     

Fungal colonies in open fractures of subseafloor basalt

The deep subseafloor crust is one of the few great frontiers of unknown biology on Earth and, still today, the notion of the deep biosphere is commonly based on the fossil record. Interpretation of palaeobiological information is thus central in the exploration of this hidden biosphere and, for each new discovery, criteria used to establish biogenicity are challenged and need careful consideration. In this paper networks of fossilized filamentous structures are for the first time described in open fractures of subseafloor basalts collected at the Emperor Seamounts, Pacific Ocean. These structures have been investigated with optical microscopy, environmental scanning electron microscope, energy dispersive spectrometer, X-ray powder diffraction as well as synchrotron-radiation X-ray tomographic microscopy, and interpreted as fossilized fungal mycelia. Morphological features such as hyphae, yeast-like growth and sclerotia were observed. The fossilized fungi are mineralized by montmorillonite, a process that probably began while the fungi were alive. It seems plausible that the fungi produced mucilaginous polysaccharides and/or extracellular polymeric substances that attracted minerals or clay particles, resulting in complete fossilization by montmorillonite. The findings are in agreement with previous observations of fossilized fungi in subseafloor basalts and establish fungi as regular inhabitants of such settings. They further show that fossilized microorganisms are not restricted to pore spaces filled by secondary mineralizations but can be found in open pore spaces as well. This challenges standard protocols for establishing biogenicity and calls for extra care in data interpretation.     

A comparison of annual and seasonal carbon dioxide effluxes between sub-Arctic Sweden and High-Arctic Svalbard

Recent climate change predictions suggest altered patterns of winter precipitation across the Arctic. It has been suggested that the presence, timing and quantity of snow all affect microbial activity, thus influencing CO₂ production in soil. In this study annual and seasonal emissions of CO₂ were estimated in High-Arctic Adventdalen, Svalbard, and sub-Arctic Latnjajaure, Sweden, using a new trace gas-based method to track real-time diffusion rates through the snow. Summer measurements from snow-free soils were made using a chamber-based method. Measurements were obtained from different snow regimes in order to evaluate the effect of snow depth on winter CO₂ effluxes. Total annual emissions of CO₂ from the sub-Arctic site (0.662–1.487 kg CO₂ m^–2 yr^–1) were found to be more than double the emissions from the High-Arctic site (0.369–0.591 kg CO₂ m^–2 yr^–1). There were no significant differences in winter effluxes between snow regimes or vegetation types, indicating that spatial variability in winter soil CO₂ effluxes are not directly linked to snow cover thickness or soil temperatures. Total winter emissions (0.004–0.248 kg CO₂ m^–2) were found to be in the lower range of those previously described in the literature. Winter emissions varied in their contribution to total annual production between 1 and 18%. Artificial snow drifts shortened the snow-free period by 2 weeks and decreased the annual CO₂ emission by up to 20%. This study suggests that future shifts in vegetation zones may increase soil respiration from Arctic tundra regions.     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

Modelling thermal transients from magmatic underplating—an example from the Vøring margin (NE Atlantic)

The thermal impact of several kilometre-thick magmatic underplating in the lower continental crust is studied with analytical and numerical methods. Simple analytical solutions are derived for the thermal transient in the case of an infinite depth below the underplate and also for the case of a finite depth (down to the asthenosphere). It is shown that these solutions lead to simple approximations for when the transient surface heat flow is at its maximum, what the maximum is, and for how long the transient lasts. Even though these solutions assume that the underplate is emplaced instantaneously, they are useful in the interpretation of underplating over finite time spans. A numerical scheme is suggested for the modelling of underplating that handles both short time intervals as well as long intervals. The scheme treats magmatic underplating in a mass and energy conservative manner, and it is compared against the analytical solutions. Finally, the analytical and numerical results for thermal transients are applied to a transect from the Vøring margin (NE Atlantic), with respect to various degrees of early Cenozoic magmatic intrusion. It appears that more than half of the lower crustal body (LCB) in the Vøring margin must be magmatic underplating for the vitrinite reflectance to be substantially higher than for the non-magmatic case, where the LCB is assumed to comprise Caledonian crust.     

Indicators of road network vulnerability to storm-felled trees

In this paper, we exemplify the use of simple indicators of wind storm vulnerability of the road network that can be derived from existing geographic datasets. We point out the possible utilization of the datasets, applying GIS techniques, for highlighting road sections that, due to adjacency of high forest stands, are sensitive to closure by storm-felled trees. Indicators reflecting the reduced access to different areas or to the population in need of emergency aid can be derived based on the parameter tree height along roads and road network analysis. As a case in this study, the methodology is applied to elderly people (+80 years) with possible need of daily care at home following a severe storm. A comparison to the extreme 2005 storm felling in southern Sweden reveals that only limited estimates of road network disruption due to storm-felled trees are possible using the indicators, as other factors, for example, wind direction, which determine the exact impact of a particular storm are not taken into account. However, the indicators and network analysis also provide a possibility to draw attention to locations where disruptions of the road network would have significant effects on the accessibility to large surrounding areas. Potential critical road closures can be identified and preventive measures considered locally at these points.     

Phytoplankton life cycle transformations lead to species-specific effects on sediment processes in the Baltic Sea

In order to study the sediment response to different addition of organic matter, we added cultures of the dinoflagellates Scrippsiella hangoei and Woloszynskia halophila and the diatom Pauliella taeniata to aquaria containing natural sediment. The biomass added was 1550–3260 mg C m⁻², and in the control, no biomass was added (n=3). Oxygen profiles at the sediment–water interface and inorganic nutrients in the near bottom water were determined once a week. In the additions of P. taeniata and W. halophila the sediment quickly became anoxic, and subsequently there was a flux of >1 mmol PO₄³⁻ m⁻² d⁻¹ out of the sediment in these treatments. The majority of the released P came from P stored in the sediment and not from the organic phosphorus added. The result was very different for the S. hangoei addition. This species underwent a life cycle change to form temporary cysts. During this process there was a net uptake of nutrients. After the formation of cysts the concentration of inorganic nutrient was similar to that of the control. Cysts generally survive for long periods in the sediment (months to years) before germinating, but can also be permanently buried in the sediment. The novel idea presented here is that the phytoplankton composition may directly affect sediment processes such as oxygen consumption and phosphorus release, through species-specific life cycle changes and yields of resting stages produced prior to sedimentation. This can be an important aspect of nutrient cycling in eutrophic waters, like the Baltic Sea, where there is large year-to-year difference in the amount of resting stages settling at the sea floor, mainly due to differences in abundance of diatoms and dinoflagellates during the spring bloom. If yields of resting stages change, e.g. due to changes in the phytoplankton community, it may lead to alterations in the biogeochemical cycling of nutrients.