Insight into the marine controlled‐source electromagnetic signal propagation

In marine controlled‐source electromagnetic (CSEM) surveys the subsurface is explored by emitting low‐frequency signals from an electric dipole source close to the sea‐bed. The main goal is often to detect and describe possible thin resistive layers beneath the sea‐bed. To gain insight into how CSEM signals propagate, it is informative to study a stratified model. The electromagnetic field is then given in terms of integrals over TE‐ and TM‐polarized plane‐wave constituents. An asymptotic evaluation of the field integrals for large propagation distances results in explicit spatial expressions for the field components and the derived expressions can be used to analyse how the CSEM signals propagate. There are two major signal pathways in a standard CSEM model. One of these pathways is via the thin resistive layer and the resulting response is accounted for by a pole in the reflection response for the TM mode. The signal is propagating nearly vertically down to the resistor from the source, then guided while attenuated along the reservoir, before propagating nearly vertically up to the receiver. The response is slightly altered by the sea‐bed interface and further modified in shallow water due to multiple reflections between the sea‐surface and sea‐bed at both the source and receiver sides. The other major signal pathway is via the resistive air half‐space, the so‐called airwave. The airwave is generated by the TE mode and interacts with the subsurface via vertically propagating signals reflected between the sea‐surface and subsurface at both the source and receiver sides.     

Luminescence dating of buried cobble surfaces from sandy beach ridges: a case study from Denmark

Here we investigate the use of optically stimulated luminescence (OSL) for dating cobbles from the body of successive beach ridges and compare cobble surface‐derived ages to standard quartz OSL ages from sand. Between four and eight cobbles and sand samples (age control) were dated with the luminescence method, taken from the modern beach and from beach ridges on the south and north extremes of a prograding spit on the westernmost coast of Lolland, Denmark. Luminescence‐depth profiles perpendicular to the surfaces of the cobbles show that the feldspar infrared signals stimulated at 50 °C were fully reset to various depths into the cobbles prior to final deposition; as a result, the equivalent doses determined from close to the surface of such cobbles can be used to calculate burial ages. Beach‐ridge burial ages given by the average of ages of individual cobbles taken from the same site are consistent, within errors, with the ages derived from the sand samples. Cobble‐ and sand‐derived ages show that the southernmost beach ridge at Albuen was formed around 2 ka ago, indicating that this sandy spit is younger than other coastal systems in Denmark. The agreement between ages derived from clasts and from standard quartz OSL in this study confirms that, even in the absence of sandy sediments, we can reliably date sites using OSL by targeting larger clasts. In addition, the record of prior light exposure contained in the shape of the cobbles’ luminescence‐depth profile removes one of the major uncertainties (i.e. the degree of signal reset prior to burial) in the luminescence dating of high latitude sites.     

Seismic geomorphology and growth architecture of a Miocene barrier reef,Browse Basin,NW-Australia

The Cenozoic succession of Browse Basin is characterized by a carbonate system, that developed from a non-tropical ramp in Eocene-lower Miocene times to a tropical rimmed platform in the middle Miocene. The evolution of the platform was unraveled through the interpretation of the seismic geomorphology and borehole data of the middle Miocene tropical reef system. The first reef structures developed during the early middle Miocene as narrow linear reef belts with an oblique orientation with respect to shelf strike direction. Subsequently, they prograded toward the platform margin to form a barrier reef with a minimum length of 40 km. The barrier reef itself comprises three distinct ridges separated by progradational steps. The second and third step are separated by a karstified horizon, which is interpreted to represent the global sea-level fall shortly before the Serravallian/Tortonian boundary. The following third ridge formed in a slightly downstepped position during the sea-level lowstand and initial transgressive phase. Further sea-level rise during the early Tortonian first drowned the barrier-reef system and subsequently also the patch reefs and relic atolls that had established in a backstepped position in the platform interior. The similar evolution of the Browse Basin reef system and other contemporaneous carbonate systems indicates a strong impact of eustatic sea-level changes. Relatively large subsidence rates in the study area possibly augmented the eustatic sea-level rise in the Tortonian and hence contributed to the drowning of the reef system. However, the initiation and final demise of the reef system was also governed by global and regional climate variations. The first seismically-defined reefs developed simultaneous to a maximum in the transport capacity of the Indonesian throughflow, which brings warm low-salinity waters to the North-West Shelf. Reef drowning followed the restriction of this seaway close to the middle to early Miocene boundary. This near closure of the Indonesian seaway possibly led to a regional amplification of the global middle to late Miocene cooling trend and hampered the potential of the reef system to keep up with the rising sea-level.     

The BEEP project in the Baltic Sea: overview of results and outline for a regional biological effects monitoring strategy

Field studies in the framework of the EU funded BEEP project (Biological Effects of Environmental Pollution in Marine Coastal Ecosystems, 2001-2004) aimed at validating and intercalibrating a battery of biomarkers of contaminant exposure and effects in selected indicator species in the Mediterranean, the North Atlantic and the Baltic Seas. Major strategic goals of the BEEP project were the development of a sensitive and cost-efficient biological effects monitoring approach, delivery of information and advice to end-user groups, and the implementation of a network of biomarker researchers around Europe. Based on the main results obtained in the Baltic Sea component of the BEEP the present paper summarises and assesses the applicability of biomarkers for different regions and species in this sea area. Moreover, a general strategy and some practical considerations for the monitoring of biological effects in the Baltic Sea are outlined.     

Developmental disorders in larvae of eelpout (Zoarces viviparus) from German and Swedish Baltic coastal waters

Pregnant eelpout were collected for several years at German and Swedish Baltic coastal stations with different impact of pollutants and the prevalence of fry abnormalities compared between sites. Mortality of apparently normal developed larvae was observed with high variability in both German and Swedish sites. Malformation of larvae was a prominent disorder at all German stations with a prevalence ranging from about 50% up to a maximum of 90% in almost all analysed samples. At the Swedish stations malformation rates were significantly lower (range: 0-6%). Growth retardation of fry was clearly more prominent in eelpout from German coastal waters as well. Taken together the field data suggests that impaired larval development was associated with the state of environmental pollution at the sampling locations.     

Internal architecture of a raised beach ridge system (Anholt,Denmark) resolved by ground-penetrating radar investigations

The internal architecture of raised beach ridge and associated swale deposits on Anholt records an ancient sea level. The Holocene beach ridges form part of a progradational beach ridge plain, which has been interpreted to have formed during an isostatic uplift and a relative fall in the sea level over the past 7700 years. The ridges are covered by pebbles and cobbles and commonly show evidence of deflation. Material presumably removed from the beach ridges and adjacent swales form the present dune forms on Anholt. Ground-penetrating radar (GPR) reflection lines have been collected with 250 MHz shielded antennae across the fossil ridge and swale structures. The signals penetrate the subsurface to a maximum depth of ～ 10 m below the fossil features. The GPR data resolve the internal architecture of the beach ridges and swales with a vertical resolution of about 0.1 m. GPR mapping indicates that the Holocene beach ridges are composed of seaward-dipping beachface deposits as well as minor amounts of inland dipping deposits of wash-over origin. The beachface deposits downlap on underlying shoreface deposits, and we use these surfaces as markers of a relative palaeo-sea level. The new data indicate that the highest relative sea level at about 8.5 m was reached 6500 years ago; 700 years later the relative sea level had dropped 0.7 m indicating a change in the relative sea level around 1 mm/year. This fall in the relative sea level most likely records the influence of an isostatic rebound causing younger beach ridge deposits to indicate lower sea levels.     

(Na,Ca)(Ti3+,Mg)Si2O6-clinopyroxenes at high pressure: influence of cation substitution on elastic behavior and phase transition

A compressional study of (Na,Ca)(Ti³⁺,Mg)Si₂O₆-clinopyroxenes was carried out at high pressures between 10⁻⁴ and 10.2 GPa using in situ single-crystal X-ray diffraction, Raman spectroscopy and optical absorption spectroscopy. Compressional discontinuities accompanied by structural changes, in particular, the appearance of two distinct Ti³⁺–Ti³⁺ distances within the octahedral chains at 4.37 GPa, provide evidence for the occurrence of a phase transition in NaTi³⁺Si₂O₆. Equation-of-state parameters are K ₀ = 115.9(7) GPa with K′ = −0.9(3) and K ₀ = 102.7(8) GPa with K′ = 4.08(5) for the low- and high-pressure range, respectively. The transition involves a C2/c–P [`1] \overline{1} symmetry change, which can be confirmed by the occurrence of new modes in Raman spectra. Since no significant discontinuity in the evolution of the unit-cell volume with pressure has been observed, the transition appears to be second-order in character. The influence of the coupled substitution Na⁺Ti³⁺↔Ca²⁺Mg²⁺ on the static compression behavior and the structural stability has been investigated using a sample of the intermediate composition (Na_0.54Ca_0.46)(Mg_0.46Ti_0.54)Si₂O₆. No evidence for a deviation from continuous compression behavior has been found, neither in lattice parameter nor in structural data and the fit of a third-order Birch–Murnaghan equation-of-state to the pressure–volume data yields a bulk modulus of K ₀ = 109.1(5) GPa and K′ = 5.02(13). Raman and polarized absorption spectra have been compared to NaTiSi₂O₆ and reveal major similarities. The main driving force for the phase transition in NaTi³⁺Si₂O₆ is the localization of the Ti³⁺ d-electron and the accompanying distortion, which is suppressed in the (Na,Ca)(Ti³⁺,Mg)Si₂O₆-clinopyroxene.     

Towards integrated governance for water, health and social–ecological systems: The watershed governance prism

This article proposes a shift toward the integrated governance of watersheds as a basis for fostering health, sustainability and social–ecological resilience. The authors suggest that integrated watershed governance is more likely when different perspectives, including health and well-being, are explicitly understood, communicated, and sought as co-benefits of watershed management. A new conceptual device – the watershed governance prism – is introduced in relation to the multiple facets of governance that characterize contemporary water resources management and examined as an integrative framework to link social and environmental concerns with the determinants of health in the watershed context. The authors assess the diagnostic and communicative potential of such a framework, discussing its utility as a concise depiction of multiple, interacting policy priorities and as a guide to integrate different research and policy domains into the governance of water, health and social–ecological systems.     

Transgressive dune formation along a cliffed coast at 75 ka in Sardinia,Western Mediterranean: a record of sea‐level fall and increased windiness

Transgressive dunes develop frequently along strandplain coastlines; however, they may also form along rocky coasts dominated by cliffs and embayments. Two lithified transgressive dune systems developed along the cliffed Alghero coast (NW Sardinia, Italy) have been investigated. One aeolian system forms a cliff‐front anchored aeolian dune accumulation; the other is a valley‐head anchored sand‐ramp system. Optically stimulated luminescence ages indicate that both systems formed around 75 ka. This period, which corresponds to the beginning of MIS 4, was characterized by a relatively low sea‐level stand (15 m below the present sea level) and was preceded by a sea‐level highstand (+1 m asl) around 81 ka (MIS 5a). Our results show that this rapid sea‐level fall exposed an enormous amount of marine sand, which was transported inland by strong northerly winds and deposited in front of cliffs or in valley heads. Therefore, sediment supply and sea‐level fall seem to be critical factors controlling dune formation along rocky coasts, which generate time‐transgressive aeolianites. Terra Nova, 00, 000–000, 2010     

Particle sedimentation patterns in the eastern Fram Strait during 2000–2005: Results from the Arctic long-term observatory HAUSGARTEN

Since 2000 long-term measurements of vertical particle flux have been performed with moored sediment traps at the long-term observatory HAUSGARTEN in the eastern Fram Strait (79°N/4°E). The study area, which is seasonally covered with ice, is located in the confluence zone of the northward flowing warm saline Atlantic water with cold, low salinity water masses of Arctic origin. Current projections suggest that this area is particularly vulnerable to global warming. Total matter fluxes and components thereof (carbonate, particulate organic carbon and nitrogen, biogenic silica, biomarkers) revealed a bimodal seasonal pattern showing elevated sedimentation rates during May/June and August/September. Annual total matter flux (dry weight, DW) at ～300 m depth varied between 13 and 32 g m^?2 a^?1 during 2000 and 2005. Of this total flux 6–13% was due to CaCO₃, 4–21% to refractory particulate organic carbon (POC), and 3–8% to biogenic particulate silica (bPSi). The annual flux of all biogenic components together was almost constant during the period studied (8.5–8.8 g m^?2 a^?1), although this varied from 27% to 67% of the total annual flux. The fraction was lowest in a year characterized by the longest duration of ice coverage (91 and 70 days for the calendar year and summer season, May–September, respectively). Biomarker analyses revealed that organic matter originating from marine sources was present in excess of terrigenious material in the sedimented matter throughout most of the study period. Fluxes of recognizable phyto- and protozooplankton cells amounted up to 60×10⁶ m^?2 d^?1. Diatoms and coccolithophorids were the most abundant organisms. Diatoms, mainly pennate species, dominated during the first years of the investigation. A shift in the composition occurred during the last year when numbers of diatoms declined considerably, leading to a dominance of coccolithoporids. This was also reflected in a decrease in the sedimentation of bPSi. The sedimentation of biogenic matter, however, did not differ from the amount observed during the previous years. Among the larger organisms, pteropods at times contributed significantly to both the total matter and CaCO₃, fluxes.