The positions of H+, Li+ and Na+ impurities in beryl

Electron Paramagnetic Resonance (EPR) measurements show that Li⁺ impurities are located at two different positions in beryl, one in the crystal lattice and the other in the crystal channel. The position of the Li⁺ impurity in the lattice is generally assumed to be at the site of a missing Be²⁺ ion. It is shown that this is not the case, but that the Li⁺ ion is located in a tetrahedron formed by the oxygens of one side of the Be tetrahedron and the nearest oxygen in the channel ring. This Li site has the coordinates (0.423, 0.344, 0.167) and can only be occupied when the neighbouring Be site is empty. There are four such sites around every Be tetrahedron at the distance of 1.46 Å from the Be site. The distance from the Li site to the oxygens of the Li tetrahedron is 1.84 Å. This compares favourably with the much smaller distance of 1.65 Å in the Be tetrahedron. Protons in beryl are trapped at or near these Li sites. Na⁺ is known to be located at the 2b position at the center of the silicate rings, where it is stabilized by one water molecule located at each of the two surrounding 2a sites. This is also the position of Li⁺ in the beryl channel. It is found that the presence of Na⁺ in the ring of six oxygens reduces the radius of this ring. The Na⁺ impurity has also been supposed to be located at position 2a alone and at 2b stabilized by only one water molecule. It is now proposed that Na⁺ and H₂O are located together in the Al–Be plane when only one water molecule is associated with Na⁺. The water oxygen is located at or near 2a and Na is closer to the Be site in tetrahedral beryl and closer to the Al site in octahedral beryl. It is proposed that the water protons are also located in the Al–Be plane, which would mean that there exists a third type of water in beryl. The origin of protons and OH^? ions in beryl is discussed and it is suggested that the plugs in the beryl channels are CO ₃ ^2? ions. Diffusion of OH^? ions and natural radiation may have led to the creation of NO₃ and the blue colour of Maxixe beryl.     

On the impact of wind on the development of wave field during storm Britta

The observation of extreme waves at FINO 1 during storm Britta on the 1st November 2006 has initiated a series of research studies regarding the mechanisms behind. The roles of stability and the presence of the open cell structures have been previously investigated but not conclusive. To improve our understanding of these processes, which are essential for a good forecast of similarly important events offshore, this study revisits the development of storm Britta using an atmospheric and wave coupled modeling system, wind and wave measurements from ten stations across the North Sea, cloud images and Synthetic Aperture Radar (SAR) data. It is found here that a standard state-of-the-art model is capable of capturing the important characteristics of a major storm like Britta, including the storm path, storm peak wind speed, the open cells, and peak significant wave height (H _s ) for open sea. It was also demonstrated that the impact of the open cells has negligible contribution to the development of extreme H _s observed at FINO 1. At the same time, stability alone is not sufficient in explaining the development of extreme H _s . The controlling conditions for the development of Britta extreme H _s observed at FINO 1 are the persistent strong winds and a long and undisturbed fetch over a long period.     

Geoscientific R&D for high level radioactive waste disposal in Sweden — current status and future plans

SKB (Svensk Kärnbränslehantering AB) is responsible for all handling, transport and storage of the nuclear wastes outside the Swedish nuclear power stations. According to Swedish law, SKB is responsible for an R&D-programme needed to take care of the radwastes. The programme comprises, among others, a general supportive geo-scientific R&D and the Äspö Hard Rock Laboratory (HRL) for more in-situ specific tasks.

Sweden is geologically located in the Fennoscandian shield which is dominated by gneisses and granitoids of Precambrian age. The Swedish reference repository concept thus considers an excavated vault at ca. 500 m depth in crystalline rocks. In this concept (KBS-3), copper canisters with high level waste will be emplaced in deposition holes from a system of tunnels. Blocks of highly compacted swelling bentonite clay are placed in the holes leaving ample space for the canisters. At the final closure of the repository, the galleries are backfilled with a mixture of sand and bentonite. This repository design aims to make the disposal system as redundant as possible. Although the KBS-3 concept is the reference concept, alternative concepts and/or repository lay-outs are also studied. The main alternative, currently under development at SKB, is disposal in boreholes with depths of 4–5 km. The geoscientific research will to a great extent be guided by the demands posed by the performance and safety assessments, as well as the constuctability issues. Some main functions of the geological barrier are fundamental for the long-term safety of a repository. These are: bedrock mechanical stability, a chemically stable environment as well as a slow and stable groundwater flux. The main time-table for the final disposal of long-lived radioactive waste in Sweden foresees the final selection of the disposal system and site during the beginning of next decade.     

Suspension and calibration of a sediment trap

The aim of this technical note is to introduce a new, simple construction of a buoy-carried, suspended sediment trap that meets given demands concerning design (geometry of vessels) and stability during the registration period. The device is based on a ball-and-socket joint in the center and two Plexiglas cylinders (D=5cm, H=30cm) on PVC plastic arms. The suspension consists of only three parts. To determine the optimal construction, the apparatus has been calibrated in a circulating flume at various water velocities.     

Effects on UDP glucuronosyl transferase, glutathione transferase, DT-diaphorase and glutathione reductase activities in rainbow trout liver after long-term exposure to PCB

In the present study, long-term exposure to PCB resulted in marked induction of the xenobiotic biotransformation enzymes UDP glucuronosyl transferase, glutathione transferase and DT-diaphorase (measured as menadione reductase and DCPIP reductase) in rainbow trout 15 or 20 weeks post-injection during the experimental period. The increase of the phase II enzymes were paralleled by a marked increase of the glutathione reductase activity. These results indicate that prolonged exposure to PCB results in increased production of organo-radicals.     

Glacial and environmental changes over the last 60 000 years in the Polar Ural Mountains,Arctic Russia,inferred from a high‐resolution lake record and other observations from adjacent areas

Our knowledge about the glaciation history in the Russian Arctic has to a large extent been based on geomorphological mapping supplemented by studies of short stratigraphical sequences found in exposed sections. Here we present new geochronological data from the Polar Ural Mountains along with a high‐resolution sediment record from Bolshoye Shchuchye, the largest and deepest lake in the mountain range. Seismic profiles show that the lake contains a 160‐m‐thick sequence of unconsolidated lacustrine sediments. A well‐dated 24‐m‐long core from the southern end of the lake spans the last 24 cal. ka. From downward extrapolation of sedimentation rates we estimate that sedimentation started about 50–60 ka ago, most likely just after a large glacier had eroded older sediments from the basin. Terrestrial cosmogenic nuclide (TCN) exposure dating (¹⁰Be) of boulders and Optically Stimulated Luminescence (OSL) dating of sediments indicate that this part of the Ural Mountains was last covered by a coherent ice‐field complex during Marine Isotope Stage (MIS) 4. A regrowth of the glaciers took place during a late stage of MIS 3, but the central valleys remained ice free until the present. The presence of small‐ and medium‐sized glaciers during MIS 2 is reflected by a sequence of glacial varves and a high sedimentation rate in the lake basin and likewise from ¹⁰Be dating of glacial boulders. The maximum extent of the mountain glaciers during MIS 2 was attained prior to 24 cal. ka BP. Some small present‐day glaciers, which are now disappearing completely due to climate warming, were only slightly larger during the Last Glacial Maximum (LGM) as compared to AD 1953. A marked decrease in sedimentation rate around 18–17 cal. ka BP indicates that the glaciers then became smaller and probably disappeared altogether around 15–14 cal. ka BP.     

Attenuation Correction Procedures for Water Vapour Fluxes from Closed-Path Eddy-Covariance Systems

Evapotranspiration is a source of water vapour to the atmosphere, and as a crucial indicator of landscape behaviour its accurate measurement has widespread implications. Here we investigate errors that are prevalent and systematic in the closed-path eddy-covariance measurement of latent heat flux: the attenuation of fluxes through dampened cospectral power at high frequencies. This process is especially pronounced during periods of high relative humidity through the adsorption and desorption of water vapour along the tube walls. These effects are additionally amplified during lower air temperature conditions. Here, we quantify the underestimation of evapotranspiration by a closed-path system by comparing its flux estimate to simultaneous and adjacent measurements from an open-path sensor. We apply models relating flux loss to relative humidity itself, to the lag time of the cross-correlation peak between the water vapour and vertical wind velocity signals, and to models of cospectral attenuation relative to the cospectral power of simultaneous sensible heat-flux measurements. We find that including the role of temperature in modifying the attenuation–humidity relationship is essential for unbiased flux correction, and that physically based cospectral attenuation methods are effective characterizers of closed-path instrument signal loss relative to the unattenuated flux value.     

Diversity-accuracy assessment of multiple classifier systems for the land cover classification of the Khumbu region in the Himalayas

Land cover classification of mountainous environments continues to be a challenging remote sensing problem,owing to landscape complexities exhibited by the regi...     

Reservoir description using dynamic parameterisation selection with a combined stochastic and gradient search

There is a correspondence between flow in a reservoir and large scale permeability trends. This correspondence can be derived by constraining reservoir models using observed production data. One of the challenges in deriving the permeability distribution of a field using production data involves determination of the scale of resolution of the permeability. The Adaptive Multiscale Estimation (AME) seeks to overcome the problems related to choosing the resolution of the permeability field by a dynamic parameterisation selection. The standard AME uses a gradient algorithm in solving several optimisation problems with increasing permeability resolution. This paper presents a hybrid algorithm which combines a gradient search and a stochastic algorithm to improve the robustness of the dynamic parameterisation selection. At low dimension, we use the stochastic algorithm to generate several optimised models. We use information from all these produced models to find new optimal refinements, and start out new optimisations with several unequally suggested parameterisations. At higher dimensions we change to a gradient-type optimiser, where the initial solution is chosen from the ensemble of models suggested by the stochastic algorithm. The selection is based on a predefined criterion. We demonstrate the robustness of the hybrid algorithm on sample synthetic cases, which most of them were considered insolvable using the standard AME algorithm.     

The Barents Sea Ice Sheet — A model of its growth and decay during the last ice maximum

On the basis of geomorphological and sedimentological data, we believe that the entire Barents Sea was covered by grounded ice during the last glacial maximum. ¹⁴C dates on shells embedded in tills suggest marine conditions in the Barents Sea as late as 22 ka BP; and models of the deglaciation history based on uplift data from the northern Norwegian coast suggest that significant parts of the Barents Sea Ice Sheet calved off as early as 15 ka BP. The growth of the ice sheet is related to glacioeustatic fall and the exposure of shallow banks in the central Barents Sea, where ice caps may develop and expand to finally coalesce with the expanding ice masses from Svalbard and Fennoscandia.The outlined model for growth and decay of the Barents Sea Ice Sheet suggests a system which developed and existed under periods of maximum climatic deterioration, and where its growth and decay were strongly related to the fall and rise of sea level.