典型矿区尾矿库特征污染物识别研究

通过对典型尾矿库土壤样品分析,利用重金属超标率、植物体BCF、污染因子的权重值筛选等通进行典型污染物识别,为开展尾矿库污染治理工作提供依据。     

基于面向对象分类的稀土开采区遥感信息提取方法研究

离子吸附型稀土矿是我国宝贵的矿产资源,运用遥感影像分类技术提取稀土开采区可以准确地实现对稀土开采状况的监测,但仅利用光谱信息往往难以保证分类精度。本文以江西寻乌稀土矿区为研究区,以IKONOS影像为数据源,应用面向对象分类方法提取了稀土开采区的遥感信息。针对稀土开采区的分布特点,选择基于边缘的分割算法进行影像分割;结合地形信息、光谱信息及几何信息建立规则集,进行特征提取;最后采用隶属度函数法实现面向对象分类,并与传统的光谱角填图分类进行对比分析。研究结果表明,面向对象分类法提取稀土开采区的总体精度为92.49%,Kappa系数为0.857 6,与传统监督分类方法相比有了很大的提高。     

基于OGRE的三维场景可视化关键技术研究

OGRE是面向对象图形渲染的开源三维渲染引擎,具有面向场景和易扩展等特点。本文系统研究了基于OGRE三维渲染引擎的任意场景三维可视化的诸多关键技术,并以某学校为例,采用Sketch Up建模,以Microsoft Visual Studio 2010为开发环境,使用C++作为编程语言,最终实现了校园三维场景的三维可视化模拟和漫游等功能。     

冻土机械切削破碎机理的研究进展

冻土开挖困难、破碎效率低是高寒地区工程建设、地基施工等面临的技术难题。冻土机械切削破碎是冻土开挖的主要方法,其机理研究是提高冻土破碎效率的前提和基础。首先总结了温度、含水率、围压等对冻土复杂力学特性的影响,进而调研分析了冻土机械切削破碎的典型切削力学模型,发现冻土切削机械破碎模式不仅与冻土力学特性密切相关,也与切削参数和刀具结构直接相关,冻土切削过程中存在着最优的切削前角（30°~60°）,且深切削和浅切削时冻土内部受力方式存在差异也会导致破坏形式的不同;温度、含水率、围压所造成的冻土力学性能变化会直接导致冻土破坏过程和切削破碎机理的改变,冻土强度随着温度降低表现出先升高然后保持稳定的特性,随着含水率升高呈现出先升高后降低的趋势,冻土破碎存在脆性、塑脆过渡及塑性等不同破坏形式。通过系统总结冻土切削破碎机理研究进展,进一步明确了冻土力学性质主要影响因素、变化特点及其切削破坏损伤特征,为冻土机械切削破碎的切削参数和切削具结构优化提供了设计依据。     

巴拿马海道关闭及其古海洋和古气候影响

位于中关洲的巴拿马海道曾是连通赤道东太平洋和大西洋的开放洋流通道。从中新世开始,巴拿马海道在构造运动的驱动下逐步关闭,切断了赤道太平洋和大西洋海水的直接交流。海道的关闭不仅改变了太平洋和大西洋海水的物理性质和洋流模式,还可能对新生代中晚期气候变化,特别是北半球大冰期的开始有重要作用。简要综述了二十余年来围绕巴拿马海道关闭及其古海洋、古气候意义方面的研艽成果和最新研究进展。很多相关的问题目前仍处于激烈的争论之中或尚未得到充分的认识,亟待开展进一步工作。开展相关研究将对促进我国古海洋和古气候研究具有积极意义,并有助于进一步加深我们对于海洋一气候系统的认识。     

波纹开缝翅片管换热器传热与流动性的数值模拟

提出一种波纹开缝翅片管换热器,对其传热与流动特性进行三维数值模拟,选择Re范围在1 000到5 000时与平板开缝翅片的模拟相比较。结果表明,在Re小于2 752时,平板开缝比波纹开缝的换热效果好,而Re大于2 752时,波纹开缝比平板开缝换热效果更好,并且波纹开缝翅片管换热器的流动阻力小于平板开缝,因此,Re大于2 752时波纹开缝比平板开缝综合效果更好。     

Application on drilling parameter monitor in drilling engineering monitoring

The drilling parameter monitor is an important tool in drilling engineering applied to monitoring drilling process, carrying out scientific analysis and decision-making. Based on discussing the present development situation of the domestic and foreign drilling machine parameter monitors, the metering scheme for vehicle-loaded drilling parameter monitor was designed. By using detection system for MSP430 single-chip microcomputer (SCM) in combination with peripheral circuit such as sensors, the drilling-rig control system was obtained to detect, and for every parameter in real-time display in order to keep operating the drilling rig status. The experiment shows that the drilling parameter monitor reaches design requirements and can be applied to drilling engineering monitoring, which has characters such as simple structure, high credibility and low cost.     

基于GNSS方位辅助惯性导航系统的水下地形精密测量技术

多波束测深技术是目前水下地形测量的主要技术手段,测量平台的瞬时姿态及方位是影响多波束测深系统最终成果准确度的重要因素。GNSS方位辅助惯性导航系统,作为目前应用较为广泛的方位、姿态、及位置综合测量系统,不仅能够提供高精度位置信息,同时也能提供测量平台的瞬时姿态及方位数据,而且因为具有GNSS方位辅助测量,使得最终方位测量结果比传统方位测量精度大大提高,这对于多波束最终测量成果精度提高具有重要意义。文中从GNSS方位辅助惯性导航系统原理及技术优势出发,结合Trimble RTX后处理技术,从姿态测量、方位测量及辅助高程测量方面分析了在多波束水下地形测量中的应用,并以实际测量成果来展现其在水下地形精密测量技术方面的优势,结果显示,定位精度可以达到优于2 cm级别,方位精度可以优于0.01°(依赖于双GNSS天线之间的基线长度),该技术对水下地形测量准确度提升作用显著。     

Isolation of protein from Chlorella sorokiniana CY1 using liquid biphasic flotation assisted with sonication through sugaring-out effect

Microalgae,a sustainable source of multi beneficial components has been discovered and could be utilised in pharmaceutical,bioenergy and food applications.This study aims to investigate the sugaring-out effect on the recovery of protein from wet green microalga,Chlorella sorokiniana CY1 which was assisted with sonication.A comparison of monosaccharides and disaccharides as one of the phaseforming constituents shows that the monosaccharides,glucose was the most suitable sugar in forming the phases with acetonitrile to enhance the production of protein(52% of protein).The protein productivity of microalgae was found to be significantly influenced by the volume ratio of both phases,as the yield of protein increased to 77%.The interval time between the sonication as well as the sonication modes were influencing the protein productivity as well.The optimum protein productivity was obtained with 10s of resting time in between sonication.Pulse mode of sonication was suitable to break down the cell wall of microalgae compared to continuous mode as a lower protein yield was obtained with the application of continuous mode.The optimum condition for protein extraction were found as followed:200g/L glucose as bottom phase with volume ratio of 1:1.25,10s of resting time for ultrasonication,5s of ultrasonication in pulse mode and 0.25g of biomass weight.The high yield of protein about 81% could be obtained from microalgae which demonstrates the potential of this source and expected to play an important role in the future.