Tilt measurements in western Canada

Pairs of short baselength mercury-level tiltmeters mounted on shallow piers coupled to sedimentary rocks have been used to monitor ground tilting at three inland locations in western Canada. Noise levels have been estimated over large Nyquist intervals to evaluate site conditions and for comparison with results observed in crystalline rocks at other locations. The results show that tilt noise patterns are similar for different locations, and that noise levels are higher for unconsolidated sediments. Tidal estimates for the principal lunar semidiurnal constituentM ₂ were obtained from the least noisy sections of the tilt series. Uncertainties in the estimated amplitudes for the record lengths considered range from 4 to 20% depending on location and azimuth. Comparison of the observedM ₂ tide with those predicted for an elastic Earth loaded by two different ocean configurations (Schwiderski or Parke) shows better agreement with the Schwiderski marine tidal model. Differences between observaton and theory suggest a strain-induced perturbation source.     

In Situ Biorestoration as a Ground Water Remediation Technique

In situ biorestoration, where applicable, is indicated as a potentially very cost-effective and environmentally acceptable remediation technology. Many contaminants in solution in ground water as well as vapors in the unsaturated zone can be completely degraded or transformed into new compounds by naturally occurring indigenous microbial populations. Undoubtedly, thousands of contamination events are remediated naturally before the contamination reaches a point of detection. The need is for methodology to determine when natural biorestoration is occurring, the stage the restoration process is in, whether enhancement of the process is possible or desirable, and what will happen if natural processes are allowed to run their course.
In addition to the nature of the contaminant, several environmental factors are known to influence the capacity of indigenous microbial populations to degrade contaminants. These factors include dissolved oxygen, pH, temperature, oxidation-reduction potential, availability of mineral nutrients, salinity, soil moisture, the concentration of specific pollutants, and the nutritional quality of dissolved organic carbon in the ground water.
Most enhanced in situ bioreclamation techniques available today are variations of hydrocarbon degradation procedures pioneered and patented by Raymond and coworkers at Suntech during the period 1974 to 1978. Nutrients and oxygen are introduced through injection wells and circulated through the contaminated zone by pumping one or more producing wells.
The limiting factor in remediation technology is getting the contaminated subsurface material to the treatment unit or units, or in the case of in situ processes, getting the treatment process to the contaminated material. The key to successful remediation is a thorough understanding of the hydrogeologic and geochemical characteristics of the contaminated area.     

Strontium isotopic equilibration during metamorphism of tillites from the Ogcheon Belt,South Korea

The NE/SW trending Ogcheon Belt formed during the Mesozoic by deformation and metamorphism of a sedimentary sequence which includes tillite formations of late Precambrian or Lower Palaeozoic age. In this study Rb-Sr isotopic data are reported from cm-scale sampling of clasts and matrix in these tillites, which underwent metamorphism at grades ranging from the biotite zone to the kyanite zone. Sr-isotopic disequilibrium between clasts and matrix persists up to the highest grade but in four out of five rocks the matrix samples approximate to isochrons (MSWD's<12). The mechanism for this selective isotopic equilibration is considered to be related to the metamorphic reactions in the matrix, which were probably accompanied by a substantial fluid flow. The matrix isochrons for three of the rocks, together with separated white micas from associated schists, suggest that metamorphism took place in the Trias, approximately 200 Myr ago. Metamorphism was followed by slow cooling and biotite closure temperatures were not reached until 190-150 Myr. — These results suggest that where high fluid/rock ratios can be demonstrated on independent petrological grounds, the analysis of small-scale whole-rock samples may allow effective Rb/Sr dating of metamorphism.     

Geochemistry of great Salt Lake,Utah II: Pleistocene-Holocene evolution

Sedimentologic and biostratigraphic evidence is used to develop a geochemical model for Great Salt Lake, Utah, extending back some 30,000 yrs. B.P. Hydrologie conditions as defined by the water budget equation are characterized by a lake initially at a low, saline stage, rising by about 17,000 yrs. B.P. to fresh water basin-full conditions (Bonneville level) and then, after about 15,000 yrs. B.P., dropping rapidly to a saline stage again, as exemplified by the present situation.Inflow composition has changed through time in response to the hydrologie history. During fresh-water periods high discharge inflow is dominated by calcium bicarbonate-type river waters; during saline stages, low discharge, NaCl-rich hydrothermal springs are significant solute sources. This evolution in lake composition to NaCl domination is illustrated by the massive mirabilite deposition, free of halite, following the rapid drawdown until about 8,000 years ago, while historic droughts have yielded principally halite.Hydrologic history can be combined with inferred inflow composition to derive concentration curves with time for each major solute in the lake. Calcium concentrations before the drawdown were controlled by calcite solubility, and afterwards by aragonite. Significant amounts of solutes are removed from the lake by diffusion into the sediments. Na⁺, Cl^? and SO₄^2? are also involved in salt precipitation. By including pore fluid data, a surprisingly good fit has been obtained between solute input over the time period considered and the amounts actually found in lake brines, pore fluids, salt beds and sediments. Excess amounts are present for calcium, carbonate and silica, indicating detrital input.     

Tabulated statistics for some ion dispersion experiments in turbulent air

In July 1977 dispersion experiments with air ions as tracer were carried out at Porton in southern England. Each trial lasted about 40 min. The source height was 5 m. Continuous ion production took place in eight trials for source-sensor distances between 10 and 100m. Ion production in 1 s pulses took place in another four trials for source-sensor distances between 10 and 50 m. Two sensors were positioned at a height of 5 m and one sensor at 4 m. The experimental set-up and the weather conditions are described. Tabulated results comprise concentration frequency distributions, as well as auto- and cross-correlations, both for 0.01 and 0.1 s resolution.     

Petrogenesis of the Kirkpatrick Basalt,Solo Nunatak,northern Victoria Land,Antarctica, based on isotopic compositions of strontium,oxygen and sulfur

Chemical and isotopic compositions of Jurassic tholeiites of the Kirkpatrick Basalt Group from Solo Nunatak, northern Victoria Land, indicate that these rocks are contaminated with crustal material. The basalts are fine grained and contain phenocrysts of augite, pigeonite, hypersthene and plagioclase. The flows on Solo Nunatak are chemically more similar to average tholeiite than flows from Mt. Falla and Storm Peak in the Central Transantarctic Mountains (TAM) which appear to be more highly differentiated. Initial ⁸⁷Sr/⁸⁶Sr ratios of the flows on Solo Nunatak are high (>0.710) and are similar to those reported for the Kirkpatrick Basalt in the Central TAM. Whole-rock δ¹⁸O values are also high, ranging from +6.0 to +9.3‰ and correlate positively with initial ⁸⁷Sr/⁸⁶Sr ratios, similar to the Kirkpatrick Basalt in the Central TAM. The correlation between initial ⁸⁷Sr/⁸⁶Sr ratios and δ¹⁸O values is explained as the result of simultaneous fractional crystallization and assimilation of a crustal contaminant. Sulfur isotope compositions vary between limits of δ³⁴S= -4.01 to +3.41‰ Variations in (δ³⁴S probably resulted from outgassing of SO₂ under varying oxygen fugacities. Laboratory for Isotope Geology and Geochemistry (Isotopia), Contribution No. 71     

Biomechanical conflicts between adaptations for diving and aerial flight in estuarine birds

Diving and aerial flight place conflicting physiological constraints on diving birds depending on their typical dive depths. The amount by which air volumes in the respiratory system and plumage are reduced by hydrostatic pressure decreases rapidly with depth. Thus, birds diving shallowly, and ascending passively by means of positive buoyancy, content with greater work against buoyancy as well as more unstable buoyancy as they move vertically in the water column. The buoyancy of air far exceeds that of tissues or blood, whose buoyancy does not change appreciably with depth. Accordingly, experiments on ducks suggest that birds adapt to shallow diving by increasing blood volume and thus blood oxygen stores while decreasing respiratory volume. During dives, increased inertia from greater mass of blood and associated muscle lowers the costs of foraging at the bottom by resisting the upward buoyant force, but raises the costs of descent because of higher inertial work in accelerating the body with each stroke. Thus, average dive depth (compression of buoyant air spaces), stroke kinematics (inertial effects), and the relative time spent descending versus bottom foraging will determine the appropriate balance between buoyancy and inertia for diving. Greater blood volume also increases wing loading, so elements of dive costs must be balanced against flight costs in optimizing allocation of oxygen stores to blood versus the respiratory system. For example, biomechanical models for ducks suggest that increasing blood volume while decreasing respiratory volume lowers dive costs only for dives to depths <5 m or for dives with extended time at constant depth. If flight costs are also considered, these anti-buoyancy mechanisms reduce daily energy expenditure only if average dive depth is <2 m. High wing-loading in many foot-propelled divers is probably not an adaptation to diving but rather a result of modifications in wing size and shape for high flight-speed. These wing modifications appear possible because competing demands on wing morphology (maneuverability, takeoff ability) are relaxed in open aquatic environments.     

Platinum-group-mineral inclusions in chromite from the bird river sill,Manitoba

Platinum-group minerals (PGM) have been identified as inclusions in chromite from the Bird River Sill, Manitoba. The inclusions are small (<20 microns) and are commonly euhedral. The PGM inclusions are (Ru, Os, Ir) S₂, laurite, and (Os, Ir, Ru alloy), rutheniridosmine: Laurites contain up to 2.99 wt. % palladium. Arsenic content is negligible and no platinum or rhodium has been detected. One platinum-group element alloy contains 0.96 wt. % rhodium but neither platinum nor palladium has been detected. Laurite inclusions in chromite from the ultramafic zone record two compositional trends; first increasing and then decreasing Ru/(Ru+Os+Ir) up section. PGM inclusions and other solid inclusions occur as discrete phases in chromite and are part of the chromite precipitation event. Increasing oxygen fugacity by wall rock assimilation or new magma injection initiates chromite precipitation, locally increasing the sulphur content of the magma to convert PGE alloys to sulphides.     

Isostatic geoid anomalies over trenches and island arcs

Altimeter geoid profiles crossing trenches and island arcs typically exhibit a long-wavelength increase in geoidal height approaching the trench which, in many cases, reaches a maximum over the back-arc area. Bathymetry profiles across trenches show a similar regional increase in the mean depth of the ocean floor behind the trench. Filters corresponding to Airy and Pratt models of isostatic compensation were applied to bathymetry profiles crossing seven different trench systems in order to estimate how much of the observed geoid variation in these regions could be attributed to isostatically-compensated ocean-floor topography. The results indicate that short-wavelength, high-amplitude variations in the geoid, which in some cases account for over 50% of the total observed amplitude variation, can be reasonably reproduced assuming a Pratt model of isostatic compensation. An additional component of the geoid arises from the uncompensated outer rise seaward of the trench. It is therefore concluded that a large part of the geoid signal over trenches and island arcs may be related to variations in sea-floor topography. This topographic component should be removed from altimeter geoid profiles before using the data to infer details of the deeper structure of subduction zones.