Sampling the vertical particle flux in the upper water column using a large diameter free-drifting NetTrap adapted to an Indented Rotating Sphere sediment trap

Further development of the large, surface-tethered sediment trap (NetTrap) employed as part of the MedFlux program is described whereby the large collection capacity of the NetTrap is combined with an Indented Rotating Sphere/Sample Carousel (IRSC) sediment trap (IRSC–NT). This trap is capable of collecting particle flux either in a time series or settling velocity mode; settling velocity mode allows the collection of particles that fall within discrete settling velocity intervals. During short field deployments in the Mediterranean Sea the IRSC–NT configured in the settling velocity mode successfully collected unpoisoned samples for chemical and microbiological experiments. In addition to the development of the IRSC–NT, particle-settling behavior above and below the swimmer-excluding IRS valve was tested during on-deck experiments using a specially constructed water-tight trap. Chemical analyses of settling materials (published elsewhere) suggested that separation of particles by settling velocity was achieved. However, due to the motion of the ship, it was not possible to directly measure particle-settling velocities within the trap. Particle release from the IRS did not bias the apparent settling velocity spectrum. Rotation of the IRS did not engender turbulence at the surface of the sphere or within the skewed funnel below. Tests of different ball designs over the course of the MedFlux program showed that a “ridge and saddle” pattern was optimal for efficiently transferring particles under the IRS seal while still reducing swimmer entrance to the collection funnel. The large size of the IRSC–NT did not prevent it from drifting effectively with the current. Several modifications of the present design are proposed that should improve the accuracy of the settling velocity measurements.     

The abyssal bounty fan and lower Bounty Channel: evolution of a rifted-margin sedimentary system

The Bounty Channel and Fan system provides the basis for a model for deep-sea channel and fan development in a rifted continental margin setting. The sedimentary system results from an interplay between tectonics (fan location; sediment source), turbidity currents (sediment supply), geostrophic currents (sediment reworking and distribution) and climate (sea level, and hence sediment supply and type). Today, sediment is shed from the collisional Southern Alps, part of the Pacific/Indo-Australian plate margin, and passes east across the adjacent shelf and into the Otago Fan complex at the head of the Bounty Trough. Paths of sediment supply, and locations of sediment deposition, are controlled by the bathymetry of the Bounty Trough, with axial slopes as high as 37 m/km (2°) towards the trough head, diminishing to around 3.5 m/km (0.2°) along the trough axis. The Bounty Fan is located 800 km further east, where the Bounty Channel debouches onto abyssal oceanic crust at the mouth of the Bounty Trough. The Bounty Fan comprises a basement controlled fan-channel complex with high leveed banks exhibiting fields of mud waves, and a northward-elongated middle fan. Channel-axis gradients diminish from 6 m/km (0.35°) or more on the upper fan to less than 1 m/km (<0.06°) on the lower fan. Parts of the left bank levee and almost the entire middle fan are being eroded and re-entrained within a Deep Western Boundary Current (DWBC), which passes along the eastern New Zealand margin at depths below 2000 m. The DWBC is the prime source of deep, cold water flow into the Pacific Ocean, with a volume of ca. 20 Sv and velocities up to 4 cm/s or greater. The mouth of the Bounty Channel, at a depth of 4950 m at the south end of the middle fan, acts as a point source for an abyssal sediment drift entrained northward under the DWBC at depths below 4300 m. The Bounty Fan probably originated in the early to middle Neogene, but has mostly been built during the last 3 Myr (Plio-Pleistocene), predominantly as climate-controlled sedimentary couplets of terrigenous, micaceous mud (acoustically reflective; glacial) and biopelagic ooze (acoustically transparent; interglacial), deposited under the pervasive influence of the DWBC.     

Evaluation of drift current parameters using an analytical model

The paper is concerned with the evaluation of the drift current parameters derived through the use of an analytical model. In this model, effective when stratification is stable and indifferent, the vertical turbulence coefficient profile is prescribed by the power function, and hydrodynamic quantities are prescribed using the external parameters of the problem (wind stress, the Coriolis parameter, and the dimensionless stratification parameter). Model data are compared with the observations of the upper mixed layer in the vicinity of the oceanic Station C, conducted during one year. It is shown that, under the spring-summer-time warming conditions, the model at issue is capable of adequately simulating the upper ocean layer dynamics. Translated by Vladimir A. Puchkin.     

In situ velocity profiles in gassy sediments: Kiel Bay

Acoustic behavior of gas-bearing sediments is significantly different from that of gas-free sediments. In situ velocity profiles and acoustic signal characteristics in gas-bearing sediments of the upper several meters of the sea floor in Kiel Bay are presented in this study. Observed velocities in gas-bearing sediments are both higher and lower than those of the gas-free sediments. Small amounts of gas appear to cause signal reverberation without much attenuation. whereas large amounts of gas cause substantial attenuation.     

Combining process and output indicators to evaluate participation and sustainability in integrated coastal zone management projects

Integrated coastal zone management has evolved in practice and in the literature to implicate and advocate for public participation. Public participation has been proposed to open debate, contribute to policy formulation, increase government accountability, build support for agency programs, reduce community tensions and increase the sustainability of the actions. This study analysed the success of three integrated coastal zone management projects based on 8 process and output indicators. Public participation does not seem to have had an impact on the overall project objective nor on the sustainability indicators. These results bring us back to the initial concept of ICZM based on horizontal and vertical integration, and suggest that projects promoting ICZM need to be adapted to each specific cultural and political context. Long-term sustainability and natural resource management will only be achieved when the projects and activities are adapted to meet the reality on the field.     

Sediment bioavailable organic matter,deposition rates and mixing intensity in the Setúbal–Lisbon canyon and adjacent slope (Western Iberian Margin)

The role of the Setúbal–Lisbon canyon in accumulation and transport of labile organic matter from the coastal sea and ocean surface water towards the deep sea was assessed by investigating the distribution of organic matter of different quality in sedimentary aggregates and surface sediments of the canyon and adjacent slopes. Total hydrolysable amino acids (THAA) and organic carbon (Corg) were measured from aggregates, and contents of Corg, chlorophyll a (chl a), phaeopigments (phaeo), chloroplastic pigment equivalents (CPE) from sediments. As indices of organic matter (OM) quality THAA:Corg, degradation index (DI), chl a:phaeo, chl a:Corg and C:N ratio were determined. Sediment profiles of chl a and the isotope 210 of lead (²¹⁰Pb) were used as tracers in a transport model to estimate deposition rates and background levels of the tracers, and sediment mixing rates (Db). Whereas bulk Corg contents of canyon and slope sediments were practically similar at all depths, higher contents of THAA, chl a and CPE, as well as higher THAA:Corg, DI and chl a:Corg, in aggregates and sediments from the upper reaches of the canyon indicate that labile organic matter accumulates in the upper canyon. This is confirmed by higher chl a and ²¹⁰Pb deposition and Db calculated from the model. Hence, the Setúbal–Lisbon canyon, specially the upper region, acts as a natural trap of organic matter that is transported to the region via lateral transport and vertical settling from primary productivity. Organic matter might be further transported in downward canyon direction via rebound processes. The chl a and ²¹⁰Pb profiles reveal active sediment mixing by physical processes and/or animal reworking.     

Terminal velocities of pure and hydrate coated CO2 droplets and CH4 bubbles rising in a simulated oceanic environment

Understanding the upward motion of CO₂ droplets or CH₄ bubbles in oceanic waters is prerequisite to predict the vertical distribution of the two most important greenhouse gases in the water column after these have been released from the seabed. One of the key parameters governing the fate of droplets or bubbles dissolving into the surrounding seawater as they rise, is the terminal velocity, u_T. The latter is strongly influenced by the ability of both compounds to form skins of gas hydrate, if pressure and temperature satisfy thermodynamic framework conditions. Experimental efforts aiming to elucidate the rise properties of CO₂ droplets and CH₄ bubbles and specifically the influence of hydrate skins open the possibility to obtain a parameterization of u_T applicable to both hydrate-coated and pure fluid particles of CH₄ and CO₂. With the present study, we report on experimentally determined terminal velocities of single CH₄ bubbles released to pressurized and temperature-regulated seawater. Hydrate skins were identified by high bubble sphericities and changed motion characteristics. Based on these experiments as well as published data on the rise of hydrate-coated and pure liquid CO₂ droplets and physical principles previously successfully used for clean bubbles near atmospheric pressures, a new parameterization of u_T is proposed. Model predictions show a good agreement with the data base established from the laboratory-based measurements.     

Open-system chemical behavior in deep Wilcox Group mudstones,Texas Gulf Coast,USA

Wilcox Group mudstones have been mechanically and geochemically transformed over a temperature range of 20–200 °C. Our research controlled for provenance and age by sampling from five wells, parallel to the paleodepositional axis, all within the Houston delta system. Across the sampled depths, mudstone porosity has been reduced from ∼25 to <10% and bulk mineralogical change as documented by quantitative X-ray diffraction includes decreases in quartz, K-feldspar and kaolinite content whereas illite + illite − smectite, chlorite, and plagioclase increase. These mineral transformations transfer elements at a scale of less than 1 mm from one mineralogical form to another, however, X-ray fluorescence data suggest that among major elements only Al₂O₃ and TiO₂ are fully conserved within the system (trace-element ZrO₂ is also conserved). K₂O has been added to and SiO₂ released from the Wilcox Group mudstones. Cathodoluminescence and secondary electron imaging did not find this SiO₂ locally precipitated. We, therefore, document an open-system geochemical behavior.     

Physical determinants of intertidal communities on dissipative beaches: Implications of sea-level rise

Sea-level rise is likely to cause significant changes in the morphodynamic state of beaches in the higher latitudes, resulting in steeper beaches with larger particle sizes. These physical changes have implications for beach invertebrate communities, which are determined largely by sediment particle size, and hence for ecosystem function. Previous studies have explored the relationships between invertebrate communities and environmental variables such as particle size, beach slope and exposure to wave action, and often these physical variables can be integrated in various indices of morphodynamic state. Most of these studies incorporated a full range of beach types that included wave-dominated surf beaches, where the wave action is harsh enough to enable reliable estimates of breaker height, a parameter included in several of the indices, and concluded that more dissipative beaches with gentler slopes and finer particle sizes often support a higher number of species and greater abundance than more reflective beaches. Whether these predictions remain valid for less wave-dominated beaches, where breaker height is more difficult to determine, is uncertain. In the present study, the abundance of meio- and macrofauna was quantified across a range of beaches in the UK, which are generally towards the lower energy end of the morphodynamic gradient, and their relationships with beach physical properties explored. No significant relationships were found between abundance and the standard morphodynamic indices, but significant relationships were found for both macro- and meiofaunal abundance when these indices were combined with an exposure index (derived from velocity, direction, duration and the effective fetch). All the relationships identified between abundance and combined morphodynamic indices indicated a higher abundance of both macro- and meiofauna on the more dissipative beaches. The reverse was however found for species richness. If predictions that accelerated sea-level rise will move beaches towards a more reflective morphodynamic state are correct, this could lead to declines in the abundance of meio- and macrofauna, with potential adverse consequences for ecosystem functioning.     

Miocene facies associations and sedimentary evolution of the Southern Transylvanian Basin (Romania): Implications for hydrocarbon exploration

The Transylvanian Basin is a mature hydrocarbon province of Romania characterized by two petroleum systems: Mesozoic (thermogenic) and Miocene (biogenic). An extensive outcrop-based sedimentological and micropaleontological study correlated to seismic and well data discusses the elements of the Miocene petroleum system. The facies associations are indicative of alluvial, fandelta, shallow- and deep-marine settings. These are grouped into four different depositional systems (evaporite, mud-carbonate, sand-mud and sand-gravel). Their evolution in time and space shows large differences between various parts of the basin that have important consequences for exploration.