Early-indicator signals of groundwater contamination: the case of seawater encroachment

 An early indication of groundwater contamination occurs when pollutant concentrations start to fluctuate and exceed background values of ambient fresh groundwater. An analysis of a characteristic situation of this type uses data from Israel's coastal phreatic granular aquifer. The pollutant is generally seawater, and the contamination process involves replacement of freshwater by encroaching sea- or other saltwater, a process augmented by human activity. The contamination process involves three stages: (1) groundwater composition remains relatively stable with small salinity content; (2) small salinity changes are perceptible with reversible fluctuations; and (3) salinity concentration increases at a sharply higher rate. The second stage is a useful early-indicator signal of contamination. Early-indicator signals of groundwater pollutant concentrations involve "minor" fluctuations in water chemistry at the advent of the contamination process. The intensity and magnitude of such a salinization/pollution process at any given location depends upon lithologic matrix, aquifer heterogeneity, and resultant flow domain characteristics, as well as contaminant properties. If such "signs" are detected at a sufficiently early stage, appropriate management steps may be taken to rectify further seawater and/or saltwater encroachment. Received: 23 July 1996 · Accepted: 25 June 1997     

Damage model for jointed rock mass and its application to tunnelling

This paper establishes an anisotropic nonlinear damage model in strain space to describe the behavior of jointed rock and applies it to mechanical analysis of tunnelling. This work focuses on rate-independent and small-deformation behavior during static isothermal processes. The prime results include: (1) the properties of damage-dependent elasticity tensors based on geological information of the jointed rock mass; (2) the damage evolution law presented on the basis of thermodynamics and combined with endochronic theory; and (3) the global damage tensor based on the work-equivalence principle and the local geological data of multi-joint sets. Finally the numerical results of a tunnel intersection in jointed rock is presented to illustrate the mechanical behavior of this model.     

Isometamorphic variations in the reflectance and fluorescence of vitrinite—a key to depositional environment

Petrographic investigations of serial ply samples from five high- to medium-volatile bituminous coal seams from Australia (4) and Canada (1) reveal substantial in-seam variations in the reflectance and monochromatic microfluorescence intensities of the maceral subgroup telovitrinite. The variations consist of one case of reflectance enhancement and fluorescence suppression, and four cases of reflectance suppression and fluorescence enhancement. The single case of reflectance enhancement and fluorescence suppression is due to the oxidation of the vitrinite nuclei at the sequence boundary between the Bayswater and Upper Wynn seams in New South Wales. The four cases of reflectance suppression and fluorescence enhancement result from the syn- and epigenetic absorption by the vitrinite nuclei of hydrogen donated by, presumably, anaerobic bacteria-generated lipids. Two of the coals are marine-influenced: the Liskeard Seam from the Bowen Basin by combined syngenetic and epigenetic effects, and the Greta Seam from the Sydney Basin mainly by epigenetic contact with sea water. For both coals, the results are strong vitrinite reflectance suppression and fluorescence enhancement. The remaining two coals, the Bulli Seam from the Sydney Basin and a coal seam from the Gates Formation in British Columbia, show moderate epigenetic effects on the optical properties of telovitrinite by fresh-water. In the Bulli Seam which was studied in two adjacent localities, the reflectance suppression and fluorescence enhancement of telovitrinite are stronger under sandstone roof than under shale roof. In some cases, the epigenetic effects are superimposed on syngenetic telovitrinite reflectance and fluorescence variations resulting from the cogeneration and mixing of different telovitrinite precursors, for example, autochthonous roots and hypautochthonous or allochthonous shoots. A measure of the degree of dispersal and mixing is the coefficient of variation of telovitrinite reflectance and/or fluorescence. This coefficient correlates well with detrital minerals and dispersed macerals, e.g., inertodetrinite and, to a lesser extent, sporinite. Some comments are made on slitted so-called pseudovitrinite which is regarded as a telovitrinite that was subjected to very weak post-coalification desiccation and possibly oxidation without losing much of its thermoplastic properties.     

Geological factors influencing the concentration of trace elements in the Philippi peatland, eastern Macedonia, Greece

Six peat samples obtained from the Holocene and the Weichselian of the Philippi peat deposit, eastern Macedonia, Greece, were analyzed for 48 trace elements by Inductively Coupled Plasma–Mass Spectrometry (ICP–MS). The ash contents of these samples were also determined. Most of the trace elements are associated with the minerals in the peat, while Ge, Mo, Pb, Se, Ta, Tl, U, and W display a greater affinity with the organic matter. Compared with crustal averages (Clarke concentrations), the Philippi peat is enriched in some elements (Ag, As, Au, Cd, Mo, Se, Te, U, and W) because of the respective mineralizations in the area. The Philippi peat is also enriched in Cr, Cu, Mo, Pb, Sc, Sn, T, V, Y, and Zn in comparison with typical fen peats, as well as in As, Cr, Mo, Se, and U in comparison with typical coals. Climatic and hydrogeological conditions strongly influenced the peat-forming environment resulting in a differentiation between Holocene and Weichselian peat. Generally, the Holocene peat contains lower concentrations of trace elements in the northern and southern part of the fen, than the Weichselian one. The opposite trend is observed in the fen area close to the western basin margins.     

Reduction of inorganic compounds in autoclaves by using suspended cellulose

Autoclaves are closed vessels in which liquids can be heated above their ‘normal' boiling points. As a consequence the pressure will rise. This equipment has permitted a variety of processes like the syntheses of organics and the leaching of metal ores. Pressure technologies can be used for accelerating reactions, for specific syntheses or they offer an environmental or economical alternative for existing processes. Wet pressure oxidation of sewage sludge, an organic waste product, has become a proven technology. If less oxygen is added than stoichiometrically required for a complete oxidation, cellulose will break down by a different reaction mechanism, releasing electrons. Under these circumstances reduction of inorganic compounds is possible.     

Numerical simulation of NAPL flow in the subsurface

A three-dimensional, three-phase numerical model is presented for simulating the movement of immiscible fluids, including nonaqueous-phase liquids (NAPLs), through porous media. The model is designed to simulate soil flume experiments and for practical application to a wide variety of contamination scenarios involving light or dense NAPLs in heterogeneous subsurface systems. The model is derived for the three-phase flow of water, NAPL, and air in porous media. The basic governing equations are based upon the mass conservation of the constitutents within the phases. The descretization chosen to transform the governing equations into the approximating equations, although logically regular, is very general. The approximating equations are a set of simultaneous coupled nonlinear equations which are solved by the Newton-Raphson method. The linear system solutions needed for the Newton-Raphson method are obtained using a matrix of preconditioner/accelerator iterative methods. Because of the special way the governing equations are implemented, the model is capable of simulating many of the phenomena considered necessary for the sucessful simulation of field problems including entry pressure phenomena, entrapment, and preferential flow paths. The model is verified by comparing it with several exact analytic test solutions and three soil flume experiments involving the introduction and movement of light nonaqueous-phase liquid (LNAPL) or dense nonaqueous-phase liquid (DNAPL) in heterogeneous sand containing a watertable. This revised version was published online in August 2006 with corrections to the Cover Date.     

Geology of the Bozdag area, central Menderes massif, SW Turkey: Pan-African basement and Alpine deformation

The Menderes massif consists of a Precambrian Core Series that preserves evidence for a polymetamorphic history and a Paleozoic/Mesozoic Cover Series that experienced only the Alpine tectonometamorphic evolution. Structural, petrographic, and geochronologic investigations in the central Menderes massif demonstrate that (a) part of the metamorphic and structural evolution of the Precambrian basement is older than the undeformed 551±1.4-Ma-old Birgi metagranite, and (b) inferred Alpine fabrics overprinting the Cover Series largely have the same attitudes as the old structures in the much older Core Series. The inferred Alpine fabrics include both contractional and extensional structures. Contraction under greenschist to amphibolite facies conditions resulted in the imbrication of the Core and Cover Series and generated an inverted metamorphic sequence by north-directed thrusting. During Alpine extension, most of the south-dipping thrust faults were reactivated as extensional shear zones under decreasing greenschist facies conditions.     

Dynamic simulation of littoral zone habitats in low Chesapeake Bay. II. Seagrass habitat primary production and water quality relationships

Seagrasses are indicators of ecosystem state because they are sensitive to variations in water composition and clarity resulting from watershed-level impacts. A simulation model designed to studyZostera marina (eelgrass) habitat dynamics in a variable littoral zone environment was used to address the potential ecological responses to eutrophication in lower Chesapeake Bay. The adjacent channel boundary environment is a source of dissolved and particulate materials to the littoral zone. In the simulations, concentrations of key water quality variables in the adjacent estuarine channel boundary were either halved or doubled relative to the base case to investigate light versus nitrogen effects. The role of the seagrass meadow in littoral zone carbon and nitrogen dynamics was evaluated when meadow size was changed in the model. Particulate and dissolved organic carbon accounted for 83% of the submarine light attenuation in the seagrass meadow. In all model runs, the water column concentrations of chlorophylla and dissolved inorganic nitrogen (DIN) were below the habitat criteria proposed as critical to seagrass survival. Eelgrass community production was carefully regulated by the interactive effects of light, nitrogen, and grazing on epiphyte growth. Increased eelgrass coverage in the littoral zone led to a simulated doubling of ecosystem primary production but reduced the fraction of production by planktonic and sediment microalgae. The simulation model presented here demonstrated the importance of material input from the channel in littoral zone biogeochemical dynamics. Submarine ligh regulated primary production more strongly than inorganic nitrogen concentrations in the model. External DIN concentrations influenced seagrass survival indirectly: enrichment stimulated growth of epiphytes and phytoplankton and promoted shading of the seagras leaf. The model was based upon a unimpacted ecosystem and deteriorated water quality negatively influenced primary production greater than the increases triggered by improved condition. Increased material loading to the littoral zone reduced submarine light availability, increased phytoplankton production, lowered ecosystem production, and reduced subtidal vegetated habitat. This simulation model of the estuarine littoral zone model combines hydrodynamics, biogeochemical sources and sinks, and living resources in order to better understand structure, function, and change in aquatic ecosystems.     

TRANSIT,an experimental archaeological program in periglacial environment: Problem,methodology, first results

The aim of the experimental archaeological program TRANSIT is to improve the scientific study of Paleolithic sites. This program is based on studies and experiments carried out at high altitudes in the French Alps. One of its goals is to assess the effects of periglacial processes on spatial distributions within archaeological assemblages and on artifacts and bones. Research on sedimentary environments elucidates stratogenesis in periglacial contexts. In particular, sedimentary models that are useful for interpreting fossil deposits were identified. The first results obtained from experimental artifact test plots emphasize the importance and speed of changes that occur in such a climatic and morphodynamic context. Mean lateral displacements from 1.66 to 4.75 cm yr⁻¹ were measured. Moreover, analysis of osseous and dental pieces showed that they experienced important damage. Works on pollen assemblages have shown that most of the pollen deposited on the ground surface is quickly removed and that, owing to the very uneven preservation of pollen taxa, an important distortion of the initial spectrum occurs. A model of spatial arrangement of artifacts linked to the action of solifluction processes is also proposed. Finally, application of these results to some Paleolithic sites in the Massif Central and southwest France are discussed. © 1998 John Wiley & Sons, Inc.     

The practicalities of using CFCs and SF6 for groundwater dating and tracing

Knowledge of groundwater residence time is important in understanding key issues in the evolution of water quality, whether this occurs due to water–rock interaction or simply by mixing or contamination. The build-up in the atmosphere of the trace gases chlorofluorocarbons (CFCs) and sulphur hexafluoride (SF₆) from the middle of the last century offers a convenient way of dating waters up to ∼60 a old. The gases are well-mixed in the atmosphere so their input functions are not area-specific as is the case with ³H. While any one of these trace gases can in principle provide a groundwater age, when two or more are measured on water samples the potential exists to distinguish between different modes of flow including piston flow, exponential flow and simple end-member mixing. As with all groundwater dating methods, caveats apply. Factors such as recharge temperature and elevation must be reasonably well-constrained. Primarily for SF₆, the phenomenon of ‘excess air’ also requires consideration. Primarily for the CFCs, local sources of contamination need to be considered, as do redox conditions. For both SF₆ and the CFCs, the nature and thickness of the unsaturated zone need to be factored into residence time calculations. However, as an inexpensive dating method, the trace gases can be applied to a wide range of groundwater problems where traditional age indicators might once have been used more sparingly. Examples include tracing flowlines, detecting small modern inputs in ‘old’ waters, and pollution risk assessment. In the future, with the main CFCs already declining in the atmosphere, new anthropogenic trace gases are likely to take their place.