The solubility of quartz in aqueous sodium chloride solution at 350°C and 180 to 500 bars

The solubility of quartz in 2, 3, and 4 molal NaCl was measured at 350°C and pressures ranging from 180 to 500 bars. The molal solubility in each of the salt solutions is greater than that in pure water throughout the measured pressure range, with the ratio of solubility in NaCl solution to solubility in pure water decreasing as pressure is increased. The measured solubilities are significantly higher than solubilities calculated using a simple model in which the water activity in NaCl solutions decreases either in proportion to decreasing vapor pressure of the solution as salinity is increased or in proportion to decreasing mole fraction of water in the solvent.     

Guided wave propagation in laterally varying media - II. Lg-waves in north-western Europe

Summary. Lg -wave observations at NORSAR from a sequence of explosions straddling the Central Graben in the North Sea, show that the phase is almost extinguished by passing through this structure. For models of the graben structure, based on seismic refraction experiments, with crustal thinning beneath a zone of thickened sediments, numerical modelling of Lg propagation shows very poor transmission. The inclusion of attenuation simulating the effects of scattering from faults and other complex structures further diminishes the transmittivity. The theoretical effect of a crustal pinch is to redistribute S energy over a wide range of groups velocities, a pattern that fits well with the observations.
Three components recordings at NORSAR of explosive charges fired in water covering a wide range of azimuths, show significant transverse components to the seismograms. The transverse energy builds up with travel time and for Lg is of the same order as the vertical component. These results are consistent with the theoretical prediction of progressive net transfer of energy from Rayleigh to Love modes as the wavetrain propagates through a three-dimensionally heterogeneous medium.     

VELOCITY DISPERSION OF SEISMIC WAVES*

In well velocity surveys made to calibrate Sonic (CV) Logs the calibration survey uses frequencies around 50 Hz whereas the Sonic Logging tool uses frequencies around 20 kHz. There thus exists the possibility of making a direct measure of velocity dispersion. In any one survey the disturbing factors, both instrumental and operational, will often mask any dispersive effect that might exist. Consequently this paper reports on a statistical analysis of the velocity differences resulting from calibration surveys and Sonic logs. Only Borehole Compensated Sonic Logs were used. Four areas were investigated: the North Sea, Abu Dhabi, Libya and Alaska. After rejecting logs and calibration records which were obviously in error there remained 424000 feet (about 130 km) of usable log distributed throughout 66 wells. The four areas were analysed separately and in no case was the estimated dispersion significantly different from zero. However, the mean values did correlate with lithology from (? 0.17 ± 0.18)% for the essentially carbonate section in Abu Dhabi to (+ 0.45 ± 0.25)% for the sand-shale section in Alaska, a positive sign meaning that the higher frequencies travelled faster. Except for Alaska the calibration surveys were made with a wall-clamp geophone, and for these areas amplitude measurements were made. After suitable corrections estimates of the absorption parameter Q were obtained. These varied from 20 to 200 with mean values of 63 for Libya, 70 for Abu Dhabi and 88 for the North Sea (excluding the Tertiary). If, as is usually assumed, the absorption mechanism is linear and is described by a Q which is independent of frequency, then these values would necessarily imply dispersion of several percent. As instanced above no such dispersion was observed. It is possible that the expected dispersion was compensated for by invasion of the mud filtrate into the borehole walls, but it is more likely that the absorption mechanism was substantially non-linear.     

Volcanogenic massive sulfide deposits of ophiolite associations

Volcanogenic massive sulfide deposits in ophiolite complexes are usually attributed to the Cyprus type. They associate with basaltic volcanics that are formed in mid-ocean or back-arc spreading centers and much less frequently in intra-plate settings. The deposits are characterized by copper or copper-zinc ores that are enriched in Ni, Co, and in places Mn and As, but are very poor in Pb and demonstrate a low to moderate content of Ag and Au. Typically, the deposits are low to very low in ore and metal reserves. Cyprus-type deposits were irregularly distributed during geological history. The most ancient of them were formed in the Neoproterozoic, while the bulk of the deposits are Ordovician or Cretaceous in age. Their possible Paleoproterozoic analogues can be found in the Svecofennian belt (Outokumpu ore district), while modern ones are confined to the Explorer and Endeavour Ridges and southern segment of the Juan de Fuca Ridge.     

季节冻土对土钉支护的影响

川藏交通廊道规划路线沿线滑坡锚固工程在全生命周期内将不可避免受到季节性冻土冻胀融缩的不利影响。为减缓此不利影响,本文提出基于多个挤压摩擦型屈服套的屈服装置、消能蓄能型碟簧系统,形成可双向调节预应力的锚索新结构。并对该锚索进行室内张拉试验、极限承载力试验及工作机理研究,成功研制吨位500 kN级、行程100 mm的双向调节预应力锚索。室内试验证实,单个挤压摩擦型屈服套起始屈服力为120~135 kN,平稳行程可达255 mm;屈服装置由4个挤压摩擦型屈服套及P锚组成,起始屈服力为420~450 kN,行程可达到100 mm以上;碟簧系统可实现耗能(冻胀时可抵消约60%的预应力增长)与蓄能(融缩时可抵消约40%的预应力损失)的目的。屈服行程完结后,双向调节预应力锚索极限承载力为1050kN,与传统锚索极限承载力相当。该新型锚索起始屈服力及行程具有较好的可拓展性,性能参数优于市场同类产品,可用于冻融环境及地震、大变形情形下的滑坡边坡加固,为川藏交通廊道沿线季节性冻土区滑坡、边坡防护提供了一种新的解决方案。     

Sources of dissolved REE in mountainous streams draining granitic rocks, Sierras Pampeanas (Córdoba, Argentina)

Stream waters draining granitic terrains from the highest part (850 to 2200 m a.s.l.) of Sierras Pampeanas (Córdoba, Argentina, ∼32°S, ∼65°W) were sampled in order to define sources and distribution of dissolved rare earth elements (REE), and to describe the geochemical processes that govern their mobility. The contribution of the regional granite to the dissolved REE pool in stream water is limited due to the physical conditions predominating in the area (i.e., steep slopes and semiarid climate). Therefore, precipitation is considered a seasonally significant source controlling REE concentration in stream water. Dissolved REE concentrations are inversely correlated with monthly precipitation and rainfall frequency. During the rainy season (i.e., the austral summer) REE concentrations in stream water are lower than during the dry season (i.e., austral winter). Such low concentrations reflect the balance between the REE input from precipitation and their removal by adsorption. In contrast, during the dry season, the longer residence time of water within fractures and colluvium determines an increased REE concentration in the base flow. Lower pH values also contribute to raise REE concentration through desorption from mineral surfaces.     

P- and S-wave anisotropy of a synthetic sandstone with controlled crack geometryl1

A method is reported for the production of synthetic porous sandstones containing cracks of known dimensions and geometry with respect to the matrix. A synthetic sandstone was manufactured from Sand cemented with an epoxy glue. The cracks of known geometry were introduced into the material in the manufacturing stage, by emplacing thin metallic discs in the Sand-epoxy matrix. These discs were chemically leached out of the consolidated porous sandstone. Acoustic anisotropy. and shear-wave splitting were observed in the synthetic sandstones. For the dry sample the observed angular dependence of the P- and S- wave velocities (at 100 kHz) compares well, qualitatively, with the theoretical models of Hudson and of Thomsen. Quantitatively, however, the experimental data fits Hudson's model better. For the case of a saturated sample the experimental results are in excellent agreement with Thomsen's model. Hudson's model, on the other hand, predicts a different angular dependence for P-waves. This demonstrates that the concept of fluid transfer between cracks and the ambient porosity can be a significant process. The results reported here are from the first successful experiment in which the theoretical models were tested on a porous material containing a known crack geometry.     

Distinct metamorphic evolution of alternating silica-saturated and silica-deficient microdomains within garnet in ultrahigh-temperature granulites: An example from Sri Lanka

Here we report the occurrence of garnet porphyroblasts that have overgrown alternating silica-saturated and silica deficient microdomains via different mineral reactions. The samples were collected from ultrahigh-temperature (UHT) metapelites in the Highland Complex, Sri Lanka. In some of the metapelites, garnet crystals have cores formed via a dehydration reaction, which had taken place at silica-saturated microdomains and mantle to rim areas formed via a dehydration reaction at silica-deficient microdomains. In contrast, some other garnets in the same rock cores had formed via a dehydration reaction which occurred at silica-deficient microdomains while mantle to rim areas formed via a dehydration reaction at silica-saturated microdomains. Based on the textural observations, we conclude that the studied garnets have grown across different effective bulk compositional microdomains during the prograde evolution. These microdomains could represent heterogeneous compositional layers (paleobedding/laminations) in the precursor sediments or differentiated crenulation cleavages that existed during prograde metamorphism. UHT metamorphism associated with strong ductile deformation, metamorphic differentiation and crystallization of locally produced melt may have obliterated the evidence for such microdomains in the matrix. The lack of significant compositional zoning in garnet probably due to self-diffusion during UHT metamorphism had left mineral inclusions as the sole evidence for earlier microdomains with contrasting chemistry.     

Reproductive biology of Spondias tuberosa Arruda (Anacardiaceae), an endemic fructiferous species of the caatinga (dry forest), under different management conditions in northeastern Brazil

In areas under different management conditions (management units, MUs) located either on a slope or at the base of a slope and either in a plantation or in a pasture, we compared the flower and fruit production, floral visitors, visitation rates and pre-emergent reproductive success (PERS) of Spondias tuberosa (Anacardiaceae) in an area of dry forest in NE Brazil. Individuals in the plantation MU produced more flowers per inflorescence than those in other MUs, but there were no statistical differences in mean fruit set among MUs. The only difference in mean visitation rates was between the plantation (65.83 ± 38.49) and the slope sites (11.5 ± 12.8). We observed visits by 19 insect species, including bees (31.6%), butterflies (31.6%), wasps (26.3%) and flies (10.5%). A clustering analysis based on the number of visits showed that a) the plantation site is most different from the other MUs, b) the pasture and the site at the base of the slope are similar to the slope site, and c) the higher frequency of visits of pollinators in the plantation MU was responsible for these differences. Of the 19 species of insects visiting the flowers, 12 were considered pollinators. The pollinator similarity analysis indicated a clear separation between areas and suggested that human activity has resulted in the replacement of native pollinators by exotic species. However, these changes apparently have not affected the pre-emergent reproductive success of S. tuberosa. Our results show that plant reproductive biology in semi-arid ecosystems may be modified by human action and that changes in floral production and pollinator guilds are the most conspicuous effects. However, the traditional management performed by local people may not affect the reproductive success of plant species.