Ekman motion in shallow open sea in the presence of time-harmonic variation of water depth

The time variation of the wind-induced flow in a homogeneous unbounded sea region has been analytically investigated. The time-dependent Ekman solution in a homogeneous, shallow open sea has been further extended by taking into account the time variation in water depth which might be caused by either tidal motion or change in the mixed layer thickness. The solution approach taken in this study is based on the Galerkin-eigenfunction method originally developed by Heaps [1972. On the numerical solution of three-dimensional hydrodynamical equations for tides and storm surges. Memoires de la Societe Royale des Sciences de Liege Serie 6(2), 143–180]. A series of calculations have been made with emphasis on the influence of the time variation in water depth upon the build-up of Ekman spirals in the presence of oscillatory variations in water depth. It has been found that two oscillations contribute to the wind drift current, the inertial oscillation and the depth-variation-induced oscillation; the inertial oscillation decays with time, but the depth-variation-induced oscillation remains undamped despite the presence of bottom friction. The presence of time-harmonic variation produces peculiar forms of hodograph with a curled or circular pattern according to the angular frequency of the water depth variation.     

210Pb and226Ra distributions in the Circumpolar waters

²¹⁰Pb and²²⁶Ra profiles have been measured at five GEOSECS stations in the Circumpolar region. These profiles show that²²⁶Ra is quite uniformly distributed throughout the Circumpolar region, with slightly lower activities in surface waters, while²¹⁰Pb varies with depth as well as location or area. There is a subsurface²¹⁰Pb maximum which matches the oxygen minimum in depth and roughly correlates with the temperature and salinity maxima. This²¹⁰Pb maximum has its highest concentrations in the Atlantic sector and appears to originate near the South Sandwich Islands northeast of the Weddell Sea. Concentrations in this maximum decrease toward the Indian Ocean sector and then become fairly constant along the easterly Circumpolar Current.Relative to²²⁶Ra, the activity of²¹⁰Pb is deficient in the entire water column of the Circumpolar waters. The deficiency increases from the depth of the²¹⁰Pb maximum toward the bottom, and the²¹⁰Pb/²²⁶Ra activity ratio is lowest in the Antarctic Bottom Water, indicating a rapid removal of Pb by particulate scavenging in the bottom layer and/or a short mean residence time of the Antarctic Bottom Water in the Circumpolar region.²²⁶Ra is essentially linearly correlated with silica and barium in the Circumpolar waters. However, close examination of the vertical profiles reveals that Ba and Si are more variable than²²⁶Ra in this region.     

In Situ Monitoring of Vapor Phase TCE Using a Chemiresistor Microchemical Sensor

A chemiresistor microchemical sensor has been developed to detect and monitor volatile organic compounds in unsaturated and saturated subsurface environments. A controlled study was conducted at the HAZMAT Spill Center at the Nevada Test Site, where the sensor was tested under a range of temperature, moisture, and trichloroethylene (TCE) concentrations. The sensor responded rapidly when exposed to TCE placed in sand, and it also responded to decreases in TCE vapor concentration when clean air was vented through the system. Variations in temperature and water vapor concentration impacted baseline chemiresistor signals, but at high TCE concentrations the sensor response was dominated by the TCE exposure. Test results showed that the detection limit of the chemiresistor to TCE vapor in the presence of fluctuating environmental variables (i.e., temperature and water vapor concentration) was on the order of 1000 parts per million by volume, which is about an order of magnitude higher than values obtained in controlled laboratory environments. Automated temperature control and preconcentration is recommended to improve the stability and sensitivity of the chemiresistor sensor.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

Field survey of the 1994 Mindoro Island,Philippines tsunami

This is a report of the field survey of the November 15, 1994 Mindoro Island, Philippines, tsunami generated by an earthquake (M=7.0) with a strike-slip motion. We will report runup heights from 54 locations on Luzon, Mindoro and other smaller islands in the Cape Verde passage between Mindoro and Luzon. Most of the damage was concentrated along the northern coast of Mindoro. Runup height distribution ranged 3–4 m at the most severely damaged areas and 2–4 in neighboring areas. The tsunami-affected area was limited to within 10 km of the epicenter. The largest recorded runup value of 7.3 m was measured on the southwestern coast of Baco Island while a runup of 6.1 m was detected on its northern coastline. The earthquake and tsunami killed 62 people, injured 248 and destroyed 800 houses. As observed in other recent tsunami disasters, most of the casualties were children. Nearly all eyewitnesses interviewed described the first wave as a leading-depression wave. Eyewitnesses reported that the main direction of tsunami propagation was SW in Subaang Bay, SE in Wawa and Calapan, NE on Baco Island and N on Verde Island, suggesting that the tsunami source area was in the southern Pass of Verde Island and that the wave propagated rapidly in all directions. The fault plane extended offshore to the N of Mindoro Island, with its rupture originating S of Verde Island and propagating almost directly south to the inland of Mindoro, thereby accounting for the relatively limited damage area observed on the N of Mindoro.     

Aquifer Characterization Using Fiber Bragg Grating Multi-Level Monitoring System

Groundwater responses measured from multiple wells at different depths are essential for delineating the aquifer heterogeneity using hydraulic tomography (HT). In general, conducting HT requires many wells because traditional well monitoring is usually partially open at a specific depth interval or is fully penetrating. Accordingly, conducting an HT survey is typically costly and time-consuming. To tackle these issues, a new multi-level monitoring system (MLMS) for the HT survey was developed using the fiber Bragg grating (FBG) technique. This FBG MLMS could collect the depth-discrete groundwater observations from a fully penetrated 2-inch well. Three field campaigns were conducted to validate the capability of the FBG MLMS for HT surveys. The results show that the accuracy and stability of this MLMS are reliable and that FBG MLMS is beneficial for conducting an HT survey. Specifically, compared to the traditional monitoring well in an injection event, this FBG MLMS can concurrently cause an increase in the number of cross-hole tests several times and collect many more head observations than the standard methods, resulting in the observed flow fields efficiently reaching ergodic conditions and effectively improving the accuracy of the estimated hydraulic heterogeneity. Therefore, the FBG MLMS could be an alternative MLMS for efficiently and economically conducting an HT survey.     

Rainfall network design using kriging and entropy

The spatial distribution of rainfall is related to meteorological and topographical factors. An understanding of the weather and topography is required to select the locations of the rain gauge stations in the catchment to obtain the optimum information. In theory, a well‐designed rainfall network can accurately represent and provide the needed information of rainfall in the catchment. However, the available rainfall data are rarely adequate in the mountainous area of Taiwan. In order to provide enough rainfall data to assure the success of water projects, the rainfall network based on the existing rain gauge stations has to be redesigned. A method composed of kriging and entropy that can determine the optimum number and spatial distribution of rain gauge stations in catchments is proposed. Kriging as an interpolator, which performs linear averaging to reconstruct the rainfall over the catchment on the basis of the observed rainfall, is used to compute the spatial variations of rainfall. Thus, the rainfall data at the locations of the candidate rain gauge stations can be reconstructed. The information entropy reveals the rainfall information of the each rain gauge station in the catchment. By calculating the joint entropy and the transmitted information, the candidate rain gauge stations are prioritized. In addition, the saturation of rainfall information can be used to add or remove the rain gauge stations. Thus, the optimum spatial distribution and the minimum number of rain gauge stations in the network can be determined. The catchment of the Shimen Reservoir in Taiwan is used to illustrate the method. The result shows that only seven rain gauge stations are needed to provide the necessary information. Copyright © 2007 John Wiley & Sons, Ltd.     

Major human Hepatitis A virus genotype in Hong Kong marine waters and detection by real-time PCR

Marine waters from seven sites around Hong Kong with varying levels of sewage pollution were analyzed for Hepatitis A virus (HAV) by PCR cloning and DNA sequencing of the highly variable VP1/2A junction of the HAV genome. Phylogenetic analysis of 10 PCR clones from each of the HAV-positive marine sites indicated that human HAV genotype IB is the most widely distributed type in Hong Kong waters. A sensitive and quantitative TaqMan-based PCR method targeting the 5′-noncoding region (5′-NCR) of HAV was used to quantify HAV particles in marine water samples along with the total Escherichiacoli counts being enumerated on TBX medium for comparison. Our results showed that no correlation of any significance between HAV and E. coli counts was observed which underscores the inadequacy in using E. coli as a sanitary standard to predict the levels of HAV in marine waters.     

Design of dampers for structures based on optimal control theory

The aim of this paper was to propose a design guideline for using visco‐elastic dampers for the control of building structures subjected to earthquake loading as well as suspension roof structures subjected to wind loading. The active control algorithm was used to calculate the control forces. Based on the single‐mode approach the control forces were transformed to the forces which visco‐elastic dampers can provide. Application of the method to the design of the building structure with passive damping devices in the bracing system and to the suspension roof with dampers was studied. Through the application of optimal control theory a systematic design procedure to implement dampers in structures is proposed. Copyright © 2000 John Wiley & Sons, Ltd.