Investigation of the failure mechanism and stabilization of a landslide in weathered tuffite,Giresun, northeastern Turkey

This study investigates the causes and failure mechanism of the Aksu landslide that occurred during the construction of the Giresun–Espiye road between KM: 1 + 030–1 + 170 in northern Turkey and recommends proper stabilization techniques. For the purpose of investigating the causes and mechanism of this slope failure, engineering geological mapping, geotechnical investigation and rock mass characterization were performed. From top to bottom, weathered tuffite, tuffite, flysch, and dacitic tuffite were the major units in the study area. The disturbance of the slope by the excavations performed at the toe of the slope (i.e., due to the foundation excavation for the Tünel restaurant building and for the road cut) led to a “translational slide”. The “translational slide” occurred in completely weathered tuffite due to the disturbance of the stability of the slope by the excavations performed at the toe of the slope, particularly for the foundation excavation of the Tünel restaurant building and for the road cut along the Giresun–Espiye road. The rise in the groundwater level was also another important factor that has contributed to the occurrence of the landslide. After establishing the geometry of the landslide in detail, the shear strength parameters of the failure surface were determined by the back analysis method. Sensitivity analyses were performed and landslide failure mechanisms were modeled to quantify the contributing factors that have caused the formation of the Aksu landslide. The influence of an earthquake was investigated through pseudostatic slope stability analysis. Toe buttressing, ground water drainage, and surface water drainage alternatives were considered for stabilizing the slope.     

Groundwater quality assessment and its suitability in Çeltikçi plain (Burdur/Turkey)

The Çeltikçi (Burdur) plain is located in the southwest of Turkey and is a semi-closed basin. Groundwater is densely used as drinking, irrigation and domestic water in the plain. Hydrogeochemical processes controlling groundwater chemistry and geochemical assessment of groundwater were investigated in the Çeltikçi (Burdur/Turkey) plain. In this study, groundwater samples for two seasons were analyzed and major ion chemistry of groundwater was researched to understand the groundwater geochemistry. Two major hydrochemical facies (Ca–HCO₃ and Ca–Mg–HCO₃) were determined in the area. Various graphical plots and multivariate statistical analysis were used for identifying the occurrence of different geochemical processes. In the study area, weathering is one of the key geochemical processes which controlled the solute concentration in groundwater. Chemical indexes such as sodium adsorption ratio, %Na, residual sodium carbonate, magnesium hazard and permeability index were calculated and results show that groundwater is suitable for irrigation purpose except for permeability index values. Concentrations of Mn, NO₃ and total hardness exceed the prescribed limits of WHO and are the major limiting parameters of groundwater use for potable and domestic purposes.     

Assessment of trace metal contents in water and bottom sediments from Eğirdir Lake,Turkey

The concentration of metals (Pb, As, Co, Cu, Ni, Zn, Fe and Mn) was investigated in water and sediment samples of E?irdir Lake. The Lake is the second largest fresh water lake of Turkey and it is used as drinking water in the region. The anthropogenic pollutants are primary sources of trace metals which are negatively affected lake water quality. These negative effects were observed in both lake water and bottom sediments. According to obtained data, Pb, Cu, Ni, Fe and Zn have significant enrichment in sediments samples. In addition, the hydrodynamic model of the lake was determined as effectively for Pb, Co, Cu, Ni, Zn, Fe and Mn accumulations. Also, the effect of anthropogenic pollutants was found to be more dominant than geogenic effect in metal accumulation of the lake bottom sediments. Therefore, anthropogenic pollutants within the lake basin should be consistently controlled for the sustainable usage of the lake.     

Comparative inverse analysis of satellite (MODIS) and ground (PM10) observations to estimate dust emissions in East Asia

Soil dust aerosol is the largest contributor to aerosol mass concentrations in the troposphere and has considerable effects on air quality and climate. Arid and semi-arid areas of East Asia are one of the important dust source regions thus it is crucial to understand dust mobilization and accurately estimate dust emissions in East Asia. However, present dust models still contain large uncertainties with dust emissions that remain a significant contributor to the overall uncertainties in the model. In this study, we attempt to reduce these uncertainties by using an inverse modeling technique and obtain optimized dust emissions. We use Moderate Resolution Imaging Spectrometer (MODIS) aerosol optical depths (AODs) and groundbased mass concentrations of particles less than 10 μm in aerodynamic diameter (PM₁₀) observations over East Asia in May 2007. The MODIS AODs are validated with AErosol RObotic NETwork (AERONET) AODs. The inversion uses the maximum a posteriori method and the GEOS-Chem chemical transport model (CTM) as a forward model. The model error is large over dust source regions including the Gobi Desert and Mongolia. We find that inverse modeling analyses from the MODIS and PM₁₀ observations consistently result in decrease of dust emissions over Mongolia and the Gobi Desert. Whereas over the Taklamakan Desert and Manchuria, the inverse modeling analyses from both observations yield contrast results such as increase of dust sources using MODIS AODs, while decrease of those using PM₁₀ observations. We discuss some limitations of both observations to obtain the optimized dust emissions and suggest several strategies for the improvement of dust emission estimates in the model.     

Variation in time-to-compliance for pump-and-treat remediation of mass transfer-limited aquifers with hydraulic conductivity heterogeneity

In this study, the impact of correlation length (λ) of hydraulic conductivity (K) heterogeneity on pump-and-treat (P&T) remediation period (time-to-compliance) for a mass transfer-limited aquifer is evaluated. Additionally, impacts of variance (σ ²), different distributions of high and low K zones and different initial contaminant masses are explored. Two different P&T policies including different number of wells pumping at different rates are employed for the investigation. Simulation–optimization approach in which a genetic algorithm (GA) is linked with a groundwater flow and contaminant transport model is used. Results show that K heterogeneity, in terms of λ _ln K , s_ln K² \sigma_{\ln \,K}^{2} and respective locations of low and high K zones, significantly impacts the time-to-compliance. Contaminant presence at low K zones can increase the time required to clean up the aquifer. Lower variation is observed in time-to-compliance for the remediation design utilizing higher number of wells pumping at slower rates compared to the design with a single well pumping at a higher rate. Higher number of wells increases the robustness of P&T remediation system when aquifer is heterogeneous in K.     

Metal (Al, Fe, Mn and Cu) distributions and origins of polycyclic aromatic hydrocarbons (PAHs) in the surface sediments of the Marmara Sea and the coast of Istanbul, Turkey

In this study, total metal (Al, Fe, Mn and Cu) and PAHs analyses have been done in the surface sediments. Sediment samples have been collected from seven parts of the Marmara Sea and the coast of Istanbul during 2009. Total Al, Fe, Mn and Cu contents vary between 1.8% and 5.4%; 1.1% and 2.8%; 122 and 259 μg g⁻¹; 27 and 416 μg g⁻¹, respectively. EF and CF values of Fe and Mn are lower than 1.5 and 1, respectively, in all the stations. Total PAH contents range between 135 and 6009 ng g⁻¹ in the surface sediments. The origin of PAHs has been found pyrolitic according to the Phe/Ant ratio in the all stations. Contrastingly, at K0, MKC and MY1 Stations, PAH origins have been observed petrogenic according to the Flu/Pyr ratio.     

Coprecipitation with Cu(II)‐4‐(2‐Pyridylazo)‐resorcinol for Separation and Preconcentration of Fe(III) and Ni(II) in Water and Food Samples

The coprecipitation method is widely used for the preconcentration of trace metal ions prior to their determination by flame atomic absorption spectrometry (FAAS). A simple and sensitive method based on coprecipitation of Fe(III) and Ni(II) ions with Cu(II)‐4‐(2‐pyridylazo)‐resorcinol was developed. The analytical parameters including pH, amount of copper (II), amount of reagent, sample volume, etc., were examined. It was found that the metal ions studied were quantitatively coprecipitated in the pH range of 5.0–6.5. The detection limits (DL) (n = 10, 3s/b) were found to be 0.68 µg L^?1 for Fe(III) and 0.43 µg L^?1 for Ni(II) and the relative standard deviations (RSD) were ≤4.0%. The proposed method was validated by the analysis of three certified reference materials (TMDA 54.4 fortified lake water, SRM 1568a rice flour, and GBW07605 tea) and recovery tests. The method was successfully applied to sea water, lake water, and various food samples.