Heterogeneous destruction of the North China Craton: Coupled constraints from seismology and geodynamic numerical modeling

The prevailing academic view regards mantle flow and the metasomatism triggered by the subduction of the Pacific plate as the cause and mechanism for the destruction of the North China Craton (NCC). However, the geodynamic destruction process remains ambiguous, necessitating detailed information at this stage. Combining the structural images obtained by the exploration of dense seismic arrays and the geodynamic simulations inspired by numerical modeling, this paper arrives at the following conclusions: the spatial variation of the P- and S-wave velocities, as well as their velocity ratio in the mantle transition zone, are key evidences of the nonuniform dehydration of the Pacific plate, the subducted plate induces hot upwellings in the mantle transition zone (MTZ), resulting in the heterogeneous distribution of the melt/fluid beneath the craton, characterized by small scale anomalies in the seismic velocity field, and as revealed by dense seismic array observation, the heterogeneities in the upper mantle structure and deformation are the synthetic results of lithospheric strain localization and the heterogeneous distribution of the melt/fluid. It is known that the nonuniform dehydration of the Pacific slab and the heterogeneous distribution of the melt/fluid have occured in the Cenozoic. If these scenarios could have already occurred in the Early Cretaceous, their interaction with the NCC lithosphere would be the dynamic mechanism for the heterogeneous lithospheric destruction of the NCC. The inference in this study is significant for further reconciling the multidisciplinary evidences in the NCC.     

Impact of anthropogenic drivers on subaqueous topographical change in the Datong to Xuliujing reach of the Yangtze River

Changes of subaqueous topography in shallow offshore water pose safety risks for embankments,navigation,and ports.This study conducted measurements of subaqueous topography between Datong and Xuliujing in the Yangtze River using a Sea Bat 7125 multi-beam echo sounder,and the channel change from 1998 to 2013 was calculated using historical bathymetry data.The study revealed several important results:(1)the overall pattern of changes through the studied stretch of the river was erosion–deposition–erosion.Erosion with a volume 700×10~6m~3occurred in the upper reach,deposition of about 204×10~6m~3occurred in the middle reach,and erosion of about 602×10~6m~3occurred in the lower reach.(2)Dunes are the most common microtopographic feature,accounting for 64.3%of the Datong to Xuliujing reach,followed by erosional topography and flat river topography,accounting for 27.6%and 6.6%,respectively.(3)Human activities have a direct impact on the development of the microtopography.For instance,the mining of sand formed holes on the surface of dunes with lengths of 20–35 m and depths of 3–5 m.We concluded that the overall trend of erosion(net erosion volume of 468×10~6m~3)occurred in the study area mainly because of the decreased sediment discharge following the closure of the Three Gorges Dam.However,other human activities were also impact factors of topographic change.Use of embankments and channel management reduced channel width,restricted river meandering,and exacerbated the erosion phenomenon.     

Optimal reduction of anthropogenic emissions for air pollution control and the retrieval of emission source from observed pollutants Ⅰ. Application of incomplete adjoint operator

The ultimate solution to anthropogenic air pollution depends on an adjustment and upgrade of industrial and energy structures. Before this process can be completed, reducing the anthropogenic pollutant emissions is an effective measure. This is a problem belonging to “Natural Cybernetics”, i.e., the problem of air pollution control should be solved together with the weather prediction; however, this is very complicated. Considering that heavy air pollution usually occurs in stable weather conditions and that the feedbacks between air pollutants and meteorological changes are insufficient, we propose a simplified natural cybernetics method. Here, an off-line air pollution evolution equation is first solved with data from a given anthropogenic emission inventory under the predicted weather conditions, and then, a related “incomplete adjoint problem” is solved to obtain the optimal reduction of anthropogenic emissions. Usually, such solution is sufficient for satisfying the air quality and economical/ social requirements. However, a better solution can be obtained by iteration after updating the emission inventory with the reduced anthropogenic emissions. Then, this paper discusses the retrieval of the pollutant emission source with a known spatio-temporal distribution of the pollutant concentrations, and a feasible mathematical method to achieve this is proposed. The retrieval of emission source would also help control air pollution.     

An acoustic-wave theory for casing bond evaluation using viscoelastic slip boundary modeling

Slip boundary condition is commonly utilized to model elastic wave propagation through layered earth media. The same approach is used here to characterize acoustic wave propagation along a cased borehole with various cement bond conditions. By modeling the cement layer between casing and formation as a viscoelastic slip interface with complex coupling rigidity parameters, one can not only reduce the complexity in the classical elastic wave modeling of the problem, but also efficiently model various complicated wave phenomena that are difficult for the existing modeling. More specifically, the new theory can well describe the effect of the cement bond condition change and the location of the change (i.e., whether it is in the first interface between casing and cement, or the second interface between cement and formation) on the acoustic waves, demonstrating the good modeling capability and predicting power. Application of the theory to field data shows that the theory can correctly model the acoustic wave characteristics and interpret the cement bond condition, thus providing a useful fundament theory for casing bond evaluation using acoustic logging.     

Rupture process of the 2015 Pishan earthquake from joint inversion of InSAR,teleseismic data and GPS

An earthquake of Mw6.4 occurred in Pishan County in Xinjiang Province, northwestern Tibetan Plateau, on July 3,2015. The epicenter was located on an active blind thrust system located at the northern margin of the Western Kunlun Mountain Orogenic Belt southwest of the Tarim Basin. We constructed a shovel-shaped fault model based on the layered-crust model with reference to the seismic reflection profile, and obtained the rupture process of the earthquake from the joint inversion of Interferometric Synthetic Aperture Radar(InSAR) measurements, far-field waveform data, and Global Positioning System(GPS) data. The results show that the seismic fault dips southward with a strike of 109°, and the rupture direction was essentially northward. The fault plane rupture distribution is concentrated, with a maximum recorded slip of 73 cm. The main features of the fault are as follows: low inclination angle(25°–10°), thrust slip at a depth of 9–13 km, rupture propagation time of about 12 s, no significant slip in soft or hard sedimentary layers at 0–4 km depth and propagation from the initial rupture point to the surrounding area with no obvious directionality. The InSAR time-series analysis method is used to determine the deformation rate in the source region within 2 years after the earthquake, and the maximum value is ~17 mm yr-1 in the radar line-of-sight direction. Obvious post-earthquake deformation is evident in the hanging wall, with a similar trend to the coseismic displacement field. These results suggest that the Pishan earthquake has not completely released the accumulated energy of the region, given that the multilayer fold structure above the blind fault is still in a process of slow uplift since the earthquake. Post-earthquake adjustment models and aftershock risk analysis require further study using more independent data.     

Human-induced changes in recent sedimentation rates in Bohai Bay,China: Implications for coastal development

In many countries, coastal planners strive to balance the demands between civil, commercial strategy and environmental conversation interests for future development, particularly given the sea level rise in the 21 st century. Achieving a sustainable balance is often a dilemma, especially in low-lying coastal areas where dams in inland river basin are trapping significant amounts of fluvial sediments. We recently investigated the shore of Bohai Bay in northern China where there has been a severe increase in sea level following a program of large-scale coastal reclamation and infrastructure development over the last five decades. To investigate this trend, we obtained sediment cores from near-shore in Bohai Bay, which were dated by ~(137)Cs and ~(210)Pb radionuclides to determine the sedimentation rates for the last 50 years. The average sedimentation rates of Bohai Bay exceeded 10 mm yr~(-1) before 1963, which was much higher than the rate of local sea-level rise. However, our results showed an overall decreasing sedimentation rate after 1963, which was not able to compensate for the increasing relative sea-level rise in that period. In addition, our results revealed that erosion occurred after the 1980 s in the shallow sea area of Bohai Bay. We suggest that this situation places the Bohai Bay coast at a greater risk of inundation and erosion within the next few decades than previously thought, especially in the large new reclamation area. This study may be a case study for many other shallow sea areas of the muddy coast if the sea level continues to rise rapidly and the sediment delivered by rivers continues to decrease.     

Carbon pools and fluxes in the China Seas and adjacent oceans

The China Seas include the South China Sea, East China Sea, Yellow Sea, and Bohai Sea. Located off the Northwestern Pacific margin, covering 4700000 km~2 from tropical to northern temperate zones, and including a variety of continental margins/basins and depths, the China Seas provide typical cases for carbon budget studies. The South China Sea being a deep basin and part of the Western Pacific Warm Pool is characterized by oceanic features; the East China Sea with a wide continental shelf, enormous terrestrial discharges and open margins to the West Pacific, is featured by strong cross-shelf materials transport; the Yellow Sea is featured by the confluence of cold and warm waters; and the Bohai Sea is a shallow semiclosed gulf with strong impacts of human activities. Three large rivers, the Yangtze River, Yellow River, and Pearl River, flow into the East China Sea, the Bohai Sea, and the South China Sea, respectively. The Kuroshio Current at the outer margin of the Chinese continental shelf is one of the two major western boundary currents of the world oceans and its strength and position directly affect the regional climate of China. These characteristics make the China Seas a typical case of marginal seas to study carbon storage and fluxes. This paper systematically analyzes the literature data on the carbon pools and fluxes of the Bohai Sea,Yellow Sea, East China Sea, and South China Sea, including different interfaces(land-sea, sea-air, sediment-water, and marginal sea-open ocean) and different ecosystems(mangroves, wetland, seagrass beds, macroalgae mariculture, coral reefs, euphotic zones, and water column). Among the four seas, the Bohai Sea and South China Sea are acting as CO_2 sources, releasing about0.22 and 13.86–33.60 Tg C yr~(-1) into the atmosphere, respectively, whereas the Yellow Sea and East China Sea are acting as carbon sinks, absorbing about 1.15 and 6.92–23.30 Tg C yr~(-1) of atmospheric CO_2, respectively. Overall, if only the CO_2 exchange at the sea-air interface is considered, the Chinese marginal seas appear to be a source of atmospheric CO_2, with a net release of 6.01–9.33 Tg C yr~(-1), mainly from the inputs of rivers and adjacent oceans. The riverine dissolved inorganic carbon (DIC) input into the Bohai Sea and Yellow Sea, East China Sea, and South China Sea are 5.04, 14.60, and 40.14 Tg C yr~(-1),respectively. The DIC input from adjacent oceans is as high as 144.81 Tg C yr~(-1), significantly exceeding the carbon released from the seas to the atmosphere. In terms of output, the depositional fluxes of organic carbon in the Bohai Sea, Yellow Sea, East China Sea, and South China Sea are 2.00, 3.60, 7.40, and 5.92 Tg C yr~(-1), respectively. The fluxes of organic carbon from the East China Sea and South China Sea to the adjacent oceans are 15.25–36.70 and 43.93 Tg C yr~(-1), respectively. The annual carbon storage of mangroves, wetlands, and seagrass in Chinese coastal waters is 0.36–1.75 Tg C yr~(-1), with a dissolved organic carbon(DOC) output from seagrass beds of up to 0.59 Tg C yr~(-1). Removable organic carbon flux by Chinese macroalgae mariculture account for 0.68 Tg C yr~(-1) and the associated POC depositional and DOC releasing fluxes are 0.14 and 0.82 Tg C yr~(-1), respectively. Thus, in total, the annual output of organic carbon, which is mainly DOC, in the China Seas is 81.72–104.56 Tg C yr~(-1). The DOC efflux from the East China Sea to the adjacent oceans is 15.00–35.00 Tg C yr~(-1). The DOC efflux from the South China Sea is 31.39 Tg C yr~(-1). Although the marginal China Seas seem to be a source of atmospheric CO_2 based on the CO_2 flux at the sea-air interface, the combined effects of the riverine input in the area, oceanic input, depositional export,and microbial carbon pump(DOC conversion and output) indicate that the China Seas represent an important carbon storage area.     

Hydrologic implications of the isotopic kinetic fractionation of open-water evaporation

The kinetic fractionation of open-water evaporation against the stable water isotope H_2 ~(18)O is an important mechanism underlying many hydrologic studies that use ~(18)O as an isotopic tracer. A recent in-situ measurement of the isotopic water vapor flux over a lake indicates that the kinetic effect is much weaker(kinetic factor 6.2‰) than assumed previously(kinetic factor14.2‰) by lake isotopic budget studies. This study investigates the implications of the weak kinetic effect for studies of deuterium excess-humidity relationships, regional moisture recycling, and global evapotranspiration partitioning. The results indicate that the low kinetic factor is consistent with the deuterium excess-humidity relationships observed over open oceans.The moisture recycling rate in the Great Lakes region derived from the isotopic tracer method with the low kinetic factor is a much better agreement with those from atmospheric modeling studies than if the default kinetic factor of 14.2‰ is used. The ratio of transpiration to evapotranspiration at global scale decreases from 84±9%(with the default kinetic factor) to 76±19%(with the low kinetic factor), the latter of which is in slightly better agreement with other non-isotopic partitioning results.     

Lineaments in the Shamakhy–Gobustan and Absheron hydrocarbon containing areas using gravity data

In this study, we purposed to investigate the edge of geostructures and position of existing faults of the Shamakhy–Gobustan and Absheron hydrocarbon containing regions in Azerbaijan. For this purpose, the horizontal gradient, analytic signal, tilt angle, and hyperbolic of tilt angle methods were applied to the first vertical derivative of gravity data instead of Bouguer gravity data. We obtained the maps that show the previous lineaments which were designated by considering the maximum contours of horizontal gradient, analytic signal maps, and zero values of tilt angle, hyperbolic of tilt angle maps. The geometry of basement interface was also modeled utilizing the Parker–Oldenburg algorithm to understand the sediment thickness and coherency or incoherency between the gravity values and basement topography. The lineaments were held a candle to most current tectonic structure map of the study area. It was seen that the techniques used in this study are very effective to determine the old and new lineaments in the Shamakhy–Gobustan and Absheron regions. The epicenter distribution of earthquakes within the study area supports the new lineaments which are extracted by our interpretation. We concluded that better comprehension of Azerbaijan geostructures and its effect on the large scale works will be provided by means of this study.     

A first arrival detection method for low SNR microseismic signal

Most of the microseismic signals have low signal-to-noise ratio (SNR) due to the strong background noise, which makes it difficult to locate the first arrival time. Both accuracy and stability of conventional methods are poor in this situation. To overcome this problem, here we proposed a new method based on the adaptive Morlet wavelet and principal component analysis process in wavelet coefficients matrix. The three components of microseismic signal make it possible to extract the features in wavelet coefficients domain. Then the reconstructed signal from weighted features presents an obvious first arrival. Tests on synthetic signals and real data provide a solid evidence for its feasibility in low SNR microseismic signal.