Economic geography as regional contexts’ reconsidered – implications for disciplinary division of labour,research focus and societal relevance

ABSTRACT

The aim of the article is to discuss whether a definition of economic geography as contextual analysis still is viable and relevant. The author argues that the definition remains the key to the production of high quality and social relevant research. He concludes that contextual analysis represents the competitive advantage of economic geography among other social sciences and the best position to demonstrate its relevance to the broader society.     

Exploring the reservoir potential of Lower Cretaceous Clinoforms in the Fingerdjupet Subbasin,Norwegian Barents Sea

Sandy clinothems are of interest as hydrocarbon reservoirs but there is no proven, economic, clinothem reservoir in the Norwegian Barents Sea. We used high-resolution, 2D and 3D seismic, including proprietary data, to identify a previously untested, Barremian, clinoform wedge in the Fingerdjupet Subbasin (FSB). Data from recent well 7322/7-1 plus seismic have been used to characterize this wedge and older Lower Cretaceous clinoforms in the FSB. In the latest Hauterivian – early Barremian, during post-rift tectonic quiescence, shelf-edge clinoforms (foreset height > 150 m) prograded into an under-filled basin. Increased sediment input was related to regional uplift of the hinterland (northern Barents Shelf). Early Barremian erosion in the north-western FSB and mass wasting towards the SE were followed by deposition of delta-scale (<80 m high), high-angle (c. 8°) clinoform sets seaward of older shelf-edge clinoforms. This may be the local expression of a regional, early Barremian, regressive event. By the close of the Barremian, clinoforms had prograded, within a narrow, elongate basin, across the FSB and towards the uplifted Loppa High. A seismic wedge of high-angle (10–12°), low-relief, delta-scale (25–80 m) clinoform sets occurs between shelf-edge clinoforms to the NW and the uplifted area to the SE. Well 7322/7-1, positioned on a direct hydrocarbon indicator, <1 km NNW of the high-angle, low-relief, delta-scale clinoforms, found upward coarsening siltstone-cycles linked to relative sea-level fluctuations on a marine shelf. Sand may have accumulated, offshore from the well, in high-angle, low-relief foresets of the delta-scale clinothems (which are typical geometries elsewhere interpreted as ‘delta-scale, sand-prone subaqueous clinoforms’). Deposition was controlled by the paleosurface, storms and longshore currents on an otherwise mud-dominated shelf. The study highlights challenges associated with exploration for sandstone reservoirs in seismic wedges on an outer shelf.     

Alternating-code experiment for plasma-line studies

We present results of the first plasma-line measurement of the incoherent spectrum using the alternating-code technique with the EISCAT VHF radar. This technique, which has earlier mostly been used to measure high-resolution E-region ion-line spectra, turned out to be a very good alternative to other techniques for plasma-line measurements. The experiment provides simultaneous measurement of the ion line and downshifted and upshifted plasma-line spectra with an altitude resolution of 3 km and a temporal resolution of 10 s. The measurements are taken around the peak of the F region, but not necessarily at the peak itself, as is the case with the long-pulse technique. The condition for success is that the scale height should be large enough such that the backscattered signal from the range extent of one gate falls inside the receiver filter. The data are analyzed and the results are combined with the results of the ion-line data analysis to estimate electron mean drift velocity and thereafter electric currents along the line of sight of the radar using both the standard dispersion relation assuming a Maxwellian electron velocity distribution and the more recent model including a heat-flow correction term.     

An upscaling method for one‐phase flow in heterogeneous reservoirs. A weighted output least squares (WOLS) approach

In this paper we study the problem of determining the effective permeability on a coarse scale level of problems with strongly varying and discontinuous coefficients defined on a fine scale. The upscaled permeability is defined as the solution of an optimization problem, where the difference between the fine scale and the coarse scale velocity field is minimized. We show that it is not necessary to solve the fine scale pressure equation in order to minimize the associated cost‐functional. Furthermore, we derive a simple technique for computing the derivatives of the cost‐functional needed in the fix‐point iteration used to compute the optimal permeability on the coarse mesh. Finally, the method is illustrated by several analytical examples and numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Geochemical and mineralogical properties of sulfide-bearing fine-grained sediments in Finland

 The geochemical and mineralogical characteristics of bulk samples and various size fractions of sulfide-bearing fine-grained sediments in the Petalax area, western Finland, were studied with ICP-AES (aqua regia digestion and "total" digestion) and X-ray diffraction. The sediments, which are dominated by particles <0.06 mm (clay and silt size), are composed of phyllosilicates (micas, kaolinite, chlorite, vermiculite), quartz, feldspars, amphiboles, organic matter, and secondary S minerals. The chemical analyses show that Na, Ca, and Sr are enriched in the silt and sand fractions, that Zr is enriched in the silt fraction, and that the concentrations of all other studied metals (Al, Ba, Co, Cr, Cu, Fe, K, La, Mg, Mn, Nb, Ni, Sc, Th, Ti, V, Y, and Zn) increase from the sand to the clay fraction. Sodium, Ca, and Sr occur largely in poorly dissolved feldspars, which explains the distribution of these metals in the sediments. The increase in the concentrations of most metals in the clay fraction is interpreted to be the result mainly of an increase in phyllosilicates in this size fraction. A geochemical comparison between the sulfide-bearing fine-grained sediments and glacial till shows that the former are enriched in several potentially toxic metals. It is therefore argued that the hydrological and ecological problems associated with the sulfide-bearing sediments are related not only to the production of acidity in oxidized layers, but also to mobilization and dispersion of toxic metals. Strategies to minimize damage of freshwater systems in areas covered with sulfide-bearing fine-grained sediments are suggested. Received: 20 February 1997 · Accepted: 25 August 1997     

Anomalous echoes observed with the EISCAT UHF radar at 100-km altitude

We have observed a number of strong echoes with the European incoherent-scatter (EISCAT) UHF (930-MHz) radar at angles 83.5° and 78.6° with the geomagnetic field and at about 100-km altitude north in the auroral zone. The echoes are shortlived and occur in single 2- or 10-s data dumps. They are offset by 125–130 kHz with respect to the transmitted frequency. In most cases the offset compares well with the frequency of gyro lines in the incoherent-scatter spectrum, as given by the standard linear dispersion relation. But sometimes the measured offsets deviate significantly from the model calculations, and the interpretation in terms of gyro lines becomes questionable. The discrepancy could possibly be explained by local deviations in the magnetic field from the model (IGRF 1987), which are generated by incoming particle beams. A more serious problem with the gyro-line theory is how the line can be excited at altitudes where the collisional damping is substantial. The high intensity and short lifetime of the signal point to a fast-growing plasma instability as the likely excitation mechanism, if the gyro-line interpretation is correct. The cause of the instability could be the same particle beams as those causing the disturbances in the magnetic field. Alternatively, the observations may be interpreted as meteor head echoes. The large Doppler shifts, the short lifetimes and the altitudes of the signals support this explanation. The main difficulty is that the distribution of measured offsets appears to be different in magnetically active conditions and in less active conditions. Also, the occurrence of echoes does not seem to follow the expected changes in meteor density. More observations in different conditions are needed to decide between the two interpretations. As it is, we are inclined to believe in the meteor head echo theory, the objections to the gyro-line theory being more fundamental.     

Thermal history of Northwest Africa 5073––A coarse‐grained Stannern‐trend eucrite containing cm‐sized pyroxenes and large zircon grains

Abstract– We report on the bulk chemical composition, petrology, oxygen isotopic composition, trace element composition of silicates, and degree of self‐irradiation damage on zircon grains of the eucrite Northwest Africa (NWA) 5073 to constrain its formation and postcrystallization thermal history, and to discuss their implications for the geologic history of its parent body. This unequilibrated and unbrecciated meteorite is a new member of the rare Stannern‐trend eucrites. It is mainly composed of elongated, zoned pyroxene phenocrysts up to 1.2 cm, plagioclase laths up to 0.3 cm in length, and is rich in mesostasis. The latter contains zircon grains up to 30 μm in diameter, metal, sulfide, tridymite, and Ca‐phosphates. Textural observations and silicate compositions, coupled with the occurrence of extraordinary Fe‐rich olivine veins that are restricted to large pyroxene laths, indicate that NWA 5073 underwent a complex thermal history. This is also supported by the annealed state of zircon grains inferred from μ‐Raman spectroscopic measurements along with U and Th data obtained by electron probe microanalyses.     

Heavy-metal pollution of sediments from the Polish exclusive economic zone,southern Baltic Sea

Analysis of 59 surface sediment samples from the Polish exclusive economic zone (EEZ) shows that Szczecin Lagoon sediments are the most polluted by heavy metals and that the degree of heavy-metal pollution decreases substantially on passing from the Szczecin Lagoon to the Pomeranian Bay and the inner shelf area and then on passing to the Bornholm Deep and Słupsk Furrow. Heavy-metal pollution in the sediments of the western part of the Polish EEZ therefore appears to follow the dispersion of the Oder River. Fluffy material from the Oder estuary appears to be the main source of heavy metals in the muddy sediments of the Bornholm Deep. The formation of sulphides is therefore not the principal factor controlling the enrichment of heavy metals in the sediments of this anoxic basin, although it may be responsible for the uptake of Mo, Sb and As. Two main factors control the distribution of the rare earth elements (REE) in sediments of the Polish EEZ: the input of Fe-organic colloids from rivers and the presence of detrital material in the sediments.     

Estimation of geological dip and reflector curvature from zero-offset seismic reflections in heterogeneous anisotropic media

Depth conversion of selected seismic reflections is a valuable procedure to position key reflectors in depth in a process of constructing or refining a depth-velocity model. The most widespread example of such procedure is the so-called map migration, in which normal-incidence, zero-offset (stacked) seismic data are employed. Since the late seventies and early eighties, under the assumption of an isotropic velocity model, map migration algorithms have been devised to convert traveltime and its first and second derivatives into reflector position, dip and curvatures in depth. In this work we revisit map migration to improve the existing algorithms in the following accounts: (a) We allow for fully anisotropic media; (b) In contrast to simple planar measurement surface, arbitrary topography is allowed, thus enlarging the algorithms applicability and (c) Derivations and results are much simplified upon the use of the methodology of surface-to-surface paraxial matrices.