Discovery of Jurassic ammonoids from the Shyok suture zone to the northeast of Chang La Pass, Ladakh, northwest India and its tectonic significance

Abstract   Callovian (late Middle Jurassic) ammonoids Macrocephalites and Jeanneticeras were recovered from the Shyok suture zone, northeast of Chang La Pass, Ladakh, northwest India. They are the first reliable Jurassic fossils and the oldest chronologic data from the Shyok suture zone. The ammonoid-bearing Jurassic strata, newly defined as the Tsoltak Formation, consist largely of terrigenous mudstone with thin sandstone beds and were probably a part of the continental basement to the Cretaceous Ladakh Arc.     

A Simple Theoretical Radiation Scheme for Regular Building Arrays

We propose a simple theoretical radiation scheme for regular building arrays. The essential difference of the present radiation scheme from the previous ones is the explicit consideration of the three-dimensional features of the surface geometry. The model is assumed to be an infinitely extended regular array of uniform buildings, each building composed of six faces (roof, floor, and four vertical walls). Without using time-consuming iterations or statistical approaches, we calculated the view factors of the faces, the complicated sunlit--shadow distributions, and the resulting canopy albedo for any time and location. The model was evaluated by comparing to outdoor experiments in a wide range of seasons and surface geometries. The simulated canopy albedos agreed well with measured values, and the accuracy is a significant improvement over two-dimensional-based model outputs.     

A practical model to estimate photosynthetically active radiation using general meteorological elements in a temperate humid area and comparison among models

Although accurately evaluating photosynthetically active radiation is important, much effort is required to measure this radiation using a quantum sensor. We develop a new model that makes estimates using only general meteorological data—solar radiation, atmospheric pressure, air temperature, and relative humidity. Root mean square deviations for eight datasets at five sites in Japan were smaller than 5.2 %, similar to error in other studies and to individual differences of quantum sensors. Most root mean square deviations of nine previous models and our eight datasets are larger than that of the new estimation model, which performed well. This suggests that the model is useful for estimating photosynthetically active radiation in a temperate, humid area of Japan.     

Effect of hydrogen on the melting temperature of FeS at high pressure: Implications for the core of Ganymede

We have carried out in situ X-ray diffraction experiments on the FeS–H system up to 16.5 GPa and 1723 K using a Kawai-type multianvil high-pressure apparatus employing synchrotron X-ray radiation. Hydrogen was supplied to FeS from the thermal decomposition of LiAlH₄, and FeSH_x was formed at high pressures and temperatures. The melting temperature and phase relationships of FeSH_x were determined based on in situ powder X-ray diffraction data. The melting temperature of FeSH_x was reduced by 150–250 K comparing with that of pure FeS. The hydrogen concentration in FeSH_x was determined to be x = 0.2–0.4 just before melting occurred between 3.0 and 16.5 GPa. It is considered that sulfur is the major light element in the core of Ganymede, one of the Galilean satellites of Jupiter. Although the interior of Ganymede is differentiated today, the silicate rock and the iron alloy mixed with H₂O, and the iron alloy could react with H₂O (as ice or water) or the hydrous silicate before the differentiation occurred in an early period, resulting in a formation of iron hydride. Therefore, Ganymede's core may be composed of an Fe–S–H system. According to our results, hydrogen dissolved in Ganymede's core lowers the melting temperature of the core composition, and so today, the core could have solid FeSH_x inner core and liquid FeH_x–FeSH_x outer core and the present core temperature is considered to be relatively low.     

The infrared variability of a dust model for Seyfert galaxies

Assuming a dust model of Reeset al. (1969), we study the time dependence of the infrared emission from grains which absorb variable ultraviolet radiation. A time scale for the variability is shown to be fairly small compared with the light travel-time across the infrared emitting region, of which size depends on the wavelength strongly. Comparison of calculated infrared light curves with observations of NGC 4151 leads to the conclusion that the variability at 2.2 is consistent with interpretation by the infrared emission on the basis of thermal process.     

The compressibility of Fe- and Al-bearing phase D to 30 GPa

High-pressure in situ X-ray diffraction experiment of Fe- and Al-bearing phase D (Mg_0.89Fe_0.14Al_0.25Si_1.56H_2.93O₆) has been carried out to 30.5 GPa at room temperature using multianvil apparatus. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields values of V ₀ = 86.10 ± 0.05 ų; K ₀ = 136.5 ± 3.3 GPa and K′ = 6.32 ± 0.30. If K′ is fixed at 4.0 K ₀ = 157.0 ± 0.7 GPa, which is 6% smaller than Fe–Al free phase D reported previously. Analysis of axial compressibilities reveals that the c-axis is almost twice as compressible (K _c  = 93.6 ± 1.1 GPa) as the a-axis (K _a  = 173.8 ± 2.2 GPa). Above 25 GPa the c/a ratio becomes pressure independent. No compressibility anomalies related to the structural transitions of H-atoms were observed in the pressure range to 30 GPa. The density reduction of hydrated subducting slab would be significant if the modal amount of phase D exceeds 10%.     

Interaction of peridotite with Ca-rich carbonatite melt at 3.1 and 6.5 GPa: Implication for merwinite formation in upper mantle,and for the metasomatic origin of sublithospheric diamonds with Ca-rich suite of inclusions

We performed an experimental study, designed to reproduce the formation of an unusual merwinite?+?olivine-bearing mantle assemblage recently described as a part of a Ca-rich suite of inclusions in sublithospheric diamonds, through the interaction of peridotite with an alkali-rich Ca-carbonatite melt, derived from deeply subducted oceanic crust. In the first set of experiments, we studied the reaction between powdered Mg-silicates, olivine and orthopyroxene, and a model Ca-carbonate melt (molar Na:K:Ca?=?1:1:2), in a homogeneous mixture, at 3.1 and 6.5 GPa. In these equilibration experiments, we observed the formation of a merwinite?+?olivine-bearing assemblage at 3.1 GPa and 1200 °C and at 6.5 GPa and 1300–1400 °C. The melts coexisting with this assemblage have a low Si and high Ca content (Ca#?=?molar 100?×?Ca/(Ca?+?Mg)?>?0.57). In the second set of experiments, we investigated reaction rims produced by interaction of the same Ca-carbonate melt (molar Na:K:Ca?=?1:1:2) with Mg-silicate, olivine and orthopyroxene, single crystals at 3.1 GPa and 1300 °C and at 6.5 GPa and 1400 °C. The interaction of the Ca-carbonate melt with olivine leads to merwinite formation through the expected reaction: 2Mg₂SiO₄ (olivine)?+?6CaCO₃ (liquid)?=?Ca₃MgSi₂O₈ (merwinite)?+?3CaMg(CO₃)₂ (liquid). Thus, our experiments confirm the idea that merwinite in the upper mantle may originate via interaction of peridotite with Ca-rich carbonatite melt, and that diamonds hosting merwinite may have a metasomatic origin. It is remarkable that the interaction of the Ca-carbonate melt with orthopyroxene crystals does not produce merwinite both at 3.1 and 6.5 GPa. This indicates that olivine grain boundaries are preferable for merwinite formation in the upper mantle.     

Study of pocyclic aromatic hydrocarbons at a pressure of 6–9 GPa with X-ray diffraction and synchrotron radiation

This work is one of the stages of study of the deep C-O-H fluid and investigates the behavior of polycyclic aromatic hydrocarbons (PAHs) under conditions of the Earth’s mantle. The composition of the C-O-H fluid in the upper mantle is estimated as a mixture of H₂O and CH₄ with a minor amount of H₂ and heavier hydrocarbons. Some theoretical calculations show that the stability of heavy hydrocarbons (alkanes, alkenes, and PAHs) increases with an increase in temperature. This paper presents the results of an XRD study of PAHs stability in multianvil presses on a Spring-8 accelerator (Japan). The primary compositions were chosen according to the abundance of PAHs in nature. In situ diffraction spectrums were recorded to determine the PAHs stability field. It was established that the PAHs become unstable at a pressure of 6–9 GPa and a temperature of 873–1073 K.     

Phase relations and melting of carbonated peridotite between 10 and 20 GPa: a proxy for alkali- and CO<Subscript>2</Subscript>-rich silicate melts in the deep mantle

We determined the melting phase relations, melt compositions, and melting reactions of carbonated peridotite on two carbonate-bearing peridotite compositions (ACP: alkali-rich peridotite + 5.0 wt % CO₂ and PERC: fertile peridotite + 2.5 wt % CO₂) at 10–20 GPa and 1,500–2,100 °C and constrain isopleths of the CO₂ contents in the silicate melts in the deep mantle. At 10–20 GPa, near-solidus (ACP: 1,400–1,630 °C) carbonatitic melts with < 10 wt % SiO₂ and > 40 wt % CO₂ gradually change to carbonated silicate melts with > 25 wt % SiO₂ and < 25 wt % CO₂ between 1,480 and 1,670 °C in the presence of residual majorite garnet, olivine/wadsleyite, and clinoenstatite/clinopyroxene. With increasing degrees of melting, the melt composition changes to an alkali- and CO₂-rich silicate melt (Mg# = 83.7–91.6; ~ 26–36 wt % MgO; ~ 24–43 wt % SiO₂; ~ 4–13 wt % CaO; ~ 0.6–3.1 wt % Na₂O; and ~ 0.5–3.2 wt % K₂O; ~ 6.4–38.4 wt % CO₂). The temperature of the first appearance of CO₂-rich silicate melt at 10–20 GPa is ~ 440–470 °C lower than the solidus of volatile-free peridotite. Garnet + wadsleyite + clinoenstatite + carbonatitic melt controls initial carbonated silicate melting at a pressure < 15 GPa, whereas garnet + wadsleyite/ringwoodite + carbonatitic melt dominates at pressure > 15 GPa. Similar to hydrous peridotite, majorite garnet is a liquidus phase in carbonated peridotites (ACP and PERC) at 10–20 GPa. The liquidus is likely to be at ~ 2,050 °C or higher at pressures of the present study, which gives a melting interval of more than 670 °C in carbonated peridotite systems. Alkali-rich carbonated silicate melts may thus be produced through partial melting of carbonated peridotite to 20 GPa at near mantle adiabat or even at plume temperature. These alkali- and CO₂-rich silicate melts can percolate upward and may react with volatile-rich materials accumulate at the top of transition zone near 410-km depth. If these refertilized domains migrate upward and convect out of the zone of metal saturation, CO₂ and H₂O flux melting can take place and kimberlite parental magmas can be generated. These mechanisms might be important for mantle dynamics and are potentially effective metasomatic processes in the deep mantle.