Transport of dissolved methoxy-nonafluorobutane through a saturated column

Solute transport experiments were conducted in a one-dimensional saturated column using dissolved methoxy-nonafluorobutane (HFE-7100), a Novec engineered fluid developed by the 3M Corporation, as the solute. Novec engineered fluids are considered dense non-aqueous phase liquids (DNAPLs) because they are immiscible with water and have a specific gravity greater than one. The HFE-7100 fluid is safer and environmentally friendlier than common DNAPL contaminants such as tetrachloroethylene (PCE) or trichloroethylene (TCE); thus, it is an ideal substitute DNAPL for laboratory groundwater contamination research. Three sets of solute transport experiments were conducted. The first set of experiments was conducted in a glass-bead-packed column using dissolved HFE-7100 as the solute. The second set of experiments was conducted in a sand-packed column using dissolved HFE-7100 as the solute. The third set of experiments was conducted in a sand-packed column using dissolved PCE as the solute. The dissolved HFE-7100 column breakthrough concentrations were compared with dissolved PCE breakthrough concentrations. Results show that the one-dimensional solute transport equation was successful in describing the transport behavior of dissolved HFE-7100. This study demonstrates that the HFE-7100 fluid can be used as a safer substitute DNAPL for groundwater contaminant dissolution and transport research.     

Comparison of the Ordovician-Carboniferous Boundary Between Korea and NE China: Implications for Correlation and Tectonic Evolution

There is a great hiatus between Ordovician and Carboniferous strata in the Northeast China and Korean Peninsula. In order to understand geology and tectonic evolution, and to find out the similarities and differences in both regions, two sections in the Western Hill near Beijing in NE China and several sections in the Korean Peninsula were selected to examine their geologic boundaries between Lower and Upper Paleozoic strata to compare their characteristic features. At four sites in the two sections in the Western Hill near Beijing were examined their contact relations. The Hui Yu section is the same horizon where one site is top of a quarry hill and the other of down hill. Mid-Carboniferous Qingshuijian Formation rests on the Ordovician Majiagou Formation. Limestone beds are more commonly intercalated with shale and sandstone at site 2 of the Hui Yu section, while at site 1, conglomerate beds are dominant. Site 1 of the Se Shu Fen section shows eroded and concealed karst topography and conglomerate beds are intercalated within shale beds. Silurian and Devonian strata are absent in these areas. In the Korean Peninsula, most O-C contacts occur between Ordovician limestone formation and Carboniferous strata, although Silurian strata occur beneath the Carboniferous strata in the Jeongseon area and Pyeongnam Basin. Most contact relations are parallel unconformity and angular unconformity is rarely seen. The O-C relations in both regions are similar to each other, and these indicate that the Korean Peninsula was located near or belonged to the Sino-Korean paraplatform during Paleozoic time.     

Sulfate Reduction and Sulfur Cycles at Two Seagrass Beds Inhabited by Cold Affinity <Emphasis Type="Italic">Zostera marina</Emphasis> and Warm Affinity <Emphasis Type="Italic">Halophila nipponica</Emphasis> in Temperate Coastal Waters

To evaluate the impact of invading seagrass on biogeochemical processes associated with sulfur cycles, we investigated the geochemical properties and sulfate reduction rates (SRRs) in sediments inhabited by invasive warm affinity Halophila nipponica and indigenous cold affinity Zostera marina. A more positive relationship between SRR and below-ground biomass (BGB) was observed at the H. nipponica bed (SRR = 0.6809 × BGB ? 4.3162, r ² = 0.9878, p = 0.0006) than at the Z. marina bed (SRR = 0.3470 × BGB ? 4.0341, r ² = 0.7082, p = 0.0357). These results suggested that SR was more stimulated by the dissolved organic carbon (DOC) exuded from the roots of H. nipponica than by the DOC released from the roots of Z. marina. Despite the enhanced SR in spring-summer, the relatively lower proportion (average, 20%) of acid-volatile sulfur (AVS) in total reduced sulfur and the strong correlation between total oxalate-extractable Fe (Fe_(oxal)) and chromium-reducible sulfur (CRS = 0.2321 × total Fe_(oxal) + 1.8180, r ² = 0.3344, p = 0.0076) in the sediments suggested the rapid re-oxidation of sulfide and precipitation of sulfide with Fe. The turnover rate of the AVS at the H. nipponica bed (0.13 day^?1) was 2.5 times lower than that at the Z. marina bed (0.33 day^?1). Together with lower AVS turnover, the stronger correlation of SRR to BGB in the H. nipponica bed suggests that the extension of H. nipponica resulting from the warming of seawater might provoke more sulfide accumulation in coastal sediments.     

Finite Element Solvers for Biot’s Poroelasticity Equations in Porous Media

We study and compare five different combinations of finite element spaces for approximating the coupled flow and solid deformation system, so-called Biot’s equations. The permeability and porosity fields are heterogeneous and depend on solid displacement and fluid pressure. We provide detailed comparisons among the continuous Galerkin, discontinuous Galerkin, enriched Galerkin, and two types of mixed finite element methods. Several advantages and disadvantages for each of the above techniques are investigated by comparing local mass conservation properties, the accuracy of the flux approximation, number of degrees of freedom (DOF), and wall and CPU times. Three-field formulation methods with fluid velocity as an additional primary variable generally require a larger number of DOF, longer wall and CPU times, and a greater number of iterations in the linear solver in order to converge. The two-field formulation, a combination of continuous and enriched Galerkin function space, requires the fewest DOF among the methods that conserve local mass. Moreover, our results illustrate that three out of the five methods conserve local mass and produce similar flux approximations when conductivity alteration is included. These comparisons of the key performance indicators of different combinations of finite element methods can be utilized to choose the preferred method based on the required accuracy and the available computational resources.

     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Satellite altimetry for measuring river stages in remote regions

The advent in satellite altimetry with the most accurate satellite radar altimeter since 1992 and its successive missions have enabled the routine global monitoring of water-level (or stage) for surface waters and changes in the quantities of dammed water reservoirs. However, satellite altimeter measurements typically have spatial resolution capable of observing only large water bodies, such as major lakes and rivers. This paper addresses the challenges of how to investigate water levels in medium (~?1 km in width) to small (~?100 m and narrower) rivers. Comparisons between the ENVISAT altimetry ICE-1 waveform retracking height and standard water-level measurements for multiple sections of Ohio River, Columbia River, and Red River of the North in the United States (US) reveals that the satellite altimetry measured water levels agree well with those observed at nearby US Geological Survey gaging stations over the 10-year period starting from 2002. The significant results include those obtained at Thompson, North Dakota (ND, correlation coefficient or R value of 0.76 between satellite and in situ water-level measurements) and Fargo, ND (R?=?0.74), where the stream channels of Red River are merely?~?50 m and ~?40 m wide, respectively, under normal climatic conditions. In addition, demonstrations of the approach over largely inaccessible portions of Tigris–Euphrates Rivers and Helmand River in the Middle East aided in understanding hydrology in these systems. This study demonstrates the ability of satellite radar altimetry to characterize rivers in these study regions which are much narrower than 100 m in width.     

Distribution and Removal of Silver and Lead in the Nearshore Waters of Western Taiwan

Concentrations of Al, Mn, Fe, Ag, and Pb in dissolved and particulate phases of the surface water were determined at 15 stations along the coastline off western Taiwan in April of 2007. This study presents the first set of data for Al, Ag, and Pb in the nearshore waters. Latitudinal distribution of these metals showed that high values were present in the regions affected by high fluvial discharge from the Dan-Sui River and the Cho-Sui River. Using the particle fluxes from ²¹⁰Po/²¹⁰Pb disequilibria, the removal fluxes and the residence times of the trace metals were calculated. Based on the K _d values, the sequence of particle affinity of trace metals, Fe ~ Al >> Pb > Mn > Ag, was found. The correlation of the residence times and of the partitioning coefficients of multiple metals in the nearshore waters implies that the affinities to the particles determine the geochemical cycling of metals in the coastal water.     

Hydrologic modelling of the effect of snowmelt and temperature on a mountainous watershed

Snowmelt-runoff modelling in a mountainous basin is perceived as difficult due to the complexity of simulation. Theoretically, the snowmelt process should be influenced by temperature changes. It is still controversial as how to incorporate the temperature changes into the snowmelt-runoff model in a mountainous basin. This paper presents the results of a study in the North Fork American River basin where the snowmelt-runoff mechanism is modelled by relating the temperature changes to the elevation band in the basin. In this study, a distributed hydrologic model is used to explore the orographic effects on the snowmelt-runoff using the snowfall-snowmelt routine in Soil and Water Assessment Tool (SWAT). Three parameters, namely maximum snowmelt factor, minimum snowmelt factor, and snowpack temperature lag were analysed during the simulation. The model was validated using streamflow data from October 1, 1991 to September 30, 1994 with and without considering the elevation band. The result of this study suggests that the snowmelt-runoff model associated with the elevation band better represents the snowmelt-runoff mechanism in terms of Nash–Sutcliffe coefficient (E _NS ), R ², and Root Mean Square Error (RMSE).     

A case study for the integration of predictive mineral potential maps

This study aims to elaborate on the mineral potential maps using various models and verify the accuracy for the epithermal gold (Au) — silver (Ag) deposits in a Geographic Information System (GIS) environment assuming that all deposits shared a common genesis. The maps of potential Au and Ag deposits were produced by geological data in Taebaeksan mineralized area, Korea. The methodological framework consists of three main steps: 1) identification of spatial relationships 2) quantification of such relationships and 3) combination of multiple quantified relationships. A spatial database containing 46 Au-Ag deposits was constructed using GIS. The spatial association between training deposits and 26 related factors were identified and quantified by probabilistic and statistical modelling. The mineral potential maps were generated by integrating all factors using the overlay method and recombined afterwards using the likelihood ratio model. They were verified by comparison with test mineral deposit locations. The verification revealed that the combined mineral potential map had the greatest accuracy (83.97%), whereas it was 72.24%, 65.85%, 72.23% and 71.02% for the likelihood ratio, weight of evidence, logistic regression and artificial neural network models, respectively. The mineral potential map can provide useful information for the mineral resource development.     

Cloud computing and virtualization within the regional climate model and evaluation system

The Regional Climate Model Evaluation System (RCMES) facilitates the rapid, flexible inclusion of NASA observations into climate model evaluations. RCMES provides two fundamental components. A database (RCMED) is a scalable point-oriented cloud database used to elastically store remote sensing observations and to make them available using a space time query interface. The analysis toolkit (RCMET) is a Python-based toolkit that can be delivered as a cloud virtual machine, or as an installer package deployed using Python Buildout to users in order to allow for temporal and spatial regridding, metrics calculation (RMSE, bias, PDFs, etc.) and end-user visualization. RCMET is available to users in an “offline”, lone scientist mode based on a virtual machine dynamically constructed with model outputs and observations to evaluate; or on an institution’s computational cluster seated close to the observations and model outputs. We have leveraged RCMES within the content of the Coordinated Regional Downscaling Experiment (CORDEX) project, working with the University of Cape Town and other institutions to compare the model output to NASA remote sensing data; in addition we are also working with the North American Regional Climate Change Assessment Program (NARCCAP). In this paper we explain the contribution of cloud computing to RCMES’s specifically describing studies of various cloud databases we evaluated for RCMED, and virtualization toolkits for RCMET, and their potential strengths in delivering user-created dynamic regional climate model evaluation virtual machines for our users.