Interannual variations of the planktonic ecosystem in the slope water and Kuroshio south of Japan in February in the years 1990–2002

To determine recent interannual variations in the planktonic ecosystem of the slope water south of Japan, an area between 1000 m isobath on the continental slope and assumable Kuroshio front, in reference to preceding reports on the Kuroshio, we examined interannual variations of physical factors, sea surface chlorophyll concentration (SSChl), size-fractioned copepod biomass and the abundance of Calanus sinicus, one of the dominant copepods in the region, in February from 1990 to 2002. In the slope water, SSChl concentration had generally shown a higher value than in the Kuroshio and increase of the SSChl in both areas started in February but lasted longer in the slope water. The regional distribution of copepod biomass and C. sinicus abundance was similar to that of phytoplankton in that they were distributed more densely in the slope water than in the Kuroshio, reflecting assumed higher nutrient supply. The interannual variation in sea surface temperature in the slope water was explained by the rise of air temperature in 1998, a strong El Niño year, and subsequent change in the Kuroshio path (1999–2001). The interannual variation of the planktonic community, i.e. sea surface chlorophyll concentration and copepod biomass, was attributed to the effects of those physical events through the direct effect of local temperature and/or variation in surface irradiance, except for a prominent increase of copepods in the slope water in 2000. The effect of interannual change in the vertical mixing, suggested in previous studies, was not apparent in February, when the primary production is not limited by nutrient concentration which would be more important in regulating biological production in later months.     

Environmental control of short-term variation in the plankton community of inner Tokyo Bay, Japan

Water temperature, salinity, nutrient concentrations and the composition of the plankton community were recorded at three stations in inner Tokyo Bay over a period of 328 days (from June 8, 1995 to April 30, 1996) with a nominal sampling frequency of once per day. Inspection of the results revealed that the data could be divided into two blocs as an aid to analysis: the period from June to October was characterized by the development of stratification of temperature and salinity (stratification period), and November to March was characterized by uniform temperature and salinity in the water column due to vertical mixing (mixing period). Oxygen-depleted water forms in the bottom layer during the stratification period, but vertical mixing of the water column, due to changing wind and rainfall conditions caused by passing weather fronts, results in the breakdown of the oxygen-depleted water mass. Nutrient loads are high in the surface water due to the freshwater supply, but occasional pulses of primary production cause a depletion of phosphate in the surface water, suggesting that the phosphorus becomes a limiting nutrient for phytoplankton growth in this period. Several short-term peaks of plankton abundance (blooms) occurred as responses to temporal changes in water quality from June to November, with consequent species succession. Significant fluctuations in the densities of the diatom Skeletonema costatum and several species of ciliates corresponded to the daily changes in the physical and chemical characteristics of the coastal environment. During the mixing period, when water temperature and solar radiation decreased, there were no short-term variations in water quality and although nutrient concentrations gradually increased from November to February, primary production remained low. This study shows that the short-term dynamics of the phytoplankton community are closely coupled to fluctuations in environmental forcing, and that the degree of coupling is stronger during periods when solar radiation is greater. The results provide a novel typological understanding of seasonal plankton dynamics in a shallow, eutrophicated marine embayment, and suggest how such systems may be treated in simulation modeling.     

(Au,Ag)Te2 Minerals from Epithermal Gold Deposits in Japan

Chemical composition and mode of occurrences of (Au, Ag)Te₂ minerals such as calaverite (AuTe₂), sylvanite (AuAgTe₄) and krennerite ((Au, Ag)Te₂) in epithermal gold telluride ores from Suzaki, Kawazu and Teine are examined. In the ores from Suzaki, (Au, Ag)Te₂ minerals occur in microbands of tellurides and fine quartz. The minerals in telluride bands change from krennerite, via calaverite‐native tellurium, to sylvanite, in the order of crystallization. A sample from Kawazu contains sylvanite and native tellurium with stutzite, hessite and tetradymite in the coarser gray quartz part. The Teine sample also contains sylvanite and native tellurium with barite and quartz. The peak patterns of XRD of calaverite, krennerite and sylvanite from Suzaki are almost identical to that of JCPDS 43–1472, JCPDS 8–20 and JCPDS 9–477, respectively. The Te, Au, Cu, and Ag contents of calaverite from Suzaki range from 56.4 to 57.9 wt.%, from 41.6 to 42.6 wt.%, from 0.28 to 0.45 wt.% and from 0.14 to 0.31 wt.%, respectively, corresponding to the formula Au_0.97Ag_0.01Cu_0.02Te₂. The Te, Au, Ag, and Cu contents of krennerite from Suzaki range from 59.6 to 61.4 wt.%, from 31.3 to 33.6 wt.%, from 4.91 to 6.13 wt.% and from 0.66 to 0.80 wt.%, respectively, corresponding to the formula Au_0.71Ag_0.22Cu_0.05Te₂ with Au and Ag ranging from 0.68 to 0.74 and from 0.20 to 0.25, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Suzaki range from 61.5 to 63.4 wt.%, from 24.1 to 27.4 wt.%, from 10.0 to 12.5 wt.% and from 0.00 to 0.12 wt.%, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Kawazu range from 62.7 to 63.3 wt.%, from 23.5 to 24.1 wt.%, from 12.0 to 12.5 wt.% and from 0.09 to 0.16 wt.%, respectively. The Te, Au, Ag, Cu and Fe contents of sylvanite from Teine range from 61.8 to 63.5 wt.%, from 23.6 to 24.7 wt.%, from 11.9 to 13.3 wt.%, from 0.01 to 1.65 wt.% and from 0.00 to 0.02 wt.%, respectively. The average formulae of sylvanite from Suzaki, Kawazu, and Teine are expressed as Au_1.06Ag_0.94Cu_0.02Te₄, Au_1.00Ag_0.95Cu_0.02Te₄ and Au_1.01Ag_0.95Cu_0.06Te₄, respectively. Judging from the mineral assemblages of these ores and other localities, Au–Te mineralization in the Japanese Islands can be divided into four types: native gold–calaverite at Date and Agawa, krennerite(?native tellurium) at Osore‐zan and Mutsu, sylvanite–native tellurium–hessite at Teine, Kawazu, Kobetsuzawa, and Kato, and polyminerallic assemblages at Suzaki and Kushikino. The pH–Eh diagram of aqueous tellurium species and tellurium minerals at 250°C indicates that (Au, Ag)Te₂ minerals in epithermal gold telluride mineralization would have been formed under middle to low Eh and acidic (to intermediate) pH conditions. It is possible that dilute tellurium‐containing fluid would scavenge dilute gold.     

Abundance of nauplii and protein synthesis activity of adult female copepods in the Kuroshio front during the Japanese sardine spawning season

In order to point out the potential importance of the Kuroshio front as a feeding ground for the early post larvae of the Japanese sardine, distributions of copepod nauplii—the principal food for the larvae—were investigated.Nauplii were abundant in and near the front and in a warm water mass off Ensyu-nada, where the concentration of chlorophylla was high. Adult females ofParacalanus sp. were dominant in the copepod group there, and the protein synthesis activity shown by the RNA/DNA ratio was high. It is expected that copepod egg productivity is enhanced in the area where food phytoplankton is abundant, because the RNA/DNA ratio showed a positive correlation to chlorophylla in situ.In and near the front, high chlorophylla concentration—which is probably supported by nutrient supply caused by local upwelling and/or eddies at the front—contributes to the high RNA/DNA ratio of the copepods. The relatively large biomass of copepod nauplii at the front may be supported by female's high egg productivity. It is supposed, as a result, that food availability for the early post larvae of the Japanese sardine is increased in and near the Kuroshio front.     

Impacts of vehicles on natural terrain at seven sites in the San Francisco Bay area

The impacts of off-road vehicles on vegetation and soil were investigated at seven representative sites in the San Francisco Bay area. Plant cover of grass and chaparral (with shrubs to 4 m tall) have been stripped by the two- and four-wheel vehicles in use. Impacts on loamy soils include increased surface strength (as much as 275 bars), increased bulk density (averaging 18%) to depths of 90 cm or more, reduction of soil moisture by an average 43% to 30 cm depths, greatly reduced infiltration, extension of the diurnal temperature range by as much as 12°C, and reduction of organic carbon by an average 33% in exposed soils. Very sandy soils respond similarly to vehicular use except that moisture is increased and surface strength of beach sand is decreased. These physical and chemical impacts reduce the land's capability of restoring its vegetative cover, which in turn adversely affects animal populations. Both the loss of plant cover and the physical changes caused by vehicles promote erosion. Measured soil and substrate losses from vehicular use zones range from 7 to 1180 kg/m². The estimated erosion rate of the Chabot Park site exceeds the rate of erosion considered a serious problem by a factor 30, it exceeds United States Soil Conservation Service tolerance values by a factor of 46, and it exceeds average San Francisco Bay area erosion rates by a factor of 17. The resulting soil losses are effectively permanent. Neither the increased sediment yield nor the increased runoff is accomodated on the sites of use, and both are causing adverse effects to neighboring properties.     

Substructure shake table test method using a controlled mass: formulation and numerical simulation

This study proposes a new substructure shake table test method that allows for experimental investigation of the lower portion of structures while the upper part is numerically analyzed. Compatibility conditions are derived to ensure that the dynamic characteristics of the substructured system are equivalent to the reference entire structure. This method utilizes controlled masses to incorporate interface forces from the computational substructure to the experimental substructure. A feasible implementation procedure for the interface force compatibility is developed using a series of conversions and signal processing. For validation of the capabilities and limitations of the proposed substructure method, numerical simulations are performed using detailed models including dynamics of the controlled mass systems. Results from the numerical simulations showed that the proposed substructure method produced comparable results to the reference entire simulations. The average error between top floor displacements produced by substructured and entire responses for earthquake inputs was 7.1%. Numerical studies showed that the substructure method has potential to serve as an alternative to shaking table tests of entire structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Experimental implementation and verification of multi‐degrees‐of‐freedom effective force testing

This paper presents an experimental implementation and verification of multi‐degrees‐of‐freedom effective force testing (MDOF‐EFT). An experimental setup that consists of a two‐degrees‐of‐freedom structural system and two hydraulic actuators at the Johns Hopkins University was utilized in this study. First, experimental system identification was performed to develop compatible analytical models for the multi‐input and multi‐output systems. Dynamics of the control plant, that is, the valve‐to‐force relations, were modeled with a rational polynomial transfer function matrix and delay components. By using the analytical model, a centralized decoupling loop‐shaping force feedback controller was designed such that the forces are uncoupled and the loop transfer functions have desirable dynamic characteristics in the frequency domain. Then, a series of harmonic force and earthquake simulation tests were performed to assess capabilities and limitations of MDOF‐EFT. Experimental results showed that the dynamic forces in the two actuators were accurately controlled to provide tracking while the system was stable and robust for the entire period of the experiment. Furthermore, earthquake simulation tests with increased levels of the reference forces demonstrated the feasibility of MDOF‐EFT with highly nonlinear test structures. Copyright © 2013 John Wiley & Sons, Ltd.     

Mechanical response of the south flank of kilauea volcano, hawaii, to intrusive events along the rift systems

Increased earthquake activity and compression of the south flank of Kilauea volcano, Hawaii, have been recognized by previous investigators to accompany rift intrusions. We further detail the temporal and spatial changes in earthquake rates and ground strain along the south flank induced by six major rift intrusions which occurred between December 1971 and January 1981. The seismic response of the south flank to individual rift intrusions is immediate; the increased rate of earthquake activity lasts from 1 to 4 weeks. Horizontal strain measurements indicate that compression of the south flank usually accompanies rift intrusions and eruptions. Emplacement of an intrusion at a depth greater than about 4 km, such as the June 1982 southwest rift intrusion, however, results in a slight extension of the subaerial portion of the south flank.Horizontal strain measurements along the south flank are used to locate the January 1983 east-rift intrusion, which resulted in eruptive activity. The intrusion is modeled as a vertical rectangular sheet with constant displacement perpendicular to the plane of the sheet. This model suggests that the intrusive body that compressed the south flank in January 1983 extended from the surface to about 2.4 km depth, and was aligned along a strike of N66°E. The intrusion is approximately 11 km in length, extended beyond the January 1983 eruptive fissures, which are 8 km in length and is contained within the 14-km-long region of shallow rift earthquakes.