The Filament Disappearance of 7 May 1992 (the Ebi)

The 7 May 1992 filament disappearance in the low corona is analyzed. The cool and hot components of this event are studied, using H, soft X-ray and radio data. We first show the general effect of the disparition brusque (DB) on the life of the filament, which was a quiescent filament in the vicinity of an active region, and then give the history of the development of the 7 May event. The main stages of the event are: (i) the formation of hot arches spanning the cool filament; (ii) rise of the filament, with plasma ejection into the corona, in which we note some spreading of loops from the main body, with two distinct rising velocity phases of the H filament; (iii) formation of X-ray arches below the filament, the foot points of the arcades being two-ribbon H flare patches. The dynamics of H and X-rays features are given.     

Hydrous and anhydrous alterations of chondrules in Kaba and Mokoia CV chondrites

Abstract— Chondrules in the Bali-like CV chondrite Kaba and the Allende-like portion of the Mokoia breccia have been studied to explore the relationship between hydrous alteration to form phyllosilicates and anhydrous alteration resulting in secondary olivine zonation, replacement of enstatite by ferroan olivine and formation of feldspathoids (nepheline and sodalite). All Kaba chondrules experienced extensive hydrous alteration; whereas, anhydrous alteration was minor and resulted only in the olivine zonation. On the other hand, all of the Mokoia chondrules experienced both extensive anhydrous and hydrous alteration. Bronzite rims formed between relic enstatite grains and phyllosilicates in both Kaba and Mokoia during the hydrous alteration. Petrographic observations indicate that phyllosilicates in Mokoia postdate formation of the secondary ferroan olivine and feldspathoids. We conclude that anhydrous alteration in Kaba and Mokoia predated hydrous alteration and took place before accretion of chondrules into the CV parent asteroid.     

Martian basalt (shergottite) Queen Alexandra Range 94201 and lunar basalt 15555: A tale of two pyroxenes

Abstract— We present here ion microprobe analyses of rare earth and other selected trace and minor elements in pyroxenes of shergottite Queen Alexandra Range 94201 and lunar basalt 15555. Pyroxene zonation patterns record the crystallization histories of these two basaltic samples from Mars and the Moon, respectively, and allow a comparison of mafic melt evolution on these two planetary bodies. Elemental abundances and trends in pyroxenes of these two rocks indicate that their minerals formed by continuous, closed system fractional crystallization of their respective parent melts. This further supports the idea that QUE 94201 closely represents the composition of a true Martian basaltic melt (McSween et al., 1996). The main differences in pyroxene elemental zonation patterns in these two objects are attributed to earlier crystallization of whitlockite in QUE 94201 (i.e., before the Fe-rich pyroxenes) than in 15555 (after the Fe-rich pyroxenes). The size of Eu anomalies in pyroxenes of QUE 94201 is intermediate between that in pyroxenes of 15555 and the other shergottites and may imply that fO₂ conditions during crystallization of this Martian basalt were significantly more reducing than for other shergottites, although not quite as reducing as for lunar basalts. Cerium anomalies appear to be less prevalent in pyroxenes of QUE 94201 than other Antarctic shergottites and could be indicative of lesser degree of weathering in the Antarctic.     

High-resolution bispectrum speckle interferometry and two-dimensional radiative transfer modeling of the Red Rectangle

We present the first diffraction-limited K-band image of the Red Rectangle with 76 mas resolution, an H-band image with 75 mas resolution, and an RG 715 filter image ( 800 nm wavelength) with 78 mas resolution (corresponding to 25 AU for a distance of 330 pc). The H and K images were reconstructed from 6 m telescope speckle data and the RG 715 image from 2.2 m telescope data using the speckle masking bispectrum method. At all wavelengths the images show a compact, highly symmetric bipolar nebula, suggesting a toroidal density distribution of the circumstellar material. No direct light from the central binary can be seen as it is obscured by a dust disk or circumbinary torus. Our first high-resolution H−K color image of the nebula shows a broad red plateau of H−K≈ 2^m in the bright inner regions.The optical and near-infrared images and the available photometric continuum observations in a wide range of ultraviolet to centimeter wavelengths enabled us to model the Red Rectangle in detail using a two-dimensional radiative transfer code. Our model matches both the high-resolution images and the spectral energy distribution of this object very well, making the following picture much more certain. The central close binary system with a total luminosity of 3000 L is embedded in a very dense, compact circumbinary torus which has an average number density n_H ≈5×10¹² cm⁻³, an outer radius of the dense inner region of R≈30 AU (91 mas), and a ρ∝r⁻² density distribution. The full opening angle of the bipolar outflow cavities in our model is 70°. By comparing the observed and theoretical images, we derived an inclination angle of the torus to the line of sight of 7°±1°.The radiative transfer calculations show that the dust properties in the Red Rectangle are spatially inhomogeneous. The modeling confirms that the idea of large grains in the long-lived disk around the Red Rectangle (Jura et al., 1997 [ApJ, 474, 741]) is quantitatively consistent with the observations. In our models, unusually large, approximately millimeter-sized grains dominate the emission of the compact, massive torus. Models with smaller average grain sizes can possibly be found in future studies, for instance, if it turns out that the radio spectrum is not mainly caused by continuum dust emission. Therefore, the large grains suggested by our models require further confirmation by both new observations and radiative transfer calculations. Assuming a dust-to-gas ratio ρ_d/ρ_g of 0.005, the dense torus mass is 0.25 M. The model gives a lower limit of 0.0018 M, for the mass of the large particles, which produce a gray extinction of A≈ 28^m, towards the center. A much smaller mass of submicron-sized dust grains is presumably located in the polar outflow cavities, their conical surface layers, and in the outer low-density parts of the torus (where ρ∝r⁻⁴, in the region of 30 AUr 2000 AU corresponding to 0.^′′09–6^′′).     

Sapphirine-bearing granulites and related high-temperature metamorphic rocks from the Higo metamorphic terrane, west-central Kyushu, Japan

The Higo metamorphic unit in west-central Kyushu island, southwest Japan is an imbricated crustal section in which a sequence of units with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The basal part of the metamorphic sequence representing an original depth of 23–24  km consists mainly of garnet–cordierite–biotite gneiss, garnet–orthopyroxene gneiss, orthopyroxene-bearing amphibolite and orthopyroxene-bearing S-type tonalite. These metamorphic rocks underwent high amphibolite-facies up to granulite facies metamorphism with peak P – T  conditions of 720  MPa, 870  °C. In addition sapphirine-bearing granulites and related high-temperature metamorphic rocks also occur as tectonic blocks in a metamorphosed peridotite intrusion. The sapphirine-bearing granulites and their related high-temperature metamorphic rocks can be subdivided into five types of mineral assemblages reflecting their bulk chemical compositions as follows: (1) sapphirine–corundum–spinel–cordierite (2) corundum–spinel–cordierite (3) garnet–corundum–spinel–cordierite (4) garnet–spinel–gedrite–corundum, and (5) orthopyroxene–spinel–gedrite. These metamorphic rocks are characterized by unusually high Al₂O₃ and low SiO₂ contents, which could represent a restitic nature remaining after partial melting of pelitic granulite under the ultra high-temperature contact metamorphism at the peak metamorphic event of the Higo metamorphic unit. The metamorphic conditions are estimated to be about 800  MPa and above 950  °C which took place at about 250  Ma as a result of the thermal effect of the regional gabbroic rock intrusions.     

The electrification of flowing gases by mechanical abrasion of mineral surfaces

In the past, a number of workers have shown that both charged and neutral particles are released from inorganic materials during fracture and abrasion. In this work we show that charge can be transported by electrification of flowing gases over a surface undergoing abrasion. These results are relevant to possible mechanisms of a number of observed electrical phenomena associated with fault motion and earthquake activity. Received: 14 July 1997 / Revised, accepted: 2 January 1998     

Migration and dispersion of trace elements in the rock–soil–plant system in areas underlain by black shales and slates of the Okchon Zone, Korea

The Okchon black shale in Korea provides a typical example of natural geological materials enriched with potentially toxic elements. The Chung-Joo, Duk-Pyung, Geum-Kwan, I-Won, Bo-Eun and Chu-Bu areas are underlain by these black shales and slates of the Guryongsan Formation or the Changri Formation, which are parts of the Okchon Group in the central part of the southern Korean Peninsula. In order to investigate the enrichment levels and dispersion patterns of potentially toxic elements in the rock–soil–plant system, environmental geochemical surveys were undertaken in the above six study areas in the Okchon Zone. After appropriate preparation, rock and soil samples were analyzed for potentially toxic elements by instrumental neutron activation analysis (INAA) and inductively coupled plasma atomic emission spectrometry (ICP-AES), and plant samples by atomic absorption spectrometry (AAS). In particular, Ba, Cd, Mo, V and U in Okchon black shales are highly enriched, and their mean concentrations are significantly higher than those in black slates. These elements are geochemically associated, and might be enriched simultaneously. The highest mean concentrations of 42.0 μg g⁻¹ As, 2100 μg g⁻¹ Ba, 10.9 μg g⁻¹ Cd, 213 μg g⁻¹ Mo, 83 μg g⁻¹ U, 938 μg g⁻¹ V and 394 μg g⁻¹ Zn are found in black shales from the Duk-Pyung area. Mean concentrations of As, Mo and U in soils overlying black shales occurring in the Duk-Pyung area (30 μg g⁻¹ As, 24 μg g⁻¹ Mo and 50 μg g⁻¹ U) and Chu-Bu area (39 μg g⁻¹ As, 15 μg g⁻¹ Mo and 27 μg g⁻¹ U) are higher than the permissible level. Enrichment index values of the six study areas decrease in the order of Duk-Pyung > Chu-Bu > Bo-Eun > Chung-Joo > Geum-Kwan = I-Won areas. Relationships between trace element concentrations in soils and plants are significantly correlated, and the biological absorption coefficients (BAC) in plants are in the order of Cd > Zn = Cu > Pb, which suggests that Cd is more bioavailable to plants than the other elements. Cadmium concentrations in plant species decrease in the order of chinese cabbage > red pepper > soybean = sesame > rice stalk > corn > rice grain. From the result of sequential extraction analysis of soils, relatively high proportions of Cu, Pb and Zn are present as residual fractions, and that of Cd as non-residual fractions. Cadmium occurs predominantly as exchangeable/water-acid soluble phase in soils, and this is in agreement with the findings of high Cd concentrations in plants.     

Quantitative Assessment of Extrinsic Damage in Rock Materials

Summary   Comminution (crushing and grinding) of rock materials is energy-intensive and expensive. Much effort has been directed to improve the efficiency of conventional milling practice, but relatively little attention has been given to the potential benefits of blast-induced (extrinsic) damage on comminution processes. The objective of this research is to investigate the effect of shock-induced “crack-like” damage on rock properties for three petrologically distinct rock materials under laboratory conditions. In order to evaluate the effect of shock-induced damage, a quantitative measure of rock damage is needed. Shock loading of rock material was accomplished with an explosively driven split Hopkinson pressure bar. Laboratory measurements show that the average uniaxial compressive strengths for damaged specimens are slightly lower than those for intact specimens. Based on damage mechanics, the scalar damage variable () was experimentally determined as the relative reduction in ultrasonic wave velocity of damaged versus intact rock. increases as the shock energy dissipated in rock material increases. A crack density was determined by confocal image analysis. Measurements following shock loading indicate that ultrasonic wave velocity in rock partially recovers with time. Ultrasonic wave velocity and confocal image analysis may be useful in quantitatively assessing the internal crack-like damage in rock materials.     

A classification system for the assessment of slope stability of terrains along highway routes in Jordan

 The establishment of comprehensive development plans, in general, and the proper selection of highway routes, in particular, require an assessment of landslides or instability hazards in the project sites. The frequent landslides that occurred along the routes of major highways in Jordan, and particularly along the Amman-Na'ur-Dead Sea highway and Irbid-Jerash-Amman highway, have substantially increased the cost of construction and caused a considerable delay in the completion of work. The study of many landslides that occurred in the last 25 years along the highway routes and in the sites of some major civil engineering projects in Jordan has led to the recognition of major factors that affect the stability of slopes, and thus the safety and economics of these projects. The geological formation, structural features, topographic characteristics, geometry, and climatic conditions were adopted as the basis for the classification of terrains in terms of their stability. Each factor has been assigned a rating to indicate its relative contribution to the overall stability according to engineering judgment and past experience. The areas have been classified into 5 groups according to their total stability rate. The simplicity, comprehensiveness, and accuracy are the main characteristics of the proposed classification. Its significance stems from its helpfulness as a guide to the geotechnical and highway engineers in assessing the overall stability of the alternative routes of proposed highway projects. Received: 3 December 1996 · Accepted: 29 April 1997