Geostatistical integration using 2-D electrical resistivity and 3-D gravity methods for detecting cavities in a karst area

Two-dimensional (2-D) electrical resistivity and three-dimensional (3-D) gravity explorations were undertaken to estimate the 3-D distribution of karst cavities at the area of Yongweol-ri in Korea where ground subsidence has occurred. Although the gravity method is a low-cost way of analyzing a 3-D continuous structure, its vertical resolving power is poor. In contrast, the electrical resistivity method can provide a 2-D and/or 3-D subsurface structure with a much higher lateral and vertical resolution than the gravity method. Accordingly, geostatistical methods and density information were used to enhance the 2-D resistivity structure revealed by the electrical resistivity method into a 3-D structure. The assumptions are, first, that each data set senses the same underlying geological structure in terms of different material properties and, secondly, that two different material properties are correlated locally or globally throughout the entire target area. As a result, the distribution of limestone cavities can be estimated under the assumption that they are mostly filled with groundwater and clayey soils and have abnormally low levels of resistivity and density. The estimated distribution corresponds with the grouting, borehole imaging and monitoring data. In this example, it can be seen that the integration analysis of 2-D electrical resistivity and 3-D gravity methods is a very powerful tool for 3-D subsurface imaging and that the method can provide enhanced imaging capabilities for 3-D cavities.     

Analytical and Numerical Modeling of Solute Intrusion,Recovery, and Rebound in Fractured Bedrock

Contaminated groundwater in fractured bedrock can expose ecosystems to undesired levels of risk for extended periods due to prolonged back-diffusion from rock matrix to permeable fractures. Therefore, it is key to characterize the diffusive mass loading (intrusion) of contaminants into the rock matrix for successful management of contaminated bedrock sites. Even the most detailed site characterization techniques often fail to delineate contamination in rock matrix. This study presents a set of analytical solutions to estimate diffusive mass intrusion into matrix blocks, it is recovered by pumping and concentration rebound when pumping ceases. The analytical models were validated by comparing the results with (1) numerical model results using the same model parameters and (2) observed chloride mass recovery, rebound concentration, and concentration in pumped groundwater at a highly fractured bedrock site in Alberta, Canada. It is also demonstrated that the analytical solutions can be used to estimate the total mass stored in the fractured bedrock prior to any remediation thereby providing insights into site contamination history. The predictive results of the analytical models clearly show that successful remediation by pumping depends largely on diffusive intrusion period. The results of initial mass from the analytical model was used to successfully calibrate a three-dimensional discrete fracture network numerical model further highlighting the utility of the simple analytical solutions in supplementing the more detailed site numerical modeling. Overall, the study shows the utility of simple analytical methods to support long-term management of a contaminated fractured bedrock site including site investigations and complex numerical modeling.     

TBT toxicity on the marine microalga Nannochloropsis oculata

Commercial antifouling formulations containing TBT are the major source of organotin contamination in coastal waters. In view of the persisting TBT residues (13 ng Sn l⁻¹) in the coastal waters of South Korea, an attempt has been made to evaluate the growth response and biochemical composition of laboratory-cultured Nannochloropsis oculata to TBT toxicity. It is evident that the persisting concentration level of TBT is high enough to cause adverse effect on the microalgal species. The EC₅₀ (24 h) was found to be at 0.89 nM level of TBT for this marine eustigmatophyte N. oculata. Photosynthetic pigment content was significantly affected. At elevated TBT concentrations of 1.0 nM, especially pronounced changes in biochemical composition was found. TBT tolerance of N. oculata and its growth as well as biochemical responses are discussed.     

Characterization of spatial and temporal variation of suspended sediments in the Yellow and East China Seas using satellite ocean color data

Total suspended sediment (TSS) data concentrations are retrieved from two sets of satellite ocean color data (the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard Aqua and the Korean Geostationary Ocean Color Imager (GOCI)) using an existing regional model to characterize spatial and temporal variation of TSS in the Yellow and East China Seas. MODIS-derived TSS maps show that TSS concentrations are, in general, high along the Korean and Chinese coasts including the Bohai Sea and the Yangtz River estuary, and lower in the middle of the Yellow Sea and the southeastern area of the East China Sea. The monthly average of 10-year MODIS data reveals that TSS values are highest during winter (January to February) and lowest in summer (July to August). Short-term TSS concentrations retrieved from GOCI data showed the dominant influence of semi-diurnal tidal changes on sediment dynamics through temporal (hourly) and spatial distribution in coastal zones of the Yellow sea. The results presented here demonstrate that the satellite-derived TSS products can be utilized as an application tool for future studies on long- and short-term sediment dynamics of turbid coastal waters. In particular, GOCI observations provide unique important capabilities to characterize and quantify the water properties at high temporal (hourly) and spatial (0.5 km) resolutions in the turbid coastal waters of the Yellow Sea and its vicinities.     

An optimal determination of variable antenna height and power for in-orbit SAR operations

An optimal power and antenna height determination over a wide range of incidence angles is proposed for in-orbit operations of the spaceborne stripmap synthetic aperture radar (SAR) with variable antenna height and variable radiating element power. The antenna height and the average transmitted radio-frequency power of a radiating element for each incidence angle are determined so that the mapping area can be maximized with the constraints on the signal-to-noise ratio, ambiguities, and swath width, given the SAR geometry (an altitude and incidence angles) and radar wavelength. With the receive-chain power consumption of one transmit/receive module (P/sub r/=10 mW) and the SAR instrument power consumption without the phased array antenna (P/sub I/=5 W), the illustrative design example shows that the mapping area of the proposed SAR for the maximum incidence angle (/spl eta//sup max/=75/spl deg/) is about 269.1% of that resulted from utilizing only the variable antenna height. The proposed optimization would have a more beneficial effect on applications that need the high-incidence-angle operations.     

Gondwana-Derived Terranes Structural Mapping Using PALSAR Remote Sensing Data

Gondwana-derived terranes are now separated by major faults or suture zone, which are rarely simple and easily recognizable lineaments. Different association of ore mineral systems such as deposits of sediment-hosted/orogenic gold and granite-related minerals is discovered in collision and subduction zones of the Gondwana-derived terranes. They are associated with large-scale, terrane-bounding fault systems and broad areas of deformation. Mineralization mostly associated with structurally-controlled complex lodes, veins, sheeted veins and veinlets in diverse orientations. Recognizing the structural significance of lineaments and curvilinear is very difficult in tropical, arid and Antarctic regions due to environmental obstacles. Remote sensing data could be used to detect geological structures associated with suture zones between Gondwana-derived terranes especially for large inaccessible regions where fieldwork is limited or nonexistent. In this investigation, the Phased Array type L-band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in the Bentong-Raub Suture Zone of Peninsular Malaysia. It is one of the major structural zones in Sundaland, Southeast Asia, which forms the boundary between the Gondwana-derived the Sibumasu terrane and Sukhothai-Indochina arc. Structural features associated with sediment-hosted/orogenic gold deposits in the Central Gold Belt and tin mineralization in S-type granites in the Main Range were investigated using PALSAR data and comprehensive fieldwork. Results indicate that main faults strike along 340° to 350° that are intersected by many shear or lateral fault zones are high potential zone for gold mineralization in the Central Gold Belt. Hydrothermally alteration mineral zones and cataclastic rocks are also the other indicators of gold mineralized veins in the gold belt. High potential zones for tin mineralization are N–S strike-slip faults, fault zones and shear zones trending E–W, NE–SW and WNW–ESE in dissected crystalline granitic rocks that are associated with hydrothermal alteration zones in the Western Tin Belt. Lineament analysis using PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detection of the boundary between the Gondwana-derived terranes and detailed structural analysis of fault systems and deformation with high potential for a variety of mineral resources, especially in tropical, arid and Antarctic regions.     

A GNSS interference identification using an adaptive cascading IIR notch filter

A low-complexity time-domain approach for global navigation satellite systems is proposed to detect and identify single-tone, multi-tone, swept continuous wave interference (CWI) and band-limited white Gaussian noise (BLWN). An adaptive notch filter and adaptive cascading filter structure are employed to identify the type of interference signals. The number of the cascading stages is selected by comparing the total power in receiver bandpass, and after, passing the adaptive notch filter. For this reason, the proposed filter structure is more efficient in identifying and mitigating interference signals than the conventional filter structure. In addition, the automatic gain control gain is used to detect the existence of continuous wave interference. The performance of the interference detection and identification method is evaluated for the cases of GPS signal in the presence of single-tone, multi-tone, swept CWI and BLWN.     

A comparison of network model creation algorithms based on the quality of wayfinding results

Various network model creation algorithms have been introduced to demonstrate a better approximation of the actual walking pattern and to provide a better wayfinding guide. However, it is under‐investigated which algorithm creates the most appropriate indoor navigation network model in the context of wayfinding applications. Due to the lack of discussion, some studies unconsciously extended an algorithm designed for creating an outdoor navigation network model to indoor space applications. This is problematic because indoor space has different spatial contexts from outdoor space, such as non‐linear space and no‐designated walking space. Our solution is to select five well‐known algorithms that have been introduced, to reproduce the algorithm for the automated construction of the indoor navigation network model, and to evaluate the applicability of algorithms for indoor wayfinding applications. This article compares the quality of wayfinding results from the output of the indoor navigation network model against two criteria: route efficiency (i.e., length) and route simplicity (i.e., number of directions). Our statistical analysis illustrates that the visibility graph algorithm is the most appropriate for indoor wayfinding applications.     

The Kyonggi Shear Zone of the Central Korean Peninsula: Late Orogenic Imprint of the North and South China Collision

The crustal-scale Kyonggi shear zone of central Korea has been identified as a major boundary between the Precambrian Kyonggi massif in the south and the Imjingang belt in the north. The latter is an eastward extension of the Qinling-Dabie-Sulu collisional belt of China. Field observations and microstructural analysis indicate that the extensional shear zone evolved from a deep crustal ductile regime to a shallow crustal brittle regime, associated with a rapid uplift of the Kyonggi massif following the Late Permian-Early Triassic collision between the Sino-Korean and Yangtze cratons. A Rb-Sr muscovite age (226+/-1.2 Ma) of the mylonite suggests that the extensional ductile shearing occurred during the Late Triassic.     

A case study for the integration of predictive mineral potential maps

This study aims to elaborate on the mineral potential maps using various models and verify the accuracy for the epithermal gold (Au) — silver (Ag) deposits in a Geographic Information System (GIS) environment assuming that all deposits shared a common genesis. The maps of potential Au and Ag deposits were produced by geological data in Taebaeksan mineralized area, Korea. The methodological framework consists of three main steps: 1) identification of spatial relationships 2) quantification of such relationships and 3) combination of multiple quantified relationships. A spatial database containing 46 Au-Ag deposits was constructed using GIS. The spatial association between training deposits and 26 related factors were identified and quantified by probabilistic and statistical modelling. The mineral potential maps were generated by integrating all factors using the overlay method and recombined afterwards using the likelihood ratio model. They were verified by comparison with test mineral deposit locations. The verification revealed that the combined mineral potential map had the greatest accuracy (83.97%), whereas it was 72.24%, 65.85%, 72.23% and 71.02% for the likelihood ratio, weight of evidence, logistic regression and artificial neural network models, respectively. The mineral potential map can provide useful information for the mineral resource development.