Landslide susceptibility mapping of the Sera River Basin using logistic regression model

Of the natural hazards in Turkey, landslides are the second most devastating in terms of socio-economic losses, with the majority of landslides occurring in the Eastern Black Sea Region. The aim of this study is to use a statistical approach to carry out a landslide susceptibility assessment in one area at great risk from landslides: the Sera River Basin located in the Eastern Black Sea Region. This paper applies a multivariate statistical approach in the form of a logistics regression model to explore the probability distribution of future landslides in the region. The model attempts to find the best fitting function to describe the relationship between the dependent variable, here the presence or absence of landslides in a region and a set of independent parameters contributing to the occurrence of landslides. The dependent variable (0 for the absence of landslides and 1 for the presence of landslides) was generated using landslide data retrieved from an existing database and expert opinion. The database has information on a few landslides in the region, but is not extensive or complete, and thus unlike those normally used for research. Slope, angle, relief, the natural drainage network (including distance to rivers and the watershed index) and lithology were used as independent parameters in this study. The effect of each parameter was assessed using the corresponding coefficient in the logistic regression function. The results showed that the natural drainage network plays a significant role in determining landslide occurrence and distribution. Landslide susceptibility was evaluated using a predicted map of probability. Zones with high and medium susceptibility to landslides make up 38.8 % of the study area and are located mostly south of the Sera River Basin and along streams.     

Adsorption Kinetics of Chloroform from Aqueous Solutions onto Activated Lignite

The lignite coal researched by this study was subjected to a two‐stage activation process performed in the scope of obtaining active carbon from domestic resources. “Activation” and “carbonization” stages were used in the experiments. The modified lignite was produced by impregnating lignite with KOH and washing the activation product with 15% HCl solution after thermal treatment. Increasing KOH dosage also increased the removal efficiency. The variables investigated in adsorption experiments were contact time, initial concentration, pH, and sorbent dosage. Adsorption kinetics was fitted by using the pseudo‐first‐order equation, pseudo‐second‐order equation, and intra‐particle diffusion. Isotherm modeling was carried out using Langmuir, Freundlich, and Dubinin–Radushkevich equations. Selected target compound in this work is common environmental pollutant in waters. A commonly known effect of chloroform is its carcinogenic effect. Therefore, removal of these compounds from water is considerably important. Chloroform removal of 97% for was achieved by the use of Konya region activated lignite.     

Removal of Organochlorine Pesticides from Aqueous Solution by Using Neutralized Red Mud

This work describes the potential usability of neutralized red mud for the removal of organochlorine pesticides (OCPs) from aqueous solutions. After examination on the adsorption capability of neutralized red mud for all studied OCPs, the experiments were performed by employing aldrin as a model compound. The effect of several parameters, such as contact time, pH of the solution, initial aldrin concentration, and dosage of the adsorbent was evaluated by batch experiments. The determination of OCPs was carried out using traditional liquid–liquid extraction followed by a GC coupled with µ‐electron capture detector (GC‐µECD). The results showed that adsorption equilibrium time depended upon the initial aldrin concentration and adsorption followed the second‐order kinetic model. Kinetic study also indicated that the film diffusion mechanism was a main rate control mechanism. The removal was explained by considering the electrostatic interactions between metal oxides surface of the neutralized red mud and inductively charged centers (negative charge (d?) of chlorine atoms and positive charge (d+) of π‐cloud aromatic ring) of the aldrin molecules. In comparison to the Langmuir isotherm model, the Freundlich model better represented the adsorption data. The neutralized red mud was also succesfully employed for the removal of OCPs from real water samples, including tap water and surface (lake) water, fortified with studied OCPs.     

Acigöl rhyolite field,central Anatolia (part II): geochemical and isotopic (Sr–Nd–Pb, δ<Superscript>18</Superscript>O) constraints on volcanism involving two high-silica rhyolite suites

The Acigöl rhyolite field erupted the most recent high-silica rhyolites within the Cappadocian Volcanic Province of central Anatolia, Turkey. It comprises two sequences of domes and pyroclastic rocks with eruption ages of ~150–200 ka (eastern group) and ~20–25 ka (western group). Compositionally, the eastern rhyolite group lavas are less evolved (SiO₂ = 74–76 wt%), whereas the western group has higher silica abundance (SiO₂ = ~77 wt%) with extremely depleted feldspar-compatible trace elements. Within each group, compositional variability is small and ¹⁴³Nd/¹⁴⁴Nd (0.51257–0.51265) and Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.87–18.88, ²⁰⁷Pb/²⁰⁴Pb = 15.65–15.67 and ²⁰⁸Pb/²⁰⁴Pb = 38.94–38.98) are homogeneous. The western group rhyolites have δ¹⁸O(zircon) overlapping mantle values (5.7 ± 0.2‰), whereas eastern group rhyolites are enriched in δ¹⁸O by ~0.5‰, consistent with a tendency to lower εNd values. By contrast, western group rhyolites have markedly more radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7065–0.7091) compared to those of the eastern group (0.7059–0.7065). The presence of angular granitic xenoliths and a correlation between hydration (based on loss on ignition data) and ⁸⁷Sr/⁸⁶Sr in the western lavas, however, indicates that Sr was added during the eruption or post-eruption alteration. Isotope constraints preclude the possibility that the rhyolite magmas formed by partial melting of any known regional crystalline basement rocks. Basalts and andesites erupted in the periphery of the Acigöl field are characterised by ⁸⁷Sr/⁸⁶Sr ratios between 0.7040 and 0.7053, ¹⁴³Nd/¹⁴⁴Nd = 0.51259–0.51300, ²⁰⁶Pb/²⁰⁴Pb = 18.85–18.87, ²⁰⁷Pb/²⁰⁴Pb = 15.646–15.655, ²⁰⁸Pb/²⁰⁴Pb = 38.90–38.97. The isotopic and trace element data favour an origin of the rhyolites by mixing of basaltic/andesitic magmas with minor amounts of crustal melts and followed by extensive fractional crystallization.     

Prediction of the Cut Depth of Granitic Rocks Machined by Abrasive Waterjet (AWJ)

In this paper, an experimental study on the cut depth, which is an important cutting performance indicator in the abrasive waterjet (AWJ) cutting of rock, was presented. Taguchi experimental design of an orthogonal array was employed to conduct the experiments. A variety of nine types of granitic rocks were used in the cutting experiments. The experimental data were used to assess the influence of AWJ operating variables on the cut depth. Using regression analysis, models for prediction of the cut depth from the operating variables and rock properties in AWJ machining of granitic rocks were then developed and verified. The results indicated that the cut depths decreased with increasing traverse speed and decreasing abrasive size. On the other hand, increase of the abrasive mass flow rate and water pressure led to increases in the cut depths. Additionally, it was observed that the standoff distance had no discernible effects on the cut depths. Furthermore, from the statistical analysis, it was found that the predictive models developed for the rock types had potential for practical applications. Verification of the models for using them as a practical guideline revealed a high applicability of the models within the experimental range used.     

Petrogenesis of the ü?kap?l? Granitoid and its Mafic Enclaves in Elmal? Area (Ni?de, Central Anatolia, Turkey)

The Late Cretaceous ükapili Granitoid including mafic microgranular enclaves intruded into metapelitic and metabasic rocks, and overlain unconformably by Neogene ignimbrites in the Ni de area of Turkey. It is mostly granite and minor granodiorite in composition, whereas its enclaves are dominantly gabbro with a few diorites in composition. The ükapili Granitoid is composed mainly of quartz, K-feldspar, plagioclase, biotite, muscovite and minor amphibole while its enclaves contain mostly plagioclase, amphibole, minor pyroxene and biotite. The ükapili Granitoid has calcalkaline and peraluminous (A/CNK= 1.0-1.3) geochemical characteristics. It is characterized by high LILE/HFSE and LREE/HREE ratios ((La/Lu) N = 3-33), and has negative Ba, Ta, Nb and Eu anomalies, resembling those of collision granitoids. The ükapili Granitoid has relatively high 87Sr/86Sr (i) ratios (0.711189-0.716061) and low εNd (t) values (-5.13 to -7.13), confirming crustal melting. In contrast, the enclaves are tholeiitic and metaluminous, and slightly enriched in LILEs (K, Rb) and Th, and have negative Ta, Nb and Ti anomalies; propose that they were derived from a subduction-modified mantle source. Based on mineral and whole rock chemistry data, the ükapili granitoid is H-(hybrid) type, post-collision granitoid developed by mixing/mingling processes between crustal melts and mantle-derived mafic magmas.     

Environmental effect and genetic influence: a regional cancer predisposition survey in the Zonguldak region of Northwest Turkey

The Cretaceous-Eocene volcano-sedimentary units of the Zonguldak region of the western Black Sea consist of subalkaline andesite and tuff, and sandstone dominated by smectite, kaolinite, accessory chlorite, illite, mordenite, and analcime associated with feldspar, quartz, opal-CT, amphibole, and calcite. Kaolinization, chloritization, sericitization, albitization, Fe–Ti-oxidation, and the presence of zeolite, epidote, and illite in andesitic rocks and tuffaceous materials developed as a result of the degradation of a glass shards matrix, enclosed feldspar, and clinopyroxene-type phenocrysts, due to alteration processes. The association of feldspar and glass with smectite and kaolinite, and the suborientation of feldspar-edged, subparallel kaolinite plates to fracture axes may exhibit an authigenic smectite or kaolinite. Increased alteration degree upward in which Al, Fe, and Ti are gained, and Si, Na, K, and Ca are depleted, is due to the alteration following possible diagenesis and hydrothermal activities. Micromorphologically, fibrous mordenite in the altered units and the presence of needle-type chrysotile in the residential buildings in which cancer cases lived were detected. In addition, the segregation pattern of cancer susceptibility in the region strongly suggested an environmental effect and a genetic influence on the increased cancer incidence in the region. The most likely diagnosis was Li-Fraumeni syndrome, which is one of the hereditary cancer predisposition syndromes; however, no mutations were observed in the p53 gene, which is the major cause of Li-Fraumeni syndrome. The micromorphology observed in the altered units in which cancer cases were detected may have a role in the expression of an unidentified gene, but does not explain alone the occurrence of cancer as a primary cause in the region.     

Investigation of the deep structure of the Sivas Basin (innereast Anatolia, Turkey) with geophysical methods

Sivas Basin is the easternmost and third largest basin of the Central Anatolian Basins. In this study, gravity, aeromagnetic and seismic data are used to investigate the deep structure of the Sivas Basin, together with the well seismic velocity data, geological observations from the surface and the borehole data of the Celalli-1 well. Basement depth is modeled three-dimensionally (3D) using the gravity anomalies, and 2D gravity and magnetic models were constructed along with a N–S trending profile. Densities of the rock samples were obtained from the distinct parts of the basin surface and in-situ susceptibilities were also measured and evaluated in comparison with the other geophysical and geological data. Additionally, seismic sections, in spite of their low resolution, were used to define the velocity variation in the basin in order to compare depth values and geological cross-section obtained from the modeling studies. Deepest parts of the basin (12–13 km), determined from the 3D model, are located below the settlement of Hafik and to the south of Zara towns. Geometry, extension and wideness of the basin, together with the thickness and lithologies of the sedimentary units are reasonably appropriate for further hydrocarbon exploration in the Sivas Basin that is still an unexplored area with the limited number of seismic lines and only one borehole.     

Polycyclic aromatic hydrocarbons, polychlorinated biphenyls and organochlorine pesticides in urban air of Konya, Turkey

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in urban air samples of Konya, Turkey between August 2006 and May 2007. The concentrations of pollutants in both the gas and particulate phase were separately analysed. The average total (gas + particulate) concentrations of PAHs, PCBs and OCPs were determined as 206 ng m^− 3, 0.106 ng m^− 3, 4.78 ng m^− 3 respectively. All of the investigated target compounds were dominantly found in the gas phase except OCPs. Higher air concentrations of PAHs were found at winter season while the highest concentrations of PCBs were determined in September. The highest OCPs were detected in October and in March. In urban air of Konya, PCB 28 and PCB 52 congeners represent 46% and 35% of total PCBs while Phenanthrene, Fluoranthene, Pyrene accounted for 29%, 13%, 10% of total PAHs. HCH compounds (α + β + γ + δ-HCH), total DDTs (p,p′-DDE, p,p′-DDD, p,p′-DDT), Endosulfan compounds (Endosulfan I, Endosulfan II, Endosulfan sulfate) were dominantly determined as 30%, 21%, 20% of total OCPs respectively. Considering the relation between these compounds with temperature, there was no significant correlation observed. Despite banned/restricted use in Turkey, some OCPs were determined in urban air. These results demonstrated that they are either illegally being used in the course of agricultural activity and gardens in Konya or they are residues of past use in environment. According to these results, it can be suggested that Konya is an actively contributing region to persistent organic pollutants in Turkey.