Geochemistry and sediment in the main stream of the Ca River basin,Vietnam: weathering process,solute-discharge relationships,and reservoir impact

Acta Geochimica - In this study, we investigated the chemical composition of dissolved solids in the Ca River basin, North-Central Vietnam. Water samples were collected from August 2017 to July...     

Tectonic setting of the Azores Plateau deduced from a OBS survey

The studies of Azores seismicity generally show shocks with either normal faulting or right-lateral strike-slip along the ESE direction, compatible with a eastward relative motion of the Eurasian (EU) relative to the African (AF) plate. However, the 1 January 1980 earthquake was interpreted as a clear left-lateral strike-slip shock along the N150E direction. This pattern is difficult to explain in terms of the relative motion between the EU, AF and North American (NA) plates: all available models for the present day movement of this triple junction fail to explain the regional variability in the stress conditions of the area. Here we present data from a 34-day long Ocean Bottom Seismograph array deployment. We show that the seismicity is distributed along a band aligned with the island chain itself, and is concentrated along several faults with an approximate N150E strike, cutting the Azores plateau in all the area covered by the OBS network. The combination of these new results with other geophysical data permits us to conclude that the tectonic setting of the Azores plateau is characterised by the existence of two sets of faults, in the N120E and N150E directions, defining several crustal blocks, whose relative motion accommodates the interaction of the three megaplates. The deformation of these tectonic blocks is probably driven by the shear between the EU and AF plates. This model explains well the spatial variability of the stress conditions in the Azores domain, the combination of dextral and sinistral strike slip mechanisms and the observed seismotectonics of the Azores islands.     

Timing and development of sedimentation of the Cleaverville Formation and a post‐accretion pull‐apart system in the Cleaverville area,coastal Pilbara Terrane,Pilbara, Western Australia

In the Cleaverville area of Western Australia, the Regal, Dixon Island, and Cleaverville Formations preserve a Mesoarchean lower‐greenschist‐facies volcano‐sedimentary succession in the coastal Pilbara Terrane. These formations are distributed in a rhomboidal‐shaped area and are unconformably overlain by two narrowly distributed shallow‐marine sedimentary sequences: the Sixty‐Six Hill and Forty‐Four Hill Members of the Lizard Hills Formation. The former member is preserved within the core of the Cleaverville Syncline and the latter formed along the northeast‐trending Eighty‐Seven Fault. Based on the metamorphic grade and structures, two deformation events are recognized: D₁ resulted in folding caused by a collisional event, and D₂ resulted in regional sinistral strike‐slip deformation. A previous study reported that the Cleaverville Formation was deposited at 3020 Ma, after the Prinsep Orogeny (3070–3050 Ma). Our SHRIMP U–Pb zircon ages show that: (i) graded volcaniclastic–felsic tuff within the black shale sequence below the banded iron formation in the Cleaverville Formation yields an age of (3 114 ±14) Ma; (ii) the youngest zircons in sandstones of the Sixty‐Six Hill Member, which unconformably overlies pillow basalt of the Regal Formation, yield ages of 3090–3060 Ma; and (iii) zircons in sandstones of the Forty‐Four Hill Member show two age peaks at 3270 Ma and 3020 Ma. In this way, the Cleaverville Formation was deposited at 3114–3060 Ma and was deformed at 3070–3050 Ma (D₁). Depositional age of the Cleaverville Formation is at least 40–90 Myr older than that proposed in previous studies and pre‐dates the Prinsep Orogeny (3070–3050 Ma). After 3020 Ma, D₂ resulted in the formation of a regional strike‐slip pull‐apart basin in the Cleaverville area. The lower‐greenschist‐facies volcano‐sedimentary rocks are distributed only within this basin structure. This strike‐slip deformation was synchronous with crustal‐scale sinistral shear deformation (3000–2930 Ma) in the Pilbara region.     

Quasi-static analysis of strike fault growth in layered media

We study the effects of structural inhomogeneity on the quasi-static growth of strike-slip faults. A layered medium is considered, made up of an upper layer bounded by a free surface and welded to a lower half-space with different elastic property. Mode III crack is employed as a mathematical model of strike-slip fault, which is nucleated in the lower half-space and then propagates towards the interface. We adopt FEM-β, newly proposed analysis method for failure, to simulate the quasi-statistic crack growth governed by the stress distribution in layered media. Our results show that along planar traces across interfaces a compliant upper layer has significant effects on promoting/suppressing crack growth before/after its extension into the layer and vice versa for a rigid one. This proposes a possibility that surface breaks due to strike-slip faulting could be arrested by deposit layers at the topmost part of the Earth's crust.     

A 60-year record of rainfall from the sediments of Jinheung Pond,Jeongeup, Korea

This paper describes mean grain-size data from the ¹³⁷Cs- and ²¹⁰Pb-dated sediment core BS-3 (33-cm long) recovered from Jinheung Pond, located in the southwestern part of the Korean Peninsula. Grain-size analysis of the Jinheung Pond sediments shows a clear signal for changes in annual precipitation over the past 60 years. Instrumental records of annual precipitation (AP) and the annual summation of the precipitation of >50 mm per day (AP50), which reflects the energy available for sediment transport, correlate well with the mean grain-size distributions measured in the core. The most plausible mechanism for this response in mean grain size is variations in the annual amount and intensity of precipitation. Heavy precipitation enhances soil erosion over the catchment area and increases the transport capacity of streams and rivers. Thus, coarser mean grain size should reflect higher precipitation, and smaller mean grain size should reflect lower rainfall. In the data from core BS-3, however, grain-size peaks attributed to increased annual precipitation are not prominent. This is because a dam prevents removal of fine particles from the pond via the outflow. Therefore, the mean grain-size value represents somewhat larger sediments together with fine clays. The results of this study show that sediments of dammed lakes and ponds are well suited for high-resolution environmental investigations, especially for records of changes in precipitation over time.     

Temporal variations in channel patterns and facies architecture in a gravelly fluvial system: The Paleogene Iwaki Formation on the Joban Coalfield,a forearc basin in Northeast Japan

This paper examined sequence‐stratigraphic features of a gravelly fluvial system of the Iwaki Formation, which developed in a forearc‐basin setting in Northeast Japan during the Eocene through Oligocene. On the basis of three‐dimensional architectural element analysis, we discriminated three major cycles of channel complexes, which contain ten component channel deposits in total in the fluvial succession. Component channel deposits in the uppermost part of each cycle are sandier and associated with overbank muddy deposits and coal beds as compared with those in the lower part of the cycle. Mean clast‐size also decreases upsection in the entire gravelly fluvial deposits. The fluvial succession is interpreted to have been deposited in response to an overall rise in relative sea level that was superimposed by three short‐term relative sea‐level rises on the basis of vertical stacking patterns and component lithofacies features of channel deposits, and of correlation of the fluvial succession with an age‐equivalent marine succession in an area about 50 km offshore. However, geometry and stacking patterns of the channel complexes do not exhibit any distinct temporal variation and amalgamated channel and bar deposits are dominant throughout the transgressive fluvial succession. On the other hand, an overall fining‐upward pattern of the entire Iwaki Formation fluvial deposits in association with three component fining‐upward patterns is distinct, and is interpreted to be consistent with the tenet of the standard fluvial sequence‐stratigraphic models. This indicates that the present example represents one type of variation in the standard fluvial sequence‐stratigraphic models, possibly reflecting the forearc‐basin setting, which is generally represented by higher valley slope, higher shedding of coarse‐grained sediments, and shorter longitudinal profiles to the coastal area as compared with a passive‐continental‐margin setting.     

Late Pleistocene and Holocene vegetation and climate records from Lake Kotokel, central Baikal region

Climatically driven Late Pleistocene and Holocene vegetation changes were reconstructed based on pollen records from the sediments of Lake Kotokel and Cheremushka Bog, located on the eastern shore of Lake Baikal. The described paleoenvironmental record has higher resolution than records collected from Lake Baikal and unites individual events identified in prior studies of bottom and onshore cores. Remarkable shifts in landscapes and expansions of index plants are as follows. Forest tundra and/or forest steppe landscape with birch, spruce, Artemisia, and Poaceae prevailed at ca. 50–25 ¹⁴C kyr BP. Tundra and/or steppe vegetation dominated by Artemisia and Poaceae was typical for the Last Glacial Maximum. The expansion of shrub birch and willow occurred at ca. 15.5 ¹⁴C kyr BP. Two peaks of spruce expansion at ca. 47.5–42.4 ¹⁴C kyr BP (Karginian time) and at ca. 14.5–13 ka (Bølling-Allerød warm intervals) suggest that the condition were more humid than today. A slight increase in Artemisia at ca. 11–10.5 ¹⁴C kyr BP (13–12 ka) was indicative of the Younger Dryas event. An expansion of birch forests with fir at ca. 12–6.4 ka suggests higher humidity. The currently dominant Scots and Siberian pine forests with birch expanded since 6.4 ka.     

The 21 May 2003 Tsunami in the Western Mediterranean Sea: Statistical and Wavelet Analyses

We report the statistical and wavelet analyses of the 21 May 2003 tsunami produced by an M _w 6.8–6.9 thrust earthquake in the western Mediterranean Sea using 19 tide gauge records. The largest trough-to-crest wave height was 196 cm recorded at the Sant Antoni station in the lee of the incoming tsunami wave. Except at one station, the first wave was not the largest wave at all the analyzed stations, and the largest wave arrived several hours after the first arrival. In addition, the tsunami waves persisted for more than 1 day at most stations. As the spectra of coastal tide gauge stations are strongly influenced by topographic features, special care was taken here while interpreting the results of spectral and wavelet analysis. Our wavelet analysis shows that only a peak at around 23 min is persistent for long duration, and other peaks at 14, 30, 45, and 60 min appeared at short durations. The 23-min signal is possibly associated with the width of the source fault whereas the fault length contributed to the 45-min signal. Based on these dominant periods, the tsunami source dimensions are estimated as 95 km × 45 km. The statistical and wavelet analyses performed here provide some new insights into the characteristics of the tsunami that was generated and propagated in the western Mediterranean basin.     

High-<Emphasis Type="Italic">P</Emphasis>, <Emphasis Type="Italic">T</Emphasis> phase relations in the NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> system from first principles computation

Vibrational density of states of the NaAlSi₂O₆ jadeite and NaAlSiO₄ calcium ferrite (CF)-type, and SiO₂ stishovite is calculated as a function of pressure up to 50 GPa using density functional perturbation theory. The calculated frequencies are used to determine the thermal contribution to the Helmholtz free energy within the quasi-harmonic approximation and to derive the equation of state and several thermodynamic properties of interest. A dissociation of jadeite into a mixture of a CF-type phase and stishovite is predicted to occur at 23.4 GPa and 1,800 K with a positive Clapeyron slope of 2.8 MPa/K. Elastic anisotropy for jadeite, the CF-type phase, and stishovite also computed clearly shows that stishovite and the CF-type phase are the most anisotropic and isotropic in these three phases, respectively.     

Driftwood deposition from debris flows at slit-check dams and fans

Experience shows that debris flows containing large woody debris (driftwood) can be more damaging than debris flows without driftwood. In this study, the deposition process of debris flows carrying driftwood was investigated using numerical simulations and flume experiments. Debris-flow trapping due to driftwood jamming in a slit-check dam was also investigated. A numerical model was developed with an interacting combination of Eulerian expression of the debris flow and Lagrangian expression of the driftwood, in which the fluctuating coordinates and rotation of the driftwood were treated stochastically. The calculated shapes and thicknesses of a debris-flow fan and the positions and orientations of the deposited driftwood on a debris-flow fan were consistent with experimental flume results. The jamming of driftwood in a slit-check dam was evaluated based on geometry and probability. The simulated results of outflow discharge and the proportion of driftwood passed through the slit-check dam also agreed with the experimental results.