Foraminiferal evidence of submarine sediment transport and deposition by backwash during the 2004 Indian Ocean tsunami

Micropaleontological analysis of nearshore to offshore sediments recovered from the southwestern coast of Thailand was performed to clarify the submarine processes of sediment transport and deposition during the 2004 Indian Ocean tsunami. The distribution pattern of benthic foraminifers showed seaward migration after the tsunami event. Agglutinated foraminifers, which are characteristic of an intertidal brackish environment, were identified in the post-tsunami samples from foreshore to offshore zones. These suggest that sediments originally distributed in foreshore to nearshore zones were transported offshore due to the tsunami backwash. On the other hand, the distribution pattern of planktonic and benthic species living in offshore zones showed slight evidence of landward migration by the tsunami. This suggests that landward redistribution of sediments by the tsunami run-up did not occur in the offshore seafloor of the study area. Our results and a review of previous studies provide an interpretation of submarine sedimentation by tsunamis. It is possible that tsunami backwashes induce sediment flows that transport a large amount of coastal materials seaward. Thus, traces of paleotsunami backwashes can be identified in offshore sedimentary environments as the accumulation of allochthonous materials. This can be recognized as changes in benthic foraminiferal assemblages.     

Thermodynamic analysis of Fe and Mg partitioning between plagioclase and silicate liquid

 Thermodynamic analysis of Fe- and Mg-bearing plagioclase and silicate liquid was carried out based on reported element partitioning data between plagioclase and silicate liquid in reduced conditions, solution properties of ternary feldspar, standard state properties of plagioclase endmembers and solution properties of multicomponent silicate liquid. Derived mixing properties of Fe- and Mg-bearing plagioclase are in harmony with estimated results from synthetic experiments in the systems CaAl₂Si₂O₈-CaFeSi₃O₈ and CaAl₂Si₂O₈-CaMgSi₃O₈. Based on the determined solution properties of the plagioclase, a computer program to calculate the element partition relationships between Fe- and Mg-bearing plagioclase and multicomponent silicate liquid was developed. The FeO, MgO and MgO/(MgO + FeO) in plagioclase predicted from known liquid compositions and pressure are in agreement with measurements within 0.2 wt%, 0.1 wt% and 0.1 (mol ratio), respectively. The Fe³⁺ content in plagioclase crystallized at high oxygen fugacity can be estimated with this program. The Fe³⁺/total Fe ratio in plagioclase crystallized near the quartz-fayalite-magnetite buffer ranges from 0 to 0.5, which is consistent with previous study on natural plagioclase in submarine basalt. Derived solution properties of the Fe- and Mg-bearing plagioclase are also used to calculate equilibrium composition relationship between olivine and plagioclase. Change of X _Fo in olivine coexisting with plagioclase affects MgO and FeO contents in plagioclase greatly. The present model predicts X _Fo of coexisting olivine from the chemical composition of plagioclase to ±0.1 accuracy at given pressure and temperature. Received: 27 March 1998 / Accepted: 30 September 1999     

Reducing standard errors by incorporating spatial autocorrelation into a measurement scheme for soil carbon credits

Several studies have suggested that geostatistical techniques could be employed to reduce overall transactions costs associated with contracting for soil C credits by increasing the efficacy of sampling protocols used to measure C-credits. In this paper, we show how information about the range of spatial autocorrelation can be used in a measurement scheme to reduce the size of the confidence intervals that bound estimates of the mean number of C-credits generated per hectare. A tighter confidence interval around the mean number of C-credits sequestered could increase producer payments for each hectare enrolled in a contract to supply C-credits. An empirical application to dry land cropping systems in three regions of Montana shows that information about the spatial autocorrelation exhibited by soil C could be extremely valuable for reducing transactions costs associated with contracts for C-credits but the benefits are not uniform across all regions or cropping systems. Accounting for spatial autocorrelation greatly reduced the standard errors and narrowed the confidence intervals associated with sample estimates of the mean number of C-credits produced per hectare. For the payment mechanism considered in this paper, tighter confidence intervals around the mean number of C-credits created per hectare enrolled could increase producer payments by more than 100 percent under a C-contract.     

An Issue of Permanence: Assessing the Effectiveness of Temporary Carbon Storage

In this paper, we present a method to quantify the effectiveness of carbon mitigation options taking into account the `permanence' of the emissions reduction. While the issue of permanence is most commonly associated with a `leaky' carbon sequestration reservoir, we argue that this is an issue that applies to just about all carbon mitigation options. The appropriate formulation of this problem is to ask `what is the value of temporary storage?' Valuing temporary storage can be represented as a familiar economic problem, with explicitly stated assumptions about carbon prices and the discount rate. To illustrate the methodology, we calculate the sequestration effectiveness for injecting CO₂ at various depths in the ocean. Analysis is performed for three limiting carbon price assumptions: constant carbon prices (assumes constant marginal damages), carbon prices rise at the discount rate (assumes efficient allocation of a cumulative emissions cap without a backstop technology), and carbon prices first rise at the discount rate but become constant after a given time (assumes introduction of a backstop technology). Our results show that the value of relatively deep ocean carbon sequestration can be nearly equivalent to permanent sequestration if marginal damages (i.e., carbon prices) remain constant or if there is a backstop technology that caps the abatement cost in the not too distant future. On the other hand, if climate damages are such as to require a fixed cumulative emissions limit and there is no backstop, then a storage option with even very slow leakage has limited value relative to a permanent storage option.     

The use of microstructures for discriminating turbiditic and hemipelagic muds and mudstones

The microstructures of turbiditic and hemipelagic muds and mudstones were investigated using a scanning electron microscope to determine whether there are microstructural features that can differentiate turbiditic from hemipelagic sedimentary processes. Both types of muddy deposits are, in general, characterized by randomly‐oriented clay particles. However, turbiditic muds and mudstones also characteristically contain aggregates of ‘edge‐to‐face’ contacts between clay particles with long‐axis lengths of up to 30 μm. Based on observations of the clay fabric of the experimentally‐formed muds settled from previously agitated muddy fluids, these types of aggregates, hereafter referred to as ‘aggregates of clay particles’, are interpreted as having been formed by the collision of component flocs in turbulent fluids. Furthermore, some aggregates of clay particles have ‘face‐to‐face’ contacts between clay particles; this is similar to face‐to‐face aggregates characteristically developed in fluid‐mud deposits that are commonly recognized only in turbiditic mudstones, indicating the possibility of a final stage of deposition under highly‐dense conditions, such as temporary fluid muds. In conjunction with earlier proposed lithofacies‐based and ichnofacies‐based criteria, aggregates of clay particles should be useful for the differentiation of turbiditic and hemipelagic muddy deposits, particularly with limited volumes of non‐oriented samples from deep‐water successions.     

Low‐temperature thermochronology of francolite: Insights into timing of Dead Sea Transform motion

Cambrian siliciclastic sequences along the Dead Sea Transform (DST) margin in southern Israel and southern Jordan host both detrital fluorapatite [D‐apatite] and U‐rich authigenic carbonate‐fluorapatite (francolite) [A‐apatite]. D‐apatite and underlying Neoproterozoic basement apatite yield fission‐track (FT) data reflecting Palaeozoic–Mesozoic sedimentary cycles and epeirogenic events, and dispersed (U–Th–Sm)/He (AHe) ages. A‐apatite, which may partially or completely replace D‐apatite, yields an early Miocene FT age suggesting formation by fracturing, hydrothermal fluid ascent and intra‐strata recrystallisation, linked to early DST motion. The DST, separating the African and Arabian plates, records ~105 km of sinistral strike‐slip displacement, but became more transtensional post‐5 Ma. Helium diffusion measurements on A‐apatite are consistent with thermally activated volume diffusion, indicating Tc ~52 to 56 ± 10°C (cooling rate 10°C/Ma). A‐apatite AHe data record Pliocene cooling (~35 to 40°C) during the transtensional phase of movement. This suggests that timing of important milestones in DST motion can be discerned using A‐apatite low‐temperature thermochronology data alone.     

Trends in the seasonal length and opening dates of a winter road in the western James Bay region,Ontario, Canada

Theoretical and Applied Climatology - In northern Canada, winter roads are essential for communities. The duration of the winter road season depends on particular meteorological conditions. In this...     

Atmospheric Corrections Using MODTRAN for TOA and Surface BRDF Characteristics from High Resolution Spectroradiometric/ Angular Measurements from a Helicopter Platform

l. IntroductionThe cIassicaI definition of bi--directional reflectance--distribution function (BRDF) is aderivative, distribution function, relatlng the irradiance incident from one given direction tolts contribution to the radiance renected in another direct1on (N1codemus et al., l977).f r (0,, rp,; 0,, rp, )= dL, (0,, P,; 0,, 9,; E, )/ dE, (0,, 9,) [sr-- 1 ], (l)where 0 (zenith angle) and 9 (azimuth angle) together indicate a direction, the subscr1pt i indi-cates quantities associated wi…     

Curved scanline theory

This work develops the theory of measuring fracture frequency with curved scanlines, as a direct development of work done by others on straight scanlines. Various possible shapes for curved scanlines range between triangular and rectangular, with circular as a reasonable preliminary selection. The discrepancy among different selections decreases with increasing roughness amplitude of the scanline. Analytic solutions for average fracture frequency are given for circular scanlines through single and multiple fracture sets. Results for single fracture sets are plotted. The analytic solution for the general situation of any shape scanline through multiple fracture sets is given. Analytic solutions are given and plotted for circular scanlines through a fracture fabric ellipsoid. A circular scanline spanning 180 degrees yields a global fracture frequency of statistical significance. This work was carried out under U.S. Department of Energy Contract No. DEAC03-76SF00098 for the Director, Office of Civilian Radioactive Waste Management, Office of External Relations, and was administered by the Nevada Operations Office, U.S. Department of Energy. This work also was supported partially by the Power Reactor and Nuclear Fuel Development Corporation of Japan.     

Investigation of Possible Contamination of Shallow Ground Water by Deeply Injected Liquid Industrial Wastes

The objective of this study was to assess the possible impact of deep well disposal operations, conducted between 1958 and 1974, on the ground water quality in a shallow fresh water aquifer beneath Sarnia, Ontario, Canada. Because of the breakout of formation fluids in Sarnia and Port Huron, Michigan, in the early 1970s, it had been hypothesized that liquid waste from the disposal zone in bedrock had leaked through numerous abandoned oil, gas, and salt wells in the area up to the shallow fresh water aquifer and from there to the surface.
A monitoring well network of 29 5cm (2 inch) diameter piezometers was established in the thin sand and shale aquifer system, which exists between 30 and 70m (100 and 230 feet) below ground surface. In addition, a 300m (1000 foot) deep borehole was drilled and instrumented with a Westbay multilevel casing, which permitted sampling of the disposal zone.
Ground water samples from the shallow monitoring wells and the Westbay multilevel casing were analyzed for volatiles by GC/MS. Those volatile aromatics that were conspicuously present in the deep disposal zone, e.g., ethyl toluenes and trimethyl benzene, were not detected in the shallow monitoring wells. Thus, if contaminants from the disposal zone did indeed migrate to the shallow aquifer, contamination was not widespread and probably consisted mostly of displaced chloride-rich formation waters.