Selective concentration of cesium in analcime during hydrothermal alteration,Yellowstone National Park,Wyoming

Chemical and mineralogical studies of fresh and hydrothermally altered rhyolitic material in Upper and Lower Geyser Basins, Yellowstone National Park, show that all the altered rocks are enriched in Cs and that Cs is selectively concentrated in analcime. The Cs content of unaltered rhyolite lava flows, including those from which the altered sediments are derived, ranges from 2.5 to 7.6 ppm. The Cs content of analcime-bearing altered sedimentary rocks is as high as 3000 ppm, and in clinoptilolite-bearing altered sedimentary rocks Cs content is as high as 180 ppm. Altered rhyolite lava flows which were initially vitrophyres, now contain up to 250 ppm Cs, and those which were crystallized prior to hydrothermal alteration contain up to 14 ppm. Mineral concentrates of analcime contain as much as 4700 ppm Cs. The Cs must have been incorporated into the analcime structure during crystallization, rather than by later cation substitution, because analcime does not readily exchange Cs. The $\text{Cs}\text{Cl}$ of the fluids circulating through the hydrothermal system varies, suggesting that Cs is not always a conservative ion and that Cs is lost from upflowing thermal waters due to water-rock interaction resulting in crystallization of Cs-bearing analcime.The source of Cs for Cs enrichment of the altered rocks is from leaching of rhyolitic rocks underlying the geyser basins, and from the top of the silicic magma chamber that underlies the area.Analcime is an important natural Cs sink, and the high Cs concentrations reported here may prove to be an important indicator of the environment of analcime crystallization.     

Physicochemical characteristics and levels of microbial activity in some florida peat swamps

Although microorganisms are certainly present in swamp and marsh peats, their geochemical role has not been demonstrated, in spite of their importance in determining the input to coalification processes. In order to obtain information on the gross level of microbial activity in the natural habitats, a broad-spectrum test for a type of enzyme important in the respiration of all organisms has been applied to cores of peat from a number of different environments in the Florida Everglades. In most cases, the respiratory activity in the upper layer is comparable to that in a fertile mineral soil, and this level of activity is found also at greater depths in several cores. In addition, some properties of the peat that tend to define their character as habitats for microorganisms were determined. pH values close to neutrality were observed at all sites. Chlorinity and total ionic strength naturally were high in the coastal swamps; seasonal variations in profiles in the brackish areas somewhat away from the coast suggested that some bulk flow of water through the peat into the porous limestone bedrock occurs in the rainy season. Eh profiles, regarded as empirical characterizations of environments, did differ considerably between saline and fresh water peats, though on a graphite indicator electrode were more positive than might have been expected in systems in which sulfate reduction was active. However, in these non-equilibrium systems, the potential recorded apparently depends on the nature of the electrode material used.     

The origin of the Basse Normandie duplex,Boulonnais, France

Two Hercynian duplexes are developed in Viséan limestones in the Basse Normandie quarry. The lower duplex is completely exposed in a subvertical quarry wall; the partially exposed upper duplex lies immediately above the lower duplex. The duplexes are both located in the footwall of the Hydrequent thrust which emplaced Devonian clastic sediments above the Viséan limestones. The lower duplex exposes all the internal thrusts, a reference bed of chalky limestone, the roof and floor thrusts, and the duplex tip. The duplex has been graphically restored to its pre-deformation geometry by line-length and area balancing and its resultant geometry is close to the model of Boyer & Elliott. The lower duplex shortened by two different mechanisms, an initial phase of layer-parallel shortening which produced no cleavage, followed by thrust imbrication. The average contraction of the front portion of the duplex was ?49% (natural strain) of which ?27% is layer-parallel shortening and ?22% is thrust imbrication. However, locally the bulk shortening increases from zero at the duplex tip to over ?120% in a down-dip direction. The area balancing provides the most accurate estimates of bulk shortening; line-length balance calculations give minimum estimates only. An area balance on the whole of the lower duplex gives a bulk shortening of ?84%. An area balance of the upper duplex yields an average contraction of ?75% and the total contraction produced by both duplexes is ?92%.     

Towards evaluating cloud response to climate change using clustering technique identification of cloud regimes

Most of the discrepancies in the climate sensitivity of general circulation models (GCMs) are believed to be due to differences in cloud radiative feedback. Analysis of cloud response to climate change in different ‘regimes’ may offer a more detailed understanding of how the cloud response differs between GCMs. In which case, evaluation of simulated cloud regimes against observations in terms of both their cloud properties and frequency of occurrence will assist in assessing confidence in the cloud response to climate change in a particular GCM. In this study, we use a clustering technique on International Satellite Cloud Climatology Project (ISCCP) data and on ISCCP-like diagnostics from two versions of the Hadley Centre GCM to identify cloud regimes over four different geographical regions. The two versions of the model are evaluated against observational data and their cloud response to climate change compared within the cloud regime framework. It is found that cloud clusters produced by the more recent GCM, HadSM4, compare more favourably with observations than HadSM3. In response to climate change, although the net cloud response over particular regions is often different in the two models, in several instances the same basic processes may be seen to be operating. Overall, both changes in the frequency of occurrence of cloud regimes and changes in the properties (optical depth and cloud top height) of the cloud regimes contribute to the cloud response to climate change.     

The radio frequency dielectric properties of the stratified UG1–UG2 geological unit in the Bushveld Complex

A new measurement technique enables the complex dielectric properties of the geological strata comprising the UG1–UG2 (Upper Group 1–Upper Group 2) unit of the Bushveld Complex in South Africa to be determined with unprecedented detail at radio frequencies (RF). Results of non-destructive laboratory measurements of representative diamond drill core samples from the UG1–UG2 unit are presented at 25 MHz. These data establish that the UG1 and UG2 chromitite layers are embedded in rock strata (norite, pyroxenite and anorthosite) which are translucent in the HF spectral band, whereas the chromitite layers themselves exhibit significant velocity contrast, making them good radar reflectors. The data presented here is useful for calibration of the radar system, and for predicting the range and resolution performance of borehole radars operating in both the hanging and footwalls of the economically important platiniferous UG2 reef.     

Simulated effect of a forest road on near‐surface hydrologic response: redux

In the work reported here the comprehensive physics‐based Integrated Hydrology Model (InHM) was employed to conduct both three‐ and two‐dimensional (3D and 2D) hydrologic‐response simulations for the small upland catchment known as C3 (located within the H. J. Andrews Experimental Forest in Oregon). Results from the 3D simulations for the steep unchannelled C3 (i) identify subsurface stormflow as the dominant hydrologic‐response mechanism and (ii) show the effect of the down‐gradient forest road on both the surface and subsurface flow systems. Comparison of the 3D results with the 2D results clearly illustrates the importance of convergent subsurface flow (e.g. greater pore‐water pressures in the hollow of the catchment for the 3D scenario). A simple infinite‐slope model, driven by subsurface pore‐water pressures generated from the 3D and 2D hydrologic‐response simulations, was employed to estimate slope stability along the long‐profile of the C3 hollow axis. As expected, the likelihood of slope failure is underestimated for the lower pore pressures from the 2D hydrologic‐response simulation compared, in a relative sense, to the higher pore pressures from the 3D hydrologic response simulation. The effort reported herein provides a firm quantitative foundation for generalizing the effects that forest roads can have on near‐surface hydrologic response and slope stability at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.