Residues of toxaphene in finfish and shellfish from Terry and Dupree Creeks, Georgia, U.S.A.

To better characterize human health risks associated with potentially contaminated seafood, 56 composite samples of edible tissue of several finfish and shellfish species were analyzed for residues of toxaphene using gas chromatography with electron capture and negative ion mass spectrometric detection (GC-ECD and GC-ECNI-MS). Toxaphene in these samples, collected in 1997 near a former toxaphene plant in Brunswick, Georgia, were previously reported as non-detectable using non-selective techniques. Estimated total toxaphene concentrations (ΣTOX) ranged from less than 0.01 to 26 μ g⁻¹ on a wet tissue basis. Smaller, bottom dwelling finfish such as croaker, mullet, and spot exhibited the highest ΣTOX (0.76–26 μg g⁻¹), larger predatory fish including seatrout contained intermediate levels (0.08–4.4 μg g⁻¹), and shellfish (blue crab and shrimp) contained the lowest levels (<0.01 to 0.27 μg g⁻¹). For a given species, samples from the site furthest from the toxaphene plant had lower ΣTOX than samples from the other 3 sites. On a congener specific basis, levels ranged from <0.0025 to 3.5 μg g⁻¹. Congener distributions were, in general, dominated by 2-exo, 3-endo, 6-exo,8,9,10-hexachlorobornane (Hx-Sed) and 2-endo,3-exo,5-endo,6-exo,8,9,10-heptachlorobornane (Hp-Sed), breakdown products of Cl₈−Cl₁₀ toxaphene homologs. Other prominent congeners confirmed by GC-ECNI-MS included Parlar numbers 26, 40/41, 42, 44, 50, 62, and 63, as well as several unidentified Cl₆−Cl₉ homologs. Minor differences in congener distribution among species and sampling locations suggested that exposure regimes and/or intrinsic biotransformation capabilities were not uniform. These results indicate that toxaphene residues were detectable in all species surveyed and at concentrations higher than estimated previously.     

Tracer Test to Evaluate Dilution of Ground Water from Lost Circulation

Lost circulation, the inadvertent injection of drilling fluids into a highly permeable and/or fractured aquifer during rotary drilling, may result in collection of spurious information if the lost drilling fluids are not adequately purged before sampling the ground water. The purpose of this study was to determine whether removal of the volume of water lost during coring of a monitoring well in the carbonate Scotch Grove Formation (Silurian, east central Iowa) necessarily ensures collection of representative ground water samples. To monitor dilution of the ground water due to lost circulation, rhodamine dye was added to the drilling water and dye recovery was measured in samples collected during purging of five separate 5- to 10-foot intervals.
Circulation loss occurred in all five intervals, ranging from nearly 200 gallons in the upper permeable portion of the Scotch Grove to 25 gallons in the less permeable Buck Creek Member below. When the volume of water purged from the upper three intervals corresponded to the volume of water lost during coring, the purge water still contained 11 to 20 percent dyed drilling water. As purging continued, the proportion of drilling water in the samples decreased slowly. After purging more than 200 gallons of water, 86 to 98 percent of the dyed drilling water was recovered from the five test intervals. Four traditionally measured water quality parameters-pH, temperature, specific conductance, and dissolved oxygen — were less useful than the dye recovery for distinguishing drilling water from formation water in those zones in which the ground water quality was similar to the drilling water. These results indicate that the determination of the quantity of water to be purged prior to sampling must be based, at least in part, on aquifer lithology and hydraulic characteristics.     

A Three-Dimensional Correlation/Spectral Model for Turbulent Velocities in a Convective Boundary Layer

A three-dimensional model for correlation functions and spectra in theatmospheric, convective boundary layer (CBL) is presented. The modelincludes vertical inhomogeneities introduced by eddy-blocking at the ground.By assuming the disturbance to the turbulent flow resulting from the groundblocking is irrotational, an equation is developed which allows one to writethe inhomogeneous, two-dimensional (2D) cross spectra for the blocked flowin terms of the 2D cross spectra for a homogeneous flow. VonKármán's energy spectrum then is used to determine thehomogeneous, 2D cross spectra. Although there are only two adjustableparameters in the model, the variance and a length scale, the model is shownto agree quite well with a diversity of previous results for the CBL.     

Post-flare coronal arches observed with the SMM/XRP Flat Crystal Spectrometer

The phenomenon of post-flare coronal arches, initially discovered with the Hard X-Ray Imaging Spectrometer (HXIS), was investigated using observations made with the SMM Flat Crystal Spectrometer (FCS) on 20 through 23 January, 1985. Since these observations were made with a different type of instrument from HXIS, they provide independent information on the physical characteristics of the arch phenomenon and extend our knowledge to lower coronal temperatures.Conspicuous arch activity was observed after three flares and after a disturbance which could not be identified. (1) A dynamic flare starting on 20 January at 20: 39 UT was responsible for the formation of the primary arch structure. (2) An arch revival, showing characteristics very similar to those of the arch revivals observed with HXIS, took place after the dynamic flare starting on 21 January at 23: 50 UT. The most conspicious difference relates to the moving thermal disturbance observed very shortly after the onset of the parent flare, in particular to its propagation velocity. This difference in the arch revival is probably related to the different range of plasma temperatures covered by the FCS observations (3 × 10⁶ K through 6 × 10⁶ K) and the HXIS observations (>10⁷ K) and the consequently more important effects of radiative cooling in the FCS arch revival. (3) More arch activity was observed after a (possibly dynamic) flare starting at 03: 40 UT on 21 January and (4) after an unidentified event with estimated time of occurrence near 23: 00 UT on 22 January. Similar to the arch revival, this activity was primarily characterized by the energization of (i.e., input of energy to) a pre-existing arch structure. The activity after the unidentified event suggests the existence of a mode of arch activation which is different from the typical flare-associated revival and is characterized by the absence of significant activity at chromospheric levels.     

Organic geochemistry of late Cenozoic sediments from the subtropical South Atlantic Ocean

Organic matter has been characterized in samples of Pleistocene, Pliocene, and Miocene sediments from seven Deep Sea Drilling Project sites in the subtropical South Atlantic Ocean. Organic carbon concentrations average 0.3% for most samples, and n-alkanoic acid, n-alkanol, and alkane biomarkers indicate extensive microbial reworking of organic matter in these organic-carbon-lean sediments. Samples from the easternmost parts of the South Atlantic contain an average of 4.1% organic carbon and reflect the high productivity associated with the Benguela Current. Lipid biomarkers show less microbial reworking in these sediments. Eolian transport of land-derived hydrocarbons is evident at most of these oceanic locations.     

Validation of a decadal OGCM simulation for the tropical Pacific

An ocean general circulation model is forced with NCEP reanalysis over the 1948–1999 period. The simulated dynamic height and sea level are compared respectively to the dynamic height computed from hydrological data and to the sea level measured by tide gauges in the tropical Pacific. The model is shown to capture important features of the temporal structure of variability in the tide gauge data over the last several decades. However, the comparison reveals a largely artificial trend in the simulation, which consists of a decreasing dynamic height and sea level in the southwest and northwest of the tropical Pacific. Model sensitivity experiments show this trend is controlled by the NCEP surface wind stresses and more precisely by a weakening in the trade winds and a trend in the off-equatorial wind curl, with this trend existing mainly before the mid 1970s. For studies of decadal variability, the simple removal of a linear trend is an inadequate way to solve the problem, due to the inhomogeneities in the data used in reanalysis products and the non-linearity of models.     

Evaluation of conditions along the grounding line of temperate marine glaciers: an example from Muir Inlet, Glacier Bay, Alaska

In the marine environment, stability of the glacier terminus and the location of subglacial streams are the dominant controls on the distribution of grounding-line deposits within morainal banks. A morainal bank complex in Muir Inlet, Glacier Bay, SE Alaska, is used to develop a model of terminus stability and location of subglacial streams along the grounding line of temperate marine glaciers. This model can be used to interpret former grounding-line conditions in other glacimarine settings from the facies architecture within morainal bank deposits.The Muir Inlet morainal bank complex was deposited between 1860 A.D. and 1899 A.D., and historical observations provide a record of terminus positions, glacial retreat rates and sedimentary sources. These data are used to reconstruct the depositional environment and to develop a correlation between sedimentary facies and conditions along the grounding line.Four seismic facies identified on the high-resolution seismic-reflection profiles are used to interpret sedimentary facies within the morainal bank complex. Terminus stability is interpreted from the distribution of sedimentary facies within three distinct submarine geomorphic features, a grounding-line fan, stratified ridges, and a field of push ridges. The grounding-line fan was deposited along a stable terminus and is represented on seismic-reflection profiles by two distinct seismic facies, a proximal and a distal fan facies. The proximal fan facies was deposited at the efflux of subglacial streams and indicates the location of former glacifluvial discharges into the sea. Stratified ridges formed as a result of the influence of a quasi-stable terminus on the distribution of sedimentary facies along the grounding line. A field of push ridges formed along the grounding line of an unstable terminus that completely reworked the grounding-line deposits through glacitectonic deformation.Between 1860 A.D. and 1899 A.D. (39 years),

Full-size image

m³ of sediment were deposited within the Muir Inlet morainal bank complex at an average annual sediment accumulation rate of

Full-size image

m³/a. This rate represents the annual sediment production capacity of the glacier when the Muir Inlet drainage basin is filled with glacial ice.     

From oblique subduction to intra-continental transpression: Structures of the southern Kermadec-Hikurangi margin from multibeam bathymetry,side-scan sonar and seismic reflection

The southern Kermadec-Hikurangi convergent margin, east of New Zealand, accommodates the oblique subduction of the oceanic Hikurangi Plateau at rates of 4–5 cm/yr. Swath bathymetry and sidescan data, together with seismic reflection and geopotential data obtained during the GEODYNZ-SUD cruise, showed major changes in tectonic style along the margin. The changes reflect the size and abundance of seamounts on the subducting plateau, the presence and thickness of trench-fill turbidites, and the change to increasing obliquity and intracontinental transpression towards the south. In this paper, we provide evidence that faulting with a significant strike-slip component is widespread along the entire 1000 km margin. Subduction of the northeastern scrap of the Hikurangi Plateau is marked by an offset in the Kermadec Trench and adjacent margin, and by a major NW-trending tear fault in the scarp. To the south, the southern Kermadec Trench is devoid of turbidite fill and the adjacent margin is characterized by an up to 1200 m high scarp that locally separates apparent clockwise rotated blocks on the upper slope from strike-slip faults and mass wasting on the lower slope. The northern Hikurangi Trough has at least 1 km of trench-fill but its adjacent margin is characterized by tectonic erosion. The toe of the margin is indented by 10–25 km for more than 200 km, and this is inferred to be the result of repeated impacts of the large seamounts that are abundant on the northern Hikurangi Plateau. The two most recent impacts have left major indentations in the margin. The central Hikurangi margin is characterized by development of a wide accretionary wedge on the lower slope, and by transpression of presubduction passive margin sediments on the upper slope. Shortening across the wedge together with a component of strike-slip motion on the upper slope supports an interpretation of some strain partitioning. The southern Hikurangi margin is a narrow, mainly compressive belt along a very oblique, apparently locked subduction zone.