Heat flow and thickness of the oceanic lithosphere

Existing thermal models of the oceanic lithosphere predict too sharp an increase of heat flow towards the ridge axis. A new mathematical model of a thickening lithosphere is presented. The temperature distribution is computed by the use of observed surface heat flow as a boundary condition. If observed heat flow values represent flow of heat from the mantle, the model predicts a rather rapid growth of the lithosphere within the first 30 m.y. and a nearly steady state after 100 m.y. Heat flow from the asthenosphere to the lithosphere shows a minimum near the ridge axis, suggesting a down-going convective flow in the asthenosphere at both sides of a spreading center.     

Noble gases in enstatite chondrites released by stepped crushing and heating

Abstract– Enstatite chondrites (ECs) were subjected to noble gas analyses using stepped crushing and pyrolysis extraction methods. ECs can be classified into subsolar gas‐carrying and subsolar gas‐free ECs based on the ³⁶Ar/⁸⁴Kr/¹³²Xe ratios. For subsolar gas‐free ECs, elemental ratios, and Xe isotopic compositions indicate that Q gas is the dominant trapped component, the Q gas concentration can be correlated with the petrologic type, reasonably explained by gas release from a common EC parental material during subsequent heating. Atmospheric Xe with sub‐Q elemental ratios is found in Antarctic E3s at 600–800 °C and through crushing. The ¹³²Xe released in these fractions accounts for 30–60% of the bulk concentrations. Hence, the sub‐Q signature is generally due to contamination of elementally fractionated atmosphere. Subsolar gas is mainly released (up to 78% of the bulk ³⁶Ar) at 1300–1600 °C and through crushing, suggesting that enstatite and friable phases are the host phases. Subsolar gas is isotopically identical to solar gas, but elementally fractionated. These observations are consistent with a previous study, which suggested that subsolar gas could be fractionated solar wind having been implanted into chondrule precursors ( Okazaki et al. 2001 ). Unlike subsolar gas‐free ECs, the primordial gas concentrations of subsolar gas‐carrying ECs are not simply correlated with the petrologic type. It is inferred that subsolar gas‐rich chondrules were heterogeneously distributed in the solar nebula and accreted to form subsolar gas‐carrying ECs. Subsequent metamorphic and impact‐shock heating events have affected noble gas compositions to various degrees.     

Recovery of entire shocked samples in a range of pressure from ~100 GPa to Hugoniot elastic limit

We carried out laser shock experiments and wholly recovered shocked olivine and quartz samples. We investigated the petrographic features based on optical micrographs of sliced samples and found that each recovered sample comprises three regions, I (optically dark), II (opaque), and III (transparent). Scanning electron microscopy combined with electron backscattered diffraction shows that there are no crystal features in the region I; the materials in the region I have once melted. Moreover, numerical calculations performed with the iSALE shock physics code suggest that the boundary between regions II and III corresponds to Hugoniot elastic limit (HEL). Thus, we succeeded in the recovery of the entire shocked samples experienced over a wide range of pressures from HEL (~10 GPa) to melting pressure (~100 GPa) in a hierarchical order.     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

Sound velocity and elastic properties of Fe–Ni and Fe–Ni–C liquids at high pressure

The sound velocity (V _P) of liquid Fe–10 wt% Ni and Fe–10 wt% Ni–4 wt% C up to 6.6 GPa was studied using the ultrasonic pulse-echo method combined with synchrotron X-ray techniques. The obtained V _P of liquid Fe–Ni is insensitive to temperature, whereas that of liquid Fe–Ni–C tends to decrease with increasing temperature. The V _P values of both liquid Fe–Ni and Fe–Ni–C increase with pressure. Alloying with 10 wt% of Ni slightly reduces the V _P of liquid Fe, whereas alloying with C is likely to increase the V _P. However, a difference in V _P between liquid Fe–Ni and Fe–Ni–C becomes to be smaller at higher temperature. By fitting the measured V _P data with the Murnaghan equation of state, the adiabatic bulk modulus (K _S0) and its pressure derivative (K _S ^′ ) were obtained to be K _S0 = 103 GPa and K _S ^′  = 5.7 for liquid Fe–Ni and K _S0 = 110 GPa and K _S ^′  = 7.6 for liquid Fe–Ni–C. The calculated density of liquid Fe–Ni–C using the obtained elastic parameters was consistent with the density values measured directly using the X-ray computed tomography technique. In the relation between the density (ρ) and sound velocity (V _P) at 5 GPa (the lunar core condition), it was found that the effect of alloying Fe with Ni was that ρ increased mildly and V _P decreased, whereas the effect of C dissolution was to decrease ρ but increase V _P. In contrast, alloying with S significantly reduces both ρ and V _P. Therefore, the effects of light elements (C and S) and Ni on the ρ and V _P of liquid Fe are quite different under the lunar core conditions, providing a clue to constrain the light element in the lunar core by comparing with lunar seismic data.     

Application of the Clean Development Mechanism in the Sanitation Sector: “Proof of Concept”

Greenhouse gas emissions from the waste sector account for only 4% of the total production, with wastewater management accounting for accurately 8 to 10% of this contribution. Wastewater disposal and treatment activities, mainly contributes to non‐CO₂ gases such as methane (CH₄) and nitrous oxide (N₂O). Capturing or avoiding these emissions is thus both a concern and an opportunity. The clean development mechanism (CDM) offers an instrument to internalize global climate concerns into the design of wastewater treatment facilities. Properly designed facilities could improve effluent quality and optimize the abatement of greenhouse gas emissions, thus ensuring additional revenues to pay for capital, operation and maintenance costs and possibly justify higher levels of wastewater treatment. This document summarizes the experience of the “Rio Frio CDM project” in Colombia, as an example of what is achievable through the CDM application in wastewater treatment upgrade in developing countries. This document summarizes the scope of the project, the methodology used to establish current greenhouse emissions and future reductions, and the estimated financial results.     

Pre-Japan-ARGO: Experimental Observation of Upper and Middle Layers South of the Kuroshio Extension Region Using Profiling Floats

We deployed two profiling floats in the region south of the Kuroshio Extension in March 2000. Temperature and salinity profiles from a depth of 1500 × 10⁴ Pa to the surface are reported every two and four weeks, respectively. The floats performed very well for first four months after deployment. Later they failed in surfacing for a few months when the sea surface temperature in the region was high. The salinity sensors seemed to suffer from some damage during their failure-in-surfacing period. Despite this trouble, the results clearly demonstrate that the profiling float is a very useful and cost-effective tool for physical oceanographic observation in the open sea. This revised version was published online in July 2006 with corrections to the Cover Date.     

Bottom currents in Nankai Trough and Sagami Trough

Mean flows and velocity fluctuations are described from direct measurements of bottom currents made at three stations across Nankai Trough and two stations in Sagami Trough from May 1982 to May 1984. Aanderaa current meters were moored 7 m above the bottom. The observed mean flows indicate a counter-clockwise circulation in Nankai Trough with current speeds of 0.9–2.1 cm sec^–1. The mean flows were larger on the slopes than on the flat bottom of the trough. The mean flows observed in Sagami Trough show an inflow into Sagami Bay which is considered to be a part of the Oyashio undercurrent from the north that flows along the eastern coast of Honshu. Velocity fluctuations with periods greater than 100 hr were less energetic in the troughs than those at a station west of Hachijo-jima Island. A highly energetic fluctuation with a period of 66.7 hr was observed on the northern slope of Sagami Trough in the velocity component parallel to the trough axis. A maximum current speed of 49 cm sec^–1 was observed in Sagami Trough.This study was sponsored by the Ministry of Education, Science and Culture, Japan.     

Ion microprobe analyses of oxygen three‐isotope ratios of chondrules from the Sayh al Uhaymir 290 CH chondrite using a multiple‐hole disk

Abstract– The ion microprobe is the only technique capable of determining high‐precision stable isotope ratios in individual tiny extraterrestrial particles (≤100 μm in diameter), but these small samples present special analytical challenges. We produced a new sample holder disk with multiple holes (three holes and seven holes), in which epoxy disks containing a single unknown sample and a standard grain are cast and polished. Performance tests for oxygen two‐isotope analyses using San Carlos olivine standard grains show that the new multiple‐hole disks allow accurate analysis of tiny particles if the particles are located within the 500 μm and 1 mm radius of the center of holes for seven‐hole and three‐hole disks, respectively. Using the new seven‐hole disk, oxygen three‐isotope ratios of eight magnesian cryptocrystalline chondrules (approximately 100 μm in diameter) from the Sayh al Uhaymir (SaU) 290 CH chondrite were analyzed by ion microprobe at the University of Wisconsin. Five out of eight chondrules have nearly identical oxygen isotope ratios (Δ¹⁷O = ?2.2 ± 0.6‰; 2SD), which is consistent with those of magnesian cryptocrystalline chondrules in CH/CB and CB chondrites, suggesting a genetic relationship, i.e., formation by a common (possibly impact) heating event. The other three chondrules have distinct oxygen isotope ratios (Δ¹⁷O values from ?6.4‰ to +2.2‰). Given that similar variation in Δ¹⁷O values was observed in type I porphyritic chondrules in a CH/CB chondrite, the three chondrules may have formed in the solar nebula, similar to the type I porphyritic chondrules.     

Cosmic‐ray exposure age and heliocentric distance of the parent body of the Rumuruti chondrite PRE 95410

We measured concentrations and isotopic ratios of noble gases in the Rumuruti (R) chondrite Mount Prestrud (PRE) 95410, a regolith breccia exhibiting dark/light structures. The meteorite contains solar and cosmogenic noble gases. Based on the solar and cosmogenic noble gas compositions, we calculated a heliocentric distance of its parent body, a cosmic‐ray exposure age on the parent body regolith (parent body exposure age), and a cosmic‐ray exposure age in interplanetary space (space exposure age) of the meteorite. Assuming a constant solar wind flux, the estimated heliocentric distance was smaller than 1.4 ± 0.3 au, suggesting inward migration from the asteroid belt regions where the parent body formed. The largest known Mars Trojan 5261 Eureka is a potential parent body of PRE 95410. Alternatively, it is possible that the solar wind flux at the time of the parent body exposure was higher by a factor of 2–3 compared to the lunar regolith exposure. In this case, the estimated heliocentric distance is within the asteroid belt region. The parent body exposure age is longer than 19.1 Ma. This result indicates frequent impact events on the parent body like that recorded for other solar‐gas‐rich meteorites. Assuming single‐stage exposure after an ejection event from the parent body, the space exposure age is 11.0 ± 1.1 Ma, which is close to the peak of ~10 Ma in the exposure age distribution for the solar‐gas‐free R chondrites.